Eximkey - India Export Import Policy 2004 2013 Exim Policy
APPENDIX 35

FORMATS FOR
CLAIMING DUTY DRAWBACK ON ALL INDUSTRY RATES/FIXATION OF DRAWBACK RATES/
REFUND OF TERMINAL EXCISE DUTY

DBK I STATEMENT

Description of the Export Product supplied _____________________ Bill of Materials* issued for manufacture of (No.of units of the export product).

*(Bill of materials should consist of raw materials and components going into the manufacture of export product supplied and the actual packing materials used).

S. No. Name of the material/ component Quality Technical characteristics Whether imported or indigenous Unit Gross qty. required Wastage Qty

Irrevo recover Cable able
1 2 3 4 5 6 7 8 9
         

Sale Price of waste per unit of Qty By Product/ co product Net wt of the material Remarks
 Qty. Sale value per unit   
10 11 12 13 14
     

Give convenient units by which goods are invoiced for export (e.g. per tonne, per dozen/Pcs., per Sq. meter etc).

Notes:-

1. The Units of quantity to be furnished in Col.6 should be given in such a manner that it could be related to Statements II and III respectively.

2. Maintenance stores/materials such as lubricating oil, greases, fuel etc. which are employed to run the machinery and plant should be excluded.

3. The data for packing materials should be for the same unit quantity for which data for export product for raw materials and components have been given.

4. Only those raw materials/components etc. to be indicated for which proof of payment of Customs/Central Excise duties is shown in DBK-II/III. Details of such inputs need not be given where no benefit of duty paid is claimed because of MODVAT or absence of proof of duty. Only a brief mention of such inputs being used would be sufficient.

CERTIFICATE REQUIRED FOR DBK I STATEMENT

1. On behalf of the applicant, I hereby certify that the materials as mentioned above are actually required and being used for production of export product.



Station _____________

Dated _____________
Signature _________________
(Name & Designation of the Chief
Executive/Production incharge (with seal.)

II. It is certified that (To be given by an independent Chartered Engineer):

a) The consumption of various materials shown in DBK-I has been examined by us and these are actually required and being consumed in the factory of production for manufacture of export product supplied as checked by us on verification of the production process and relevant technical and related documents.

b) The imported materials above shown in DBK-I are being actually used in the manufacture of the export product supplied and are not being substituted by indigenous materials;

c) The wastage /co-product/by-product claimed are as per production process in the factory. There is no suppression of co-product/by-products. The wastages claimed in our views are reasonable and are comparable to the general norms for the industry. Where wastages are considered high, an indication of the normal wastage in the industry has been indicated by us, under "Remarks" column.









Place___________

Date____________
Signature____________________________

Name_______________________________

Designation__________________________

Address_____________________________

Branch of Engg.

in which qualified:_____________________



Name & Address of the institution :
under which Chartered.Ref.No.and date
of membership.
_____________________________________
_____________________________________
_____________________________________


DBK II STATEMENT

Direct import of materials/components made by the manufacturer and foreign materials obtained locally by the manufacturer during the period commencing three months prior to the date of supply /first supply upto the date of application, for manufacture of ______________________ (Name of export product supplied).

S.No. Description Techni-cal charac-terist-ics S.No. in DBK 1 statement B/E No. & date under which imported Name of the Customs House Unit Qty. imported originally Assessable value
1 2 3 4 5 6 7 8 9
         

Heading No. in Customs Tariff Act, 1975 Rate of duty Country from which imported and name of supplier Is assessment final Basic duty + Additional Customs Duty Name and full address of the supplier in case the foreign material/ Components obtained locally remarks
10 11 12 13 14 15 16
       

Notes:

1. If any of the materials mentioned above have also been procured from indigenous origin, this must be specifically stated in remarks column and full details of the procurement alongwith proof of payment of duty should be furnished in DBK-III statement, even if it is claimed that they are not used in the products exported.

2. Minor items which do not contribute to any significant proportion to the expected drawback rates may be ignored, at the discretion of the applicant.

3. If the assessment against any B/E is not final the nature of dispute may be clearly indicated supported by appropriate letter from concerned customs authorities. Normally no DBK is admitted for provisionally assessed B/Es.

4. Refund application made against any B/E, with details must be indicated.

5. Stock position of the above materials/Components also to be given separately (in linked statement II-A).

CERTIFICATE REQUIRED FOR DBK II STATEMENT

Certified that the particulars mentioned in this statement are correct to the best of my knowledge and belief and no claims for refund of duty in respect of any of the above mentioned bills of entries (other than whose details are furnished) has been or will be lodged with the customs Authorities.



Signature and Stamp of independent
Chartered Accountant/Cost Accountant
Signature ___________________
(Name & Designation of the Chief
Executive/ Production incharge
(with seal.)

Place:
Date:

DBK II A STATEMENT

Details of procurements relating to stock of imported materials as on commencement *date (*the date three months prior to the date of supply /first supply required for the manufacture of ____________________________(Name of export product supplied).

S.No. Description Techni-cal Characteristics S.No. in DBK I statement B/E No. and date coveringthe imported stock Name of the Customs House Unit Qty. imported originally Assessa-ble value
1 2 3 4 5 6 6A 7 8
         

Heading no. in Customs tariff Act, 1975 Rate of duty Country from where imported & name of supplier Is assesment final Basic duty + Addl customs duty Name and full address of the supplier in case the foreign materials/ components obtained locally Stock as on ___ Remark
9 10 11 12 13 13A 14 15 16
        

Note:-

1. In this statement furnish details of stock of all the imported inputs mentioned in statements II which were in stock 3 months prior to the date of shipment/first shipment of the export product and how these were imported/procured. (Actual stock to be given under Col.15, with procurement details in other Columns).

2. If the assessment for any of the inputs in stock as shown is not final, the nature and current status of dispute may be clearly indicated. (Normally no DBK for provisionally assessed B/E are admitted).

3. Refund applications made if any for procurement shown in stock with details to be indicated.

4. Photocopies of all Bills of Entries mentioned above must be enclosed.

CERTIFICATE REQUIRED FOR DBK II A STATEMENT

Certified that the particulars mentioned in this statement are correct to the best of my knowledge and belief and no claims for refund of duty in respect of any of the above mentioned bills of entries has been or will be lodged with the Customs Authorities.

Signature and Stamp of independent
Chartered Accountant/Cost Accountant
Signature ___________________
(Name & Designation of the Chief
Executive/ Production incharge
(with seal.)

Place:
Date:

DBK III STATEMENT

Materials/Components of Indian Origin obtained by the manufacturer during the period commencing three months prior to the date of supply /first supply upto the date of application for the manufacture of ____________________ (Name of export product supplied).

Sl.No. Description Technical Characteristics S.No. in DBK-I statement Unit Qty purchased Assessable value Central excise tariff Heading no.
1 2 3 4 5 6 7 8
        

Effective rate of duty paid Amount of duty paid Name and address of supplier Invoice No.and date Is assessment on duty final Remark
9 10 11 12 13 14
      

Notes:-

1. In this statement details of only those items which are chargeable to the excise duty to be given for which proof of Central Excise duty can be established by Invoices.

2. Materials/Components specified in Drawback II Statement if these are also of indigenous origin and procured locally should be included in this statement, whether dutiable or not. This is irrespective of the fact whether the said materials/components are used for export production or not. Where the said materials/components are claimed to be only for manufacture of goods for local sales and not for exports, this should be specifically indicated in the ‘Remarks’ column, against the respective serial number of the said material/component.

3. The particulars of Invoice numbers and date where the applicant is the consignee should be furnished under col.11. Photocopies of all Invoices for inputs which are subject to Central Excise Duties of 20% or higher and some representative copies for other Invoices must be enclosed.

4. If the assessment which is not final or duty is paid under protest the extent of dispute may please be clearly indicated (copy of S V B Order to be attached).

5. Refund applications made if any against any Invoice with Details, to be indicated.

CERTIFICATE REQUIRED FOR DBK III STATEMENT

Certified that the particulars mentioned in this statement are correct to the best of my knowledge and belief and no claims for refund of duty in respect of any of the above mentioned materials/components procured against Invoices/ subsidiary Invoices has been or will be lodged with the Central Excise Authorities.



Signature and Stamp of independent
Chartered Accountant/Cost Accountant
Signature ___________________
(Name & Designation of the Chief
Executive/ Production incharge
(with seal.)

Place:
Date:

STATEMENT DBK III A

Details of procurements relating to stocks of indigenous materials as on commencement to (the date three months prior to the date of supply/first supply)

S. No. Description Technical Characteristics S.No. in DBK-I statement Unit Qty purchased originally Assessable value Central Excise Tariff heading no.
1 2 3 4 4A 5 6 7
        

Effective rate of interest Amount of duty paid Name and address of supplier Invoice No. and date Is assessment of duty final Stocks as on _____ Remark
8 9 10 11 12 13 14
       

Notes:-

1. In this statement furnish details of stock of all the indigenous materials mentioned in statements I & III which were in stock three months prior to date of shipment/first shipment of the export product and how these were procured (including Invoices Nos.etc.).

1A .In this statement details of only those items which are chargeable to the Excise Duty may be given for which proof of payment of Central Excise duty can be established.

2. The particular of Invoice number, date etc. should be furnished in Column.11.

3. If the assessment which is not final or duty is paid under protest the extent of dispute may please be clearly indicated.

4. Refund applications made if any with details to be indicated.

CERTIFICATE REQUIRED FOR DBK III A STATEMENT

Certified that the particulars mentioned in this statement are correct to the best of my knowledge and belief and no claims for refund of duty in respect of any of the above mentioned materials/components has been or will be lodged with the Central Excise Authorities.

Signature and Stamp of independent
Chartered Accountant/Cost Accountant
Signature ___________________
(Name & Designation of the Chief
Executive/ Production incharge
(with seal.)

Place:
Date:

Presented by eximkey.com

Trade Intelligence
Search for latest information on item wise exports and imports, from all major Indian ports.

Username
Password