Eximkey - India Export Import Policy 2004 2013 Exim Policy
DGFT Notification, Circulars... Public Notices Public Notices w.e.f 05/06/2012 PUBLIC NOTICE NO. 33/2012, DT. 30/11/2012
PUBLIC NOTICE NO. 33/2012, DT. 30/11/2012

Amendment in SION
 

In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2009-14 and Paragraph 1.1 of the Handbook of Procedures (Vol.1), the Directorate General of Foreign Trade hereby notifies the following in Handbook of Procedure Vol.II (SION Book):-

2. The existing entry at SION C-469 is as follows:-
 

SION Export Product Quantity Import Items Quantity
C-469 Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/ hoops & Strips/ Wide Coils having Zinc coating of 180 gm per Sq.m @40 Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq.Mtr. Per litr. As Backer given in Engineering Table 1. 1000 kg 1. Non Alloy Hot Rolled Steel Sheets/ Strips/ Wide Coils 1130 kgs.
2.Rolling Mill Rolls 1.25 kgs.
3.Rolling Oil 0.35 kg.
4.Pickling Oil 0.45 kg.
5.Steel Strapping 2.0 kgs.
6.VCI Rusto - Paper 5.0 Sq.mtrs.
7.Zinc *
8.Guard Film *
9.Paints (Ltrs.)
(a) Primer
(b) Tap Coat
(c) Backer		 *
* Note : While the quantity of item nos. 1 to 6 will remain the same for all thickness of the product, the quantity of items 7 to 9 will be as per the Engineering Table 1 given at end of this product group.


3. SION at S. No. C-469 is now modified as under:-
 

SION Export Product Quantity Import Items Quantity
C-469 Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/Hoops & Strips/Wide Coils (Plain/Corrugated) having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron 1000 Kgs. 1.(a) Cold Rolled Galvanised Non Alloy Steel Strips/Wide Coils
Or		 (a) 1.01 x Cold Rolled Galvanised Steel content as specified in Engg. Table-1 A
Or
(b) Cold Rolled Full Hard/Close Annealed Non Alloy Steel Strips/ Wide Coils
Or		 b) 1.05 x Cold Rolled Steel content as specified in Engg. Table-1 B
Or
(c) Hot Rolled Non Alloy Steel Strips/Wide Coils c) 1.118 x Cold Rolled Steel content as specified in Engg. Table-1 B
2.Paint-Primer (litre) As per Engg. Table-1A
3.Paint-Back Coat (litre) As per Engg. Table-1A
4.Paint-Top Coat (litre) As per Engg. Table-1A
5.Zinc Slab/ Ingots (kg) 1.1 x Zinc content as specified in Engg. Table-1C
6.Rolling Mill Rolls 1.25 Kg.
7.Rolling Oil 0.35 Kg.
8.Pickling Oil 0.45 Kg.
9.Steel Strappings/ Galvanised Plain Sheets for packing As per packing Policy
10.VCI Rusto Paper 5.0 Sq.Mtr.
11.Guard Film (kg.) As per Engg. Table-1A
12.Applicator Rolls 0.13 Kg.
Note: (i) Import Item No. 5 will be allowed, only when import item no. 1(b) or 1(c) is imported.

(ii) Import Item Nos. 6 & 7 will be allowed, only when import item no. 1(c) is imported

(iii) Import Item No. 8 will be allowed, only when import item no. 1(b) or 1(c) is imported
 


4. New SION at Serial number C-2054 shall be as under:-
 

SION Export Product Quantity Import Items Quantity
C-2054 Cold Rolled Un-Galvanised Colour Coated Non Alloy Steel Sheets/Hoops & Strips/Wide Coils having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron 1000 Kg. 1.(a) Cold Rolled Full Hard/Close Annealed Non Alloy Steel Strips/ Wide Coils
Or		 (a) 1.01 x Cold Rolled Steel content as specified in Engg. Table-1D
Or
(b) Hot Rolled Non Alloy Steel Strips/ Wide Coils b) 1.10 x Cold Rolled Steel content as specified in Engg. Table-1D
2.Paint-Primer (litre ) As per Engg. Table-1D
3.Paint-Back Coat (litre ) As per Engg. Table-1D
4.Paint-Top Coat (litre ) As per Engg. Table-1D
5.Rolling Mill Rolls 1.25 Kg.
6.Rolling Oil 0.35 Kg.
7.Pickling Oil 0.45 Kg.
8.Steel Strappings/ Galvanised Plain Sheets for Packing As per Packing Policy
9.VCI Rusto Paper 5.0 Sq.Mtr.
10.Guard Film (kg.) As per Engg. Table-1D
11.Applicator Rolls 0.13 Kg.
Note: (i) Import Item Nos. 5 & 6 will be allowed, only when import item no. 1(b) is imported.


5. New SION at Serial number C-2055 shall be as under:-

SION Export Product Quantity Import Items Quantity
C-2055 Cold Rolled Zinc (43.5%) & Aluminium Silicon (56.5%) Alloy Coated Colour Coated Non Alloy Steel Sheets/ Strips/Wide Coils (Plain/ Corrugated) having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron 1000 Kg. 1.(a) Cold Rolled Zinc (43.5%) & Aluminium-Silicon (56.5%) Alloy Coated Non Alloy Steel Strips/ Wide Coils
Or		 (a) 1.01 x Cold Rolled Zinc (43.5%) & Aluminium-Silicon (56.5%) Alloy Coated Steel content as specified in Engg. Table-1E
Or
(b) Cold Rolled Non Alloy Steel Strips/Wide Coils
Or		 (b) 1.05 x Cold Rolled Steel content as specified in Engg. Table-1F
Or
(c) Hot Rolled Non Alloy Steel Strips/ Wide Coils (c) 1.118 x Cold Rolled Steel content as specified in Engg. Table-1F
2.Paint-Primer (litre) As per Engg. Table-1E
3.Paint-Back Coat (litre) As per Engg. Table-1E
4.Paint-Top Coat (litre) As per Engg. Table-1E
5.Zinc Slab/ Ingots (kg.) 1.15 x 0.435 x Zinc-AL-SI content as specified in Engg. Table-1G
6.Aluminium Silicon Alloy Slab/Ingots (kg.) 1.15 x 0.565 x Zinc-AL-SI content as specified in Engg. Table-1G
7.Rolling Mill Rolls 1.25 Kg.
8.Rolling Oil 0.35 Kg.
9.Pickling Oil 0.45 Kg.
10.Steel Strappings/ Galvanised Plain Sheets for packing As per Packing Policy
11.VCI Rusto Paper 5.0 Sq.Mtr.
12.Guard Film (kg.) As Per Engg. Table-1E
13.Applicator Rolls 0.13 Kg.
Note: (i) Import Item Nos. 5 & 6 will be allowed, only when import item no. 1(b) or 1(c) is imported

(ii) Import Item Nos. 7 & 8 will be allowed, only when import item no. 1(c) is imported

(iii) Import Item No. 9 will be allowed, only when import item no.1 (b) or 1(c) is imported.
 


6. The existing Engineering Table 1 in Handbook of Procedures Vol.II is hereby deleted and is substituted by Engineering Tables 1A, 1B, 1C, 1D, 1E, 1F and 1G which are annexed to this Public Notice.

7. Effect of Public Notice:-

(i) Existing SION C-469 has been modified. Non Alloy Cold Rolled Steel is added as an input. Based upon the thickness of the export product, quantity of corresponding inputs has been prepared in tabular form as mentioned in Engineering Tables 1A, 1B and 1C.

(ii) Two new SIONs are notified for export products “Cold Rolled colour coated non alloy steel sheets” and “Cold Rolled Zinc & Aluminium Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets”.

(iii) Engineering Table 1 is substituted by comprehensive Engineering Tables 1A, 1B, 1C, 1D, 1E, 1F and 1G which denote the export product and corresponding inputs.
 

(Anup K. Pujari)
Director General of Foreign Trade
E-mail: dgft@nic.in

(Issued from File No. 01/81/162/246/AM13/DES-II)
 

ENGINEERING TABLE-1A (PPGI)
 

Export Product: Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/hoops & strips/ wide coils )(Plain / Corrugated)
Sl.No. Export Product Thickness Range (In mm) Paints Guard Film (Kg) Content of Substrate (CR Galvanised) (kgs
a b Primer (litre) Back Coat (litre) Top Coat (litre)
1 0.10 0.12 38.218 46.066 81.895 66.93 904.058
2 0.13 0.15 27.731 33.426 59.423 48.56 930.384
3 0.16 0.18 21.760 26.229 46.629 38.11 945.373
4 0.19 0.21 17.905 21.582 38.368 31.36 955.051
5 0.22 0.24 15.210 18.334 32.593 26.64 961.816
6 0.25 0.27 13.220 15.935 28.329 23.15 966.811
7 0.28 0.3 11.691 14.092 25.052 20.47 970.651
8 0.31 0.33 10.479 12.631 22.455 18.35 973.694
9 0.34 0.36 9.494 11.444 20.345 16.63 976.165
10 0.37 0.39 8.679 10.461 18.598 15.20 978.212
11 0.40 0.42 7.993 9.634 17.127 14.00 979.935
12 0.43 0.45 7.407 8.928 15.872 12.97 981.406
13 0.46 0.48 6.901 8.318 14.788 12.09 982.676
14 0.49 0.51 6.460 7.787 13.843 11.31 983.783
15 0.52 0.54 6.072 7.319 13.011 10.63 984.757
16 0.55 0.57 5.728 6.904 12.274 10.03 985.621
17 0.58 0.6 5.420 6.534 11.615 9.49 986.392
18 0.61 0.63 5.145 6.201 11.024 9.01 987.085
19 0.64 0.66 4.895 5.901 10.490 8.57 987.711
20 0.67 0.69 4.669 5.628 10.005 8.18 988.278
21 0.70 0.72 4.463 5.379 9.564 7.82 988.796
22 0.73 0.75 4.274 5.152 9.159 7.49 989.270
23 0.76 0.78 4.101 4.943 8.787 7.18 989.705
24 0.79 0.81 3.941 4.750 8.445 6.90 990.107
25 0.82 0.84 3.793 4.572 8.128 6.64 990.478
26 0.85 0.87 3.656 4.407 7.834 6.40 990.823
27 0.88 0.9 3.528 4.253 7.560 6.18 991.143
28 0.91 0.93 3.409 4.109 7.305 5.97 991.442
29 0.94 0.96 3.298 3.975 7.067 5.78 991.721
30 0.97 0.99 3.194 3.850 6.844 5.59 991.983
31 1.00 1.02 3.096 3.732 6.634 5.42 992.228
32 1.03 1.05 3.004 3.621 6.437 5.26 992.459
33 1.06 1.08 2.917 3.516 6.251 5.11 992.677
34 1.09 1.11 2.835 3.418 6.076 4.97 992.882
35 1.12 1.14 2.758 3.324 5.910 4.83 993.077
36 1.15 1.17 2.685 3.236 5.753 4.70 993.260
37 1.18 1.2 2.615 3.152 5.604 4.58 993.435
38 1.21 1.23 2.549 3.073 5.463 4.46 993.600
39 1.24 1.26 2.486 2.997 5.328 4.35 993.758
40 1.27 1.29 2.427 2.925 5.200 4.25 993.908
41 1.30 1.32 2.370 2.857 5.078 4.15 994.051
42 1.33 1.35 2.316 2.791 4.962 4.06 994.187
43 1.36 1.38 2.264 2.729 4.851 3.96 994.317
44 1.39 1.41 2.214 2.669 4.745 3.88 994.442
45 1.42 1.44 2.167 2.612 4.643 3.79 994.561
46 1.45 1.47 2.121 2.557 4.545 3.71 994.675
47 1.48 1.5 2.078 2.504 4.452 3.64 994.784
48 1.51 1.53 2.036 2.454 4.362 3.57 994.890
49 1.54 1.56 1.996 2.405 4.276 3.49 994.990
50 1.57 1.59 1.957 2.359 4.193 3.43 995.087
51 1.60 1.62 1.920 2.314 4.114 3.36 995.181


ENGINEERING TABLE-1B (PPGI)

Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils (Plain / Corrugated)
Sl. No. Export Product Thickness Range (mm) CR Content (kgs) for different thickness of export product and different Zinc coating class in gms/m2
a b  
      30-49 50-69 70-89 90-109 110-129 130-149 150-169
1 0.10 0.12 843.0 811.0 778.8 746.4 713.8 681.0 648.0
2 0.13 0.15 885.4 862.1 838.8 815.3 791.8 768.1 744.3
3 0.16 0.18 909.7 891.5 873.2 854.8 836.4 817.8 799.3
4 0.19 0.21 925.6 910.5 895.5 880.4 865.2 850.0 834.8
5 0.22 0.24 936.7 923.9 911.1 898.3 885.4 872.5 859.6
6 0.25 0.27 944.9 933.8 922.7 911.5 900.4 889.2 877.9
7 0.28 0.30 951.2 941.4 931.6 921.7 911.8 902.0 892.1
8 0.31 0.33 956.2 947.4 938.6 929.8 921.0 912.1 903.2
9 0.34 0.36 960.3 952.4 944.4 936.4 928.4 920.3 912.3
10 0.37 0.39 963.7 956.4 949.1 941.8 934.5 927.2 919.8
11 0.40 0.42 966.6 959.9 953.1 946.4 939.7 932.9 926.2
12 0.43 0.45 969.0 962.8 956.6 950.3 944.1 937.8 931.6
13 0.46 0.48 971.1 965.3 959.5 953.7 947.9 942.1 936.3
14 0.49 0.51 973.0 967.5 962.1 956.7 951.2 945.8 940.3
15 0.52 0.54 974.6 969.5 964.4 959.3 954.2 949.0 943.9
16 0.55 0.57 976.0 971.2 966.4 961.6 956.7 951.9 947.1
17 0.58 0.60 977.3 972.7 968.2 963.6 959.1 954.5 949.9
18 0.61 0.63 978.5 974.1 969.8 965.5 961.1 956.8 952.5
19 0.64 0.66 979.5 975.4 971.3 967.1 963.0 958.9 954.8
20 0.67 0.69 980.4 976.5 972.6 968.7 964.7 960.8 956.9
21 0.70 0.72 981.3 977.5 973.8 970.0 966.3 962.5 958.8
22 0.73 0.75 982.1 978.5 974.9 971.3 967.7 964.1 960.5
23 0.76 0.78 982.8 979.4 975.9 972.5 969.0 965.6 962.1
24 0.79 0.81 983.5 980.2 976.9 973.5 970.2 966.9 963.6
25 0.82 0.84 984.1 980.9 977.7 974.5 971.3 968.1 965.0
26 0.85 0.87 984.7 981.6 978.5 975.5 972.4 969.3 966.2
27 0.88 0.90 985.2 982.2 979.3 976.3 973.3 970.4 967.4
28 0.91 0.93 985.7 982.8 980.0 977.1 974.2 971.4 968.5
29 0.94 0.96 986.2 983.4 980.6 977.9 975.1 972.3 969.5
30 0.97 0.99 986.6 983.9 981.2 978.6 975.9 973.2 970.5
31 1.00 1.02 987.0 984.4 981.8 979.2 976.6 974.0 971.4
32 1.03 1.05 987.4 984.9 982.4 979.8 977.3 974.8 972.2
33 1.06 1.08 987.8 985.3 982.9 980.4 978.0 975.5 973.0
34 1.09 1.11 988.1 985.7 983.3 981.0 978.6 976.2 973.8
35 1.12 1.14 988.4 986.1 983.8 981.5 979.2 976.8 974.5
36 1.15 1.17 988.7 986.5 984.2 982.0 979.7 977.5 975.2
37 1.18 1.20 989.0 986.8 984.6 982.4 980.2 978.0 975.8
38 1.21 1.23 989.3 987.2 985.0 982.9 980.7 978.6 976.4
39 1.24 1.26 989.6 987.5 985.4 983.3 981.2 979.1 977.0
40 1.27 1.29 989.8 987.8 985.7 983.7 981.7 979.6 977.6
41 1.30 1.32 990.1 988.1 986.1 984.1 982.1 980.1 978.1
42 1.33 1.35 990.3 988.3 986.4 984.4 982.5 980.5 978.6
43 1.36 1.38 990.5 988.6 986.7 984.8 982.9 981.0 979.1
44 1.39 1.41 990.7 988.8 987.0 985.1 983.3 981.4 979.5
45 1.42 1.44 990.9 989.1 987.3 985.4 983.6 981.8 980.0
46 1.45 1.47 991.1 989.3 987.5 985.8 984.0 982.2 980.4
47 1.48 1.50 991.3 989.5 987.8 986.0 984.3 982.5 980.8
48 1.51 1.53 991.5 989.7 988.0 986.3 984.6 982.9 981.2
49 1.54 1.56 991.6 989.9 988.3 986.6 984.9 983.2 981.6
50 1.57 1.59 991.8 990.1 988.5 986.9 985.2 983.6 981.9
51 1.60 1.62 991.9 990.3 988.7 987.1 985.5 983.9 982.3


ENGINEERING TABLE-1B (PPGI)

Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils (Plain / Corrugated)
Sl. No. Export Product Thickness Range (mm) CR Content (kgs) for different thickness of export product and different Zinc coating class in gms/m2
a b  
      170-189 190-209 210-229 230-249 250-269 270-289 290-309
1 0.10 0.12 614.8 581.3 547.7 513.8 479.7 445.4 410.9
2 0.13 0.15 720.4 696.4 672.3 648.1 623.8 599.3 574.8
3 0.16 0.18 780.6 761.9 743.1 724.3 705.4 686.4 667.3
4 0.19 0.21 819.5 804.1 788.8 773.3 757.9 742.3 726.8
5 0.22 0.24 846.6 833.7 820.6 807.6 794.5 781.4 768.2
6 0.25 0.27 866.7 855.4 844.1 832.8 821.5 810.1 798.7
7 0.28 0.30 882.1 872.2 862.2 852.2 842.2 832.2 822.1
8 0.31 0.33 894.3 885.4 876.5 867.6 858.6 849.7 840.7
9 0.34 0.36 904.3 896.2 888.1 880.0 872.0 863.8 855.7
10 0.37 0.39 912.5 905.1 897.8 890.4 883.0 875.6 868.2
11 0.40 0.42 919.4 912.6 905.9 899.1 892.3 885.4 878.6
12 0.43 0.45 925.3 919.0 912.8 906.5 900.2 893.9 887.6
13 0.46 0.48 930.4 924.6 918.7 912.9 907.0 901.1 895.3
14 0.49 0.51 934.9 929.4 923.9 918.4 913.0 907.5 902.0
15 0.52 0.54 938.8 933.6 928.5 923.4 918.2 913.0 907.9
16 0.55 0.57 942.2 937.4 932.6 927.7 922.8 918.0 913.1
17 0.58 0.60 945.3 940.8 936.2 931.6 927.0 922.4 917.8
18 0.61 0.63 948.1 943.8 939.4 935.1 930.7 926.4 922.0
19 0.64 0.66 950.6 946.5 942.4 938.2 934.1 929.9 925.8
20 0.67 0.69 952.9 949.0 945.0 941.1 937.1 933.2 929.2
21 0.70 0.72 955.0 951.2 947.5 943.7 939.9 936.1 932.3
22 0.73 0.75 956.9 953.3 949.7 946.1 942.5 938.8 935.2
23 0.76 0.78 958.6 955.2 951.7 948.3 944.8 941.3 937.8
24 0.79 0.81 960.3 956.9 953.6 950.3 946.9 943.6 940.3
25 0.82 0.84 961.8 958.6 955.4 952.1 948.9 945.7 942.5
26 0.85 0.87 963.1 960.1 957.0 953.9 950.8 947.7 944.6
27 0.88 0.90 964.4 961.4 958.5 955.5 952.5 949.5 946.5
28 0.91 0.93 965.6 962.7 959.9 957.0 954.1 951.2 948.3
29 0.94 0.96 966.7 964.0 961.2 958.4 955.6 952.8 950.0
30 0.97 0.99 967.8 965.1 962.4 959.7 957.0 954.3 951.6
31 1.00 1.02 968.8 966.2 963.6 960.9 958.3 955.7 953.1
32 1.03 1.05 969.7 967.2 964.6 962.1 959.6 957.0 954.5
33 1.06 1.08 970.6 968.1 965.7 963.2 960.7 958.3 955.8
34 1.09 1.11 971.4 969.0 966.6 964.2 961.8 959.4 957.1
35 1.12 1.14 972.2 969.9 967.5 965.2 962.9 960.6 958.2
36 1.15 1.17 972.9 970.7 968.4 966.1 963.9 961.6 959.3
37 1.18 1.20 973.6 971.4 969.2 967.0 964.8 962.6 960.4
38 1.21 1.23 974.3 972.1 970.0 967.8 965.7 963.5 961.4
39 1.24 1.26 974.9 972.8 970.7 968.6 966.5 964.4 962.3
40 1.27 1.29 975.5 973.5 971.4 969.4 967.3 965.3 963.2
41 1.30 1.32 976.1 974.1 972.1 970.1 968.1 966.1 964.1
42 1.33 1.35 976.7 974.7 972.7 970.8 968.8 966.9 964.9
43 1.36 1.38 977.2 975.3 973.4 971.5 969.5 967.6 965.7
44 1.39 1.41 977.7 975.8 973.9 972.1 970.2 968.3 966.5
45 1.42 1.44 978.2 976.3 974.5 972.7 970.8 969.0 967.2
46 1.45 1.47 978.6 976.8 975.0 973.2 971.5 969.7 967.9
47 1.48 1.50 979.1 977.3 975.6 973.8 972.0 970.3 968.5
48 1.51 1.53 979.5 977.8 976.0 974.3 972.6 970.9 969.2
49 1.54 1.56 979.9 978.2 976.5 974.8 973.2 971.5 969.8
50 1.57 1.59 980.3 978.6 977.0 975.3 973.7 972.0 970.4
51 1.60 1.62 980.6 979.0 977.4 975.8 974.2 972.6 970.9


ENGINEERING TABLE-1C (PPGI)

Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils(Plain / Corrugated)
Sl.No. Export Product Thickness Range (mm) Zinc Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      30-49 50-69 70-89 90-109 110-129 130-149 150-169
1 0.10 0.12 62.80 94.50 126.39 158.49 190.79 223.29 256.00
2 0.13 0.15 45.85 68.93 92.12 115.41 138.81 162.32 185.94
3 0.16 0.18 36.10 54.25 72.47 90.75 109.09 127.51 145.99
4 0.19 0.21 29.77 44.73 59.73 74.77 89.86 104.99 120.17
5 0.22 0.24 25.33 38.05 50.80 63.57 76.39 89.23 102.11
6 0.25 0.27 22.05 33.10 44.19 55.30 66.43 77.58 88.77
7 0.28 0.30 19.51 29.30 39.10 48.92 58.77 68.63 78.51
8 0.31 0.33 17.50 26.28 35.07 43.87 52.69 61.53 70.38
9 0.34 0.36 15.87 23.82 31.78 39.76 47.75 55.76 63.77
10 0.37 0.39 14.51 21.78 29.07 36.36 43.66 50.97 58.30
11 0.40 0.42 13.37 20.07 26.77 33.49 40.21 46.95 53.69
12 0.43 0.45 12.39 18.60 24.82 31.04 37.27 43.51 49.76
13 0.46 0.48 11.55 17.34 23.13 28.93 34.73 40.54 46.36
14 0.49 0.51 10.82 16.23 21.65 27.08 32.52 37.96 43.40
15 0.52 0.54 10.17 15.26 20.36 25.46 30.57 35.68 40.80
16 0.55 0.57 9.59 14.40 19.21 24.02 28.84 33.66 38.48
17 0.58 0.60 9.08 13.63 18.18 22.73 27.29 31.85 36.42
18 0.61 0.63 8.62 12.94 17.25 21.58 25.90 30.23 34.57
19 0.64 0.66 8.20 12.31 16.42 20.53 24.65 28.77 32.89
20 0.67 0.69 7.83 11.74 15.66 19.59 23.51 27.44 31.38
21 0.70 0.72 7.48 11.23 14.97 18.72 22.48 26.23 29.99
22 0.73 0.75 7.17 10.75 14.34 17.93 21.53 25.12 28.72
23 0.76 0.78 6.88 10.32 13.76 17.21 20.65 24.10 27.56
24 0.79 0.81 6.61 9.92 13.22 16.54 19.85 23.17 26.48
25 0.82 0.84 6.36 9.54 12.73 15.92 19.11 22.30 25.49
26 0.85 0.87 6.13 9.20 12.27 15.34 18.41 21.49 24.57
27 0.88 0.90 5.92 8.88 11.84 14.81 17.77 20.74 23.71
28 0.91 0.93 5.72 8.58 11.44 14.31 17.17 20.04 22.91
29 0.94 0.96 5.53 8.30 11.07 13.84 16.61 19.39 22.16
30 0.97 0.99 5.36 8.04 10.72 13.40 16.09 18.78 21.46
31 1.00 1.02 5.19 7.79 10.39 12.99 15.60 18.20 20.81
32 1.03 1.05 5.04 7.56 10.08 12.61 15.13 17.66 20.19
33 1.06 1.08 4.89 7.34 9.79 12.24 14.70 17.15 19.61
34 1.09 1.11 4.76 7.14 9.52 11.90 14.28 16.67 19.06
35 1.12 1.14 4.63 6.94 9.26 11.58 13.90 16.22 18.54
36 1.15 1.17 4.50 6.76 9.01 11.27 13.53 15.78 18.04
37 1.18 1.20 4.39 6.58 8.78 10.98 13.18 15.38 17.58
38 1.21 1.23 4.28 6.42 8.56 10.70 12.84 14.99 17.13
39 1.24 1.26 4.17 6.26 8.35 10.44 12.53 14.62 16.71
40 1.27 1.29 4.07 6.11 8.15 10.19 12.23 14.27 16.31
41 1.30 1.32 3.98 5.97 7.96 9.95 11.94 13.93 15.93
42 1.33 1.35 3.89 5.83 7.78 9.72 11.67 13.62 15.56
43 1.36 1.38 3.80 5.70 7.60 9.50 11.41 13.31 15.21
44 1.39 1.41 3.72 5.58 7.44 9.30 11.16 13.02 14.88
45 1.42 1.44 3.64 5.46 7.28 9.10 10.92 12.74 14.56
46 1.45 1.47 3.56 5.34 7.12 8.91 10.69 12.47 14.26
47 1.48 1.50 3.49 5.23 6.98 8.72 10.47 12.22 13.96
48 1.51 1.53 3.42 5.13 6.84 8.55 10.26 11.97 13.68
49 1.54 1.56 3.35 5.03 6.70 8.38 10.06 11.73 13.41
50 1.57 1.59 3.29 4.93 6.57 8.22 9.86 11.51 13.15
51 1.60 1.62 3.22 4.83 6.45 8.06 9.67 11.29 12.90


 

ENGINEERING TABLE-1C (PPGI)

Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/Wide Coils(Plain / Corrugated)
Sl.No. Export Product Thickness Range (mm) Zinc Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      170-189 190-209 210-229 230-249 250-269 270-289 290-309
1 0.10 0.12 288.92 322.05 355.40 388.96 422.73 456.73 490.94
2 0.13 0.15 209.67 233.51 257.45 281.51 305.69 329.97 354.37
3 0.16 0.18 164.53 183.15 201.83 220.58 239.40 258.29 277.25
4 0.19 0.21 135.39 150.66 165.97 181.33 196.74 212.19 227.69
5 0.22 0.24 115.02 127.96 140.93 153.94 166.98 180.06 193.17
6 0.25 0.27 99.97 111.20 122.46 133.74 145.05 156.38 167.73
7 0.28 0.30 88.41 98.33 108.27 118.22 128.20 138.20 148.22
8 0.31 0.33 79.24 88.12 97.02 105.94 114.86 123.81 132.77
9 0.34 0.36 71.80 79.84 87.89 95.96 104.04 112.13 120.24
10 0.37 0.39 65.63 72.98 80.34 87.70 95.08 102.47 109.87
11 0.40 0.42 60.44 67.20 73.97 80.75 87.54 94.34 101.14
12 0.43 0.45 56.01 62.28 68.55 74.82 81.11 87.40 93.70
13 0.46 0.48 52.19 58.02 63.86 69.71 75.56 81.42 87.28
14 0.49 0.51 48.85 54.31 59.77 65.24 70.72 76.20 81.69
15 0.52 0.54 45.92 51.05 56.18 61.32 66.46 71.61 76.76
16 0.55 0.57 43.32 48.15 52.99 57.84 62.69 67.54 72.40
17 0.58 0.60 40.99 45.57 50.15 54.73 59.32 63.91 68.51
18 0.61 0.63 38.91 43.25 47.59 51.94 56.29 60.65 65.01
19 0.64 0.66 37.02 41.15 45.29 49.42 53.56 57.71 61.85
20 0.67 0.69 35.31 39.25 43.19 47.14 51.09 55.04 58.99
21 0.70 0.72 33.75 37.52 41.28 45.05 48.83 52.60 56.38
22 0.73 0.75 32.32 35.93 39.54 43.15 46.76 50.37 53.99
23 0.76 0.78 31.01 34.47 37.93 41.39 44.86 48.33 51.79
24 0.79 0.81 29.80 33.13 36.45 39.78 43.11 46.44 49.77
25 0.82 0.84 28.69 31.88 35.08 38.28 41.49 44.69 47.90
26 0.85 0.87 27.65 30.73 33.81 36.90 39.98 43.07 46.16
27 0.88 0.90 26.68 29.66 32.63 35.61 38.59 41.57 44.55
28 0.91 0.93 25.78 28.66 31.53 34.41 37.28 40.16 43.04
29 0.94 0.96 24.94 27.72 30.50 33.28 36.07 38.85 41.64
30 0.97 0.99 24.15 26.84 29.54 32.23 34.92 37.62 40.32
31 1.00 1.02 23.41 26.02 28.63 31.24 33.85 36.47 39.08
32 1.03 1.05 22.72 25.25 27.78 30.31 32.85 35.38 37.92
33 1.06 1.08 22.06 24.52 26.98 29.44 31.90 34.36 36.82
34 1.09 1.11 21.44 23.83 26.22 28.61 31.00 33.39 35.79
35 1.12 1.14 20.86 23.18 25.50 27.83 30.16 32.48 34.81
36 1.15 1.17 20.30 22.56 24.83 27.09 29.35 31.62 33.88
37 1.18 1.20 19.78 21.98 24.18 26.39 28.59 30.80 33.01
38 1.21 1.23 19.28 21.43 23.57 25.72 27.87 30.02 32.17
39 1.24 1.26 18.80 20.90 22.99 25.09 27.19 29.28 31.38
40 1.27 1.29 18.35 20.40 22.44 24.49 26.53 28.58 30.63
41 1.30 1.32 17.92 19.92 21.91 23.91 25.91 27.91 29.91
42 1.33 1.35 17.51 19.46 21.41 23.36 25.32 27.27 29.22
43 1.36 1.38 17.12 19.03 20.93 22.84 24.75 26.66 28.57
44 1.39 1.41 16.74 18.61 20.47 22.34 24.21 26.07 27.94
45 1.42 1.44 16.39 18.21 20.03 21.86 23.69 25.51 27.34
46 1.45 1.47 16.04 17.83 19.61 21.40 23.19 24.98 26.77
47 1.48 1.50 15.71 17.46 19.21 20.96 22.71 24.46 26.21
48 1.51 1.53 15.40 17.11 18.82 20.54 22.25 23.97 25.69
49 1.54 1.56 15.09 16.77 18.45 20.13 21.81 23.50 25.18
50 1.57 1.59 14.80 16.45 18.09 19.74 21.39 23.04 24.69
51 1.60 1.62 14.52 16.13 17.75 19.37 20.98 22.60 24.22


ENGINEERING TABLE-1D (PPCR)

Export Product: Cold Rolled Un-galvanised Colour Coated Non Alloy Steel Sheets/ Hoops & Strips/ Wide Coils
Sl.No. Export Product Thickness Range (In mm) Paints Guard Film (Kg) Content of Substrate (CR) (kgs)
a b Primer (litre) Back Coat (litre) Top Coat (litre)
1 0.10 0.12 37.150 44.779 79.607 65.06 906.739
2 0.13 0.15 27.164 32.743 58.209 47.57 931.806
3 0.16 0.18 21.410 25.806 45.878 37.49 946.253
4 0.19 0.21 17.667 21.295 37.858 30.94 955.649
5 0.22 0.24 15.038 18.126 32.224 26.34 962.248
6 0.25 0.27 13.090 15.778 28.051 22.92 967.138
7 0.28 0.30 11.589 13.969 24.834 20.30 970.907
8 0.31 0.33 10.397 12.532 22.279 18.21 973.900
9 0.34 0.36 9.427 11.363 20.201 16.51 976.334
10 0.37 0.39 8.623 10.393 18.477 15.10 978.353
11 0.40 0.42 7.945 9.576 17.025 13.91 980.055
12 0.43 0.45 7.366 8.878 15.784 12.90 981.509
13 0.46 0.48 6.865 8.275 14.712 12.02 982.765
14 0.49 0.51 6.429 7.749 13.776 11.26 983.861
15 0.52 0.54 6.044 7.285 12.952 10.58 984.827
16 0.55 0.57 5.703 6.874 12.221 9.99 985.683
17 0.58 0.60 5.398 6.507 11.568 9.45 986.448
18 0.61 0.63 5.125 6.177 10.982 8.97 987.135
19 0.64 0.66 4.877 5.879 10.452 8.54 987.756
20 0.67 0.69 4.653 5.608 9.970 8.15 988.319
21 0.70 0.72 4.448 5.362 9.532 7.79 988.834
22 0.73 0.75 4.261 5.135 9.130 7.46 989.304
23 0.76 0.78 4.088 4.928 8.760 7.16 989.737
24 0.79 0.81 3.929 4.736 8.420 6.88 990.136
25 0.82 0.84 3.782 4.559 8.105 6.62 990.505
26 0.85 0.87 3.646 4.394 7.812 6.38 990.848
27 0.88 0.90 3.519 4.241 7.540 6.16 991.166
28 0.91 0.93 3.400 4.099 7.287 5.96 991.464
29 0.94 0.96 3.290 3.965 7.049 5.76 991.741
30 0.97 0.99 3.186 3.840 6.827 5.58 992.002
31 1.00 1.02 3.089 3.723 6.619 5.41 992.246
32 1.03 1.05 2.997 3.613 6.422 5.25 992.476
33 1.06 1.08 2.911 3.508 6.237 5.10 992.693
34 1.09 1.11 2.829 3.410 6.063 4.95 992.897
35 1.12 1.14 2.752 3.317 5.898 4.82 993.091
36 1.15 1.17 2.679 3.229 5.741 4.69 993.274
37 1.18 1.20 2.610 3.146 5.593 4.57 993.448
38 1.21 1.23 2.544 3.067 5.452 4.46 993.613
39 1.24 1.26 2.482 2.992 5.318 4.35 993.770
40 1.27 1.29 2.422 2.920 5.191 4.24 993.919
41 1.30 1.32 2.366 2.851 5.069 4.14 994.061
42 1.33 1.35 2.312 2.786 4.953 4.05 994.197
43 1.36 1.38 2.260 2.724 4.843 3.96 994.327
44 1.39 1.41 2.210 2.664 4.737 3.87 994.451
45 1.42 1.44 2.163 2.607 4.635 3.79 994.570
46 1.45 1.47 2.118 2.553 4.538 3.71 994.683
47 1.48 1.50 2.074 2.500 4.445 3.63 994.793
48 1.51 1.53 2.033 2.450 4.356 3.56 994.897
49 1.54 1.56 1.993 2.402 4.270 3.49 994.998
50 1.57 1.59 1.954 2.355 4.187 3.42 995.095
51 1.60 1.62 1.917 2.311 4.108 3.36 995.188


ENGINEERING TABLE-1E (PPGL)

Export Product: CR Zinc -Aluminium-Silicon Alloy Coated Colour Coated Non Alloy steel sheets/ strips/ wide coils (Plain / Corrugated)
Sl.No. Export Product Thickness Range (In mm) Paints Guard Film (Kg) Content of Substrate (CR Zn-Al-Si Alloy Coated Steel) (kgs)
a b Primer (litre) Back Coat(litre) Top Coat (litre)
1 0.10 0.12 47.101 56.774 100.931 82.49 881.756
2 0.13 0.15 32.128 38.725 68.845 56.26 919.346
3 0.16 0.18 24.378 29.384 52.238 42.69 938.801
4 0.19 0.21 19.640 23.674 42.086 34.40 950.695
5 0.22 0.24 16.444 19.821 35.238 28.80 958.718
6 0.25 0.27 14.143 17.048 30.307 24.77 964.495
7 0.28 0.3 12.407 14.955 26.586 21.73 968.854
8 0.31 0.33 11.050 13.320 23.679 19.35 972.259
9 0.34 0.36 9.961 12.007 21.345 17.44 974.994
10 0.37 0.39 9.067 10.929 19.430 15.88 977.237
11 0.40 0.42 8.321 10.030 17.830 14.57 979.111
12 0.43 0.45 7.688 9.267 16.474 13.46 980.700
13 0.46 0.48 7.144 8.612 15.309 12.51 982.065
14 0.49 0.51 6.673 8.043 14.299 11.69 983.249
15 0.52 0.54 6.259 7.545 13.413 10.96 984.286
16 0.55 0.57 5.894 7.105 12.631 10.32 985.203
17 0.58 0.6 5.569 6.713 11.935 9.75 986.018
18 0.61 0.63 5.279 6.363 11.311 9.24 986.749
19 0.64 0.66 5.017 6.047 10.750 8.79 987.406
20 0.67 0.69 4.779 5.761 10.241 8.37 988.002
21 0.70 0.72 4.564 5.501 9.779 7.99 988.544
22 0.73 0.75 4.366 5.263 9.356 7.65 989.039
23 0.76 0.78 4.186 5.045 8.969 7.33 989.493
24 0.79 0.81 4.019 4.844 8.612 7.04 989.911
25 0.82 0.84 3.865 4.659 8.283 6.77 990.296
26 0.85 0.87 3.723 4.487 7.978 6.52 990.654
27 0.88 0.9 3.591 4.328 7.694 6.29 990.986
28 0.91 0.93 3.467 4.180 7.430 6.07 991.295
29 0.94 0.96 3.352 4.041 7.184 5.87 991.584
30 0.97 0.99 3.245 3.911 6.953 5.68 991.854
31 1.00 1.02 3.144 3.789 6.737 5.51 992.108
32 1.03 1.05 3.049 3.675 6.534 5.34 992.346
33 1.06 1.08 2.960 3.568 6.342 5.18 992.570
34 1.09 1.11 2.876 3.466 6.162 5.04 992.781
35 1.12 1.14 2.796 3.370 5.991 4.90 992.981
36 1.15 1.17 2.721 3.279 5.830 4.76 993.170
37 1.18 1.2 2.649 3.193 5.677 4.64 993.349
38 1.21 1.23 2.582 3.112 5.532 4.52 993.519
39 1.24 1.26 2.517 3.034 5.394 4.41 993.680
40 1.27 1.29 2.456 2.961 5.263 4.30 993.834
41 1.30 1.32 2.398 2.890 5.138 4.20 993.980
42 1.33 1.35 2.342 2.823 5.019 4.10 994.120
43 1.36 1.38 2.289 2.759 4.906 4.01 994.253
44 1.39 1.41 2.239 2.698 4.797 3.92 994.380
45 1.42 1.44 2.190 2.640 4.693 3.84 994.502
46 1.45 1.47 2.144 2.584 4.593 3.75 994.619
47 1.48 1.5 2.099 2.530 4.498 3.68 994.730
48 1.51 1.53 2.056 2.479 4.407 3.60 994.838
49 1.54 1.56 2.015 2.429 4.319 3.53 994.941
50 1.57 1.59 1.976 2.382 4.234 3.46 995.040
51 1.60 1.62 1.938 2.336 4.153 3.39 995.135


ENGINEERING TABLE-1F (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)
Sl. No. Export Product Thickness (mm) CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      40-49 50-59 60-69 70-79 80-89 90-99 100-109
1 0.10 0.12 822.1 801.3 779.8 757.3 734.0 709.6 684.2
2 0.13 0.15 872.8 858.8 844.3 829.5 814.2 798.5 782.3
3 0.16 0.18 901.1 890.5 879.6 868.6 857.3 845.7 833.9
4 0.19 0.21 919.0 910.5 901.9 893.1 884.1 875.0 865.7
5 0.22 0.24 931.5 924.4 917.2 909.9 902.5 895.0 887.3
6 0.25 0.27 940.6 934.5 928.4 922.1 915.8 909.4 902.9
7 0.28 0.30 947.6 942.3 936.9 931.4 925.9 920.4 914.7
8 0.31 0.33 953.1 948.4 943.6 938.8 933.9 929.0 924.0
9 0.34 0.36 957.6 953.3 949.0 944.7 940.3 935.9 931.4
10 0.37 0.39 961.2 957.4 953.5 949.5 945.6 941.6 937.5
11 0.40 0.42 964.3 960.8 957.2 953.6 950.0 946.3 942.7
12 0.43 0.45 967.0 963.7 960.4 957.1 953.8 950.4 947.0
13 0.46 0.48 969.3 966.2 963.2 960.1 957.0 953.9 950.7
14 0.49 0.51 971.2 968.4 965.6 962.7 959.8 956.9 954.0
15 0.52 0.54 973.0 970.3 967.7 965.0 962.3 959.5 956.8
16 0.55 0.57 974.5 972.0 969.5 967.0 964.4 961.9 959.3
17 0.58 0.60 975.9 973.5 971.2 968.8 966.4 964.0 961.5
18 0.61 0.63 977.1 974.9 972.7 970.4 968.1 965.8 963.5
19 0.64 0.66 978.3 976.1 974.0 971.8 969.7 967.5 965.3
20 0.67 0.69 979.3 977.2 975.2 973.2 971.1 969.1 967.0
21 0.70 0.72 980.2 978.3 976.3 974.4 972.4 970.4 968.5
22 0.73 0.75 981.0 979.2 977.3 975.5 973.6 971.7 969.8
23 0.76 0.78 981.8 980.0 978.3 976.5 974.7 972.9 971.1
24 0.79 0.81 982.5 980.8 979.1 977.4 975.7 974.0 972.2
25 0.82 0.84 983.2 981.5 979.9 978.3 976.6 974.9 973.3
26 0.85 0.87 983.8 982.2 980.6 979.0 977.5 975.9 974.3
27 0.88 0.90 984.4 982.8 981.3 979.8 978.3 976.7 975.2
28 0.91 0.93 984.9 983.4 982.0 980.5 979.0 977.5 976.0
29 0.94 0.96 985.4 984.0 982.5 981.1 979.7 978.3 976.8
30 0.97 0.99 985.8 984.5 983.1 981.7 980.3 978.9 977.6
31 1.00 1.02 986.3 985.0 983.6 982.3 980.9 979.6 978.3
32 1.03 1.05 986.7 985.4 984.1 982.8 981.5 980.2 978.9
33 1.06 1.08 987.1 985.8 984.6 983.3 982.1 980.8 979.5
34 1.09 1.11 987.4 986.2 985.0 983.8 982.6 981.3 980.1
35 1.12 1.14 987.8 986.6 985.4 984.2 983.0 981.9 980.7
36 1.15 1.17 988.1 987.0 985.8 984.7 983.5 982.3 981.2
37 1.18 1.20 988.4 987.3 986.2 985.1 983.9 982.8 981.7
38 1.21 1.23 988.7 987.6 986.5 985.4 984.3 983.2 982.1
39 1.24 1.26 989.0 987.9 986.9 985.8 984.7 983.7 982.6
40 1.27 1.29 989.3 988.2 987.2 986.1 985.1 984.1 983.0
41 1.30 1.32 989.5 988.5 987.5 986.5 985.4 984.4 983.4
42 1.33 1.35 989.8 988.8 987.8 986.8 985.8 984.8 983.8
43 1.36 1.38 990.0 989.0 988.0 987.1 986.1 985.1 984.2
44 1.39 1.41 990.2 989.3 988.3 987.4 986.4 985.5 984.5
45 1.42 1.44 990.4 989.5 988.6 987.6 986.7 985.8 984.8
46 1.45 1.47 990.6 989.7 988.8 987.9 987.0 986.1 985.2
47 1.48 1.50 990.8 989.9 989.0 988.1 987.3 986.4 985.5
48 1.51 1.53 991.0 990.1 989.3 988.4 987.5 986.6 985.8
49 1.54 1.56 991.2 990.3 989.5 988.6 987.8 986.9 986.0
50 1.57 1.59 991.3 990.5 989.7 988.8 988.0 987.2 986.3
51 1.60 1.62 991.5 990.7 989.9 989.1 988.2 987.4 986.6


ENGINEERING TABLE-1F (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)
Sl. No. Export Product Thickness (mm) CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      110-119 120-129 130-139 140-149 150-159 160-169 170-179
1 0.10 0.12 657.7 629.9 600.9 570.5 538.7 505.3 470.1
2 0.13 0.15 765.6 748.4 730.7 712.4 693.5 674.0 653.9
3 0.16 0.18 821.8 809.5 796.8 783.8 770.6 757.0 743.0
4 0.19 0.21 856.3 846.7 836.8 826.8 816.6 806.2 795.7
5 0.22 0.24 879.6 871.7 863.7 855.6 847.3 838.9 830.4
6 0.25 0.27 896.4 889.7 883.0 876.1 869.2 862.2 855.0
7 0.28 0.30 909.1 903.3 897.5 891.6 885.6 879.5 873.4
8 0.31 0.33 919.0 913.9 908.8 903.6 898.3 893.0 887.7
9 0.34 0.36 926.9 922.4 917.8 913.2 908.5 903.8 899.0
10 0.37 0.39 933.5 929.4 925.2 921.1 916.8 912.6 908.3
11 0.40 0.42 938.9 935.2 931.4 927.6 923.8 919.9 916.0
12 0.43 0.45 943.6 940.1 936.7 933.2 929.7 926.1 922.5
13 0.46 0.48 947.6 944.4 941.2 937.9 934.7 931.4 928.1
14 0.49 0.51 951.0 948.1 945.1 942.1 939.1 936.0 933.0
15 0.52 0.54 954.0 951.3 948.5 945.7 942.9 940.0 937.2
16 0.55 0.57 956.7 954.1 951.5 948.9 946.2 943.6 940.9
17 0.58 0.60 959.1 956.7 954.2 951.7 949.2 946.7 944.2
18 0.61 0.63 961.2 958.9 956.6 954.2 951.9 949.5 947.2
19 0.64 0.66 963.2 961.0 958.8 956.5 954.3 952.1 949.8
20 0.67 0.69 964.9 962.8 960.7 958.6 956.5 954.4 952.2
21 0.70 0.72 966.5 964.5 962.5 960.5 958.5 956.4 954.4
22 0.73 0.75 967.9 966.0 964.1 962.2 960.3 958.3 956.4
23 0.76 0.78 969.3 967.4 965.6 963.8 961.9 960.1 958.2
24 0.79 0.81 970.5 968.7 967.0 965.2 963.5 961.7 959.9
25 0.82 0.84 971.6 969.9 968.2 966.6 964.9 963.2 961.4
26 0.85 0.87 972.7 971.0 969.4 967.8 966.2 964.5 962.9
27 0.88 0.90 973.6 972.1 970.5 968.9 967.4 965.8 964.2
28 0.91 0.93 974.5 973.0 971.5 970.0 968.5 967.0 965.5
29 0.94 0.96 975.4 973.9 972.5 971.0 969.5 968.1 966.6
30 0.97 0.99 976.2 974.8 973.4 971.9 970.5 969.1 967.7
31 1.00 1.02 976.9 975.5 974.2 972.8 971.5 970.1 968.7
32 1.03 1.05 977.6 976.3 975.0 973.6 972.3 971.0 969.7
33 1.06 1.08 978.3 977.0 975.7 974.4 973.1 971.8 970.5
34 1.09 1.11 978.9 977.6 976.4 975.1 973.9 972.6 971.4
35 1.12 1.14 979.5 978.3 977.0 975.8 974.6 973.4 972.2
36 1.15 1.17 980.0 978.8 977.7 976.5 975.3 974.1 972.9
37 1.18 1.20 980.5 979.4 978.3 977.1 976.0 974.8 973.7
38 1.21 1.23 981.0 979.9 978.8 977.7 976.6 975.5 974.3
39 1.24 1.26 981.5 980.4 979.3 978.3 977.2 976.1 975.0
40 1.27 1.29 982.0 980.9 979.8 978.8 977.7 976.7 975.6
41 1.30 1.32 982.4 981.4 980.3 979.3 978.3 977.2 976.2
42 1.33 1.35 982.8 981.8 980.8 979.8 978.8 977.7 976.7
43 1.36 1.38 983.2 982.2 981.2 980.2 979.2 978.3 977.3
44 1.39 1.41 983.5 982.6 981.6 980.7 979.7 978.7 977.8
45 1.42 1.44 983.9 983.0 982.0 981.1 980.1 979.2 978.3
46 1.45 1.47 984.2 983.3 982.4 981.5 980.6 979.6 978.7
47 1.48 1.50 984.6 983.7 982.8 981.9 981.0 980.1 979.2
48 1.51 1.53 984.9 984.0 983.1 982.2 981.4 980.5 979.6
49 1.54 1.56 985.2 984.3 983.5 982.6 981.7 980.9 980.0
50 1.57 1.59 985.5 984.6 983.8 982.9 982.1 981.2 980.4
51 1.60 1.62 985.8 984.9 984.1 983.3 982.4 981.6 980.8


ENGINEERING TABLE-1F (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)
Sl. No. Export Product Thickness (mm) CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      180-189 190-199 200-209 210-219 220-229 230-239
1 0.10 0.12 433.2 394.2 353.1 309.7 263.8 215.1
2 0.13 0.15 633.1 611.5 589.3 566.2 542.3 517.4
3 0.16 0.18 728.8 714.1 699.1 683.7 667.9 651.6
4 0.19 0.21 784.8 773.8 762.6 751.1 739.4 727.4
5 0.22 0.24 821.7 812.9 803.9 794.8 785.6 776.1
6 0.25 0.27 847.8 840.5 833.0 825.5 817.8 810.1
7 0.28 0.30 867.2 861.0 854.6 848.2 841.7 835.1
8 0.31 0.33 882.3 876.8 871.2 865.6 860.0 854.3
9 0.34 0.36 894.2 889.4 884.5 879.5 874.5 869.5
10 0.37 0.39 904.0 899.6 895.2 890.8 886.3 881.8
11 0.40 0.42 912.1 908.1 904.1 900.1 896.1 892.0
12 0.43 0.45 918.9 915.3 911.7 908.0 904.3 900.6
13 0.46 0.48 924.8 921.5 918.1 914.7 911.3 907.9
14 0.49 0.51 929.9 926.8 923.7 920.5 917.4 914.2
15 0.52 0.54 934.3 931.4 928.5 925.6 922.6 919.7
16 0.55 0.57 938.2 935.5 932.8 930.0 927.3 924.5
17 0.58 0.60 941.7 939.1 936.6 934.0 931.4 928.8
18 0.61 0.63 944.8 942.4 940.0 937.5 935.1 932.6
19 0.64 0.66 947.6 945.3 943.0 940.7 938.4 936.1
20 0.67 0.69 950.1 947.9 945.7 943.6 941.4 939.2
21 0.70 0.72 952.4 950.3 948.2 946.2 944.1 942.0
22 0.73 0.75 954.4 952.5 950.5 948.5 946.6 944.6
23 0.76 0.78 956.4 954.5 952.6 950.7 948.8 946.9
24 0.79 0.81 958.1 956.3 954.5 952.7 950.9 949.1
25 0.82 0.84 959.7 958.0 956.3 954.5 952.8 951.1
26 0.85 0.87 961.2 959.6 957.9 956.3 954.6 952.9
27 0.88 0.90 962.6 961.0 959.4 957.8 956.2 954.6
28 0.91 0.93 963.9 962.4 960.8 959.3 957.8 956.2
29 0.94 0.96 965.1 963.6 962.2 960.7 959.2 957.7
30 0.97 0.99 966.3 964.8 963.4 962.0 960.5 959.1
31 1.00 1.02 967.3 965.9 964.5 963.2 961.8 960.4
32 1.03 1.05 968.3 967.0 965.6 964.3 962.9 961.6
33 1.06 1.08 969.3 968.0 966.6 965.3 964.0 962.7
34 1.09 1.11 970.1 968.9 967.6 966.3 965.1 963.8
35 1.12 1.14 971.0 969.7 968.5 967.3 966.0 964.8
36 1.15 1.17 971.8 970.6 969.4 968.2 967.0 965.8
37 1.18 1.20 972.5 971.3 970.2 969.0 967.9 966.7
38 1.21 1.23 973.2 972.1 971.0 969.8 968.7 967.5
39 1.24 1.26 973.9 972.8 971.7 970.6 969.5 968.4
40 1.27 1.29 974.5 973.5 972.4 971.3 970.2 969.1
41 1.30 1.32 975.1 974.1 973.0 972.0 970.9 969.9
42 1.33 1.35 975.7 974.7 973.7 972.6 971.6 970.6
43 1.36 1.38 976.3 975.3 974.3 973.3 972.3 971.3
44 1.39 1.41 976.8 975.8 974.8 973.9 972.9 971.9
45 1.42 1.44 977.3 976.4 975.4 974.4 973.5 972.5
46 1.45 1.47 977.8 976.9 975.9 975.0 974.1 973.1
47 1.48 1.50 978.3 977.3 976.4 975.5 974.6 973.7
48 1.51 1.53 978.7 977.8 976.9 976.0 975.1 974.2
49 1.54 1.56 979.1 978.3 977.4 976.5 975.6 974.7
50 1.57 1.59 979.5 978.7 977.8 977.0 976.1 975.2
51 1.60 1.62 979.9 979.1 978.3 977.4 976.6 975.7


ENGINEERING TABLE-1G (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)
Sl. No. Export Product Thickness (mm) Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      40-49 50-59 60-69 70-79 80-89 90-99 100-109
1 0.10 0.12 76.25 95.01 114.52 134.82 155.96 177.99 200.97
2 0.13 0.15 54.50 67.54 80.94 94.72 108.90 123.50 138.53
3 0.16 0.18 42.41 52.39 62.59 73.01 83.66 94.55 105.69
4 0.19 0.21 34.71 42.79 51.02 59.39 67.92 76.60 85.44
5 0.22 0.24 29.37 36.16 43.06 50.06 57.16 64.37 71.70
6 0.25 0.27 25.46 31.31 37.25 43.26 49.35 55.52 61.77
7 0.28 0.30 22.46 27.61 32.82 38.08 43.41 48.80 54.25
8 0.31 0.33 20.10 24.69 29.33 34.02 38.75 43.53 48.37
9 0.34 0.36 18.19 22.33 26.51 30.73 34.99 39.29 43.63
10 0.37 0.39 16.61 20.38 24.19 28.03 31.90 35.81 39.74
11 0.40 0.42 15.28 18.75 22.24 25.76 29.31 32.89 36.49
12 0.43 0.45 14.15 17.35 20.58 23.83 27.11 30.41 33.73
13 0.46 0.48 13.17 16.15 19.15 22.17 25.21 28.28 31.36
14 0.49 0.51 12.32 15.11 17.91 20.73 23.57 26.42 29.30
15 0.52 0.54 11.58 14.19 16.82 19.46 22.12 24.80 27.49
16 0.55 0.57 10.92 13.38 15.85 18.34 20.85 23.36 25.89
17 0.58 0.60 10.33 12.65 14.99 17.34 19.71 22.08 24.47
18 0.61 0.63 9.80 12.00 14.22 16.45 18.69 20.94 23.20
19 0.64 0.66 9.32 11.42 13.52 15.64 17.77 19.90 22.05
20 0.67 0.69 8.89 10.88 12.89 14.91 16.93 18.97 21.01
21 0.70 0.72 8.49 10.40 12.32 14.24 16.17 18.12 20.07
22 0.73 0.75 8.13 9.96 11.79 13.63 15.48 17.34 19.20
23 0.76 0.78 7.80 9.55 11.31 13.07 14.84 16.62 18.41
24 0.79 0.81 7.49 9.17 10.86 12.56 14.26 15.97 17.68
25 0.82 0.84 7.21 8.83 10.45 12.08 13.72 15.36 17.01
26 0.85 0.87 6.95 8.51 10.07 11.64 13.21 14.79 16.38
27 0.88 0.90 6.70 8.21 9.72 11.23 12.75 14.27 15.80
28 0.91 0.93 6.48 7.93 9.38 10.85 12.31 13.78 15.26
29 0.94 0.96 6.26 7.67 9.08 10.49 11.91 13.33 14.75
30 0.97 0.99 6.06 7.42 8.79 10.15 11.53 12.90 14.28
31 1.00 1.02 5.88 7.20 8.52 9.84 11.17 12.50 13.84
32 1.03 1.05 5.70 6.98 8.26 9.55 10.83 12.13 13.42
33 1.06 1.08 5.54 6.78 8.02 9.27 10.52 11.77 13.03
34 1.09 1.11 5.38 6.59 7.79 9.01 10.22 11.44 12.66
35 1.12 1.14 5.23 6.41 7.58 8.76 9.94 11.12 12.31
36 1.15 1.17 5.09 6.23 7.38 8.52 9.67 10.82 11.98
37 1.18 1.20 4.96 6.07 7.19 8.30 9.42 10.54 11.67
38 1.21 1.23 4.84 5.92 7.00 8.09 9.18 10.27 11.37
39 1.24 1.26 4.72 5.77 6.83 7.89 8.95 10.02 11.09
40 1.27 1.29 4.60 5.63 6.67 7.70 8.74 9.78 10.82
41 1.30 1.32 4.50 5.50 6.51 7.52 8.53 9.54 10.56
42 1.33 1.35 4.39 5.37 6.36 7.34 8.33 9.32 10.32
43 1.36 1.38 4.29 5.25 6.21 7.18 8.14 9.11 10.08
44 1.39 1.41 4.20 5.14 6.08 7.02 7.97 8.91 9.86
45 1.42 1.44 4.11 5.03 5.95 6.87 7.79 8.72 9.65
46 1.45 1.47 4.02 4.92 5.82 6.72 7.63 8.53 9.44
47 1.48 1.50 3.94 4.82 5.70 6.59 7.47 8.36 9.25
48 1.51 1.53 3.86 4.72 5.59 6.45 7.32 8.19 9.06
49 1.54 1.56 3.78 4.63 5.48 6.32 7.17 8.03 8.88
50 1.57 1.59 3.71 4.54 5.37 6.20 7.03 7.87 8.71
51 1.60 1.62 3.64 4.45 5.27 6.08 6.90 7.72 8.54


ENGINEERING TABLE-1G (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)
Sl. No. Export Product Thickness (mm) Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      110-119 120-129 130-139 140-149 150-159 160-169 170-179
1 0.10 0.12 224.97 250.05 276.28 303.76 332.57 362.81 394.58
2 0.13 0.15 154.01 169.97 186.43 203.41 220.93 239.03 257.73
3 0.16 0.18 117.09 128.75 140.68 152.90 165.41 178.23 191.36
4 0.19 0.21 94.44 103.61 112.96 122.48 132.19 142.08 152.17
5 0.22 0.24 79.14 86.69 94.36 102.16 110.08 118.13 126.31
6 0.25 0.27 68.10 74.52 81.03 87.62 94.31 101.09 107.96
7 0.28 0.30 59.77 65.35 70.99 76.71 82.49 88.34 94.26
8 0.31 0.33 53.25 58.18 63.17 68.21 73.30 78.45 83.65
9 0.34 0.36 48.01 52.43 56.90 61.41 65.96 70.55 75.19
10 0.37 0.39 43.71 47.72 51.76 55.84 59.95 64.10 68.28
11 0.40 0.42 40.12 43.78 47.47 51.19 54.94 58.72 62.53
12 0.43 0.45 37.08 40.45 43.84 47.26 50.71 54.18 57.68
13 0.46 0.48 34.46 37.58 40.73 43.89 47.08 50.29 53.52
14 0.49 0.51 32.19 35.10 38.03 40.97 43.94 46.92 49.93
15 0.52 0.54 30.20 32.92 35.66 38.42 41.19 43.98 46.79
16 0.55 0.57 28.44 31.00 33.57 36.16 38.76 41.38 44.01
17 0.58 0.60 26.87 29.29 31.72 34.16 36.61 39.07 41.55
18 0.61 0.63 25.47 27.76 30.05 32.36 34.68 37.01 39.35
19 0.64 0.66 24.21 26.38 28.56 30.74 32.94 35.15 37.37
20 0.67 0.69 23.07 25.13 27.20 29.28 31.37 33.47 35.58
21 0.70 0.72 22.03 23.99 25.97 27.95 29.95 31.95 33.96
22 0.73 0.75 21.08 22.96 24.84 26.74 28.64 30.55 32.47
23 0.76 0.78 20.20 22.00 23.81 25.63 27.45 29.28 31.11
24 0.79 0.81 19.40 21.13 22.86 24.60 26.35 28.10 29.86
25 0.82 0.84 18.66 20.32 21.98 23.66 25.33 27.02 28.71
26 0.85 0.87 17.97 19.57 21.17 22.78 24.40 26.02 27.64
27 0.88 0.90 17.33 18.87 20.42 21.97 23.52 25.08 26.65
28 0.91 0.93 16.74 18.23 19.72 21.21 22.71 24.22 25.73
29 0.94 0.96 16.19 17.62 19.06 20.51 21.95 23.41 24.87
30 0.97 0.99 15.67 17.05 18.45 19.84 21.25 22.65 24.06
31 1.00 1.02 15.18 16.52 17.87 19.22 20.58 21.94 23.31
32 1.03 1.05 14.72 16.02 17.33 18.64 19.96 21.28 22.60
33 1.06 1.08 14.29 15.56 16.82 18.09 19.37 20.65 21.93
34 1.09 1.11 13.88 15.11 16.34 17.58 18.82 20.06 21.30
35 1.12 1.14 13.50 14.69 15.89 17.09 18.29 19.50 20.71
36 1.15 1.17 13.14 14.30 15.46 16.63 17.80 18.97 20.15
37 1.18 1.20 12.79 13.92 15.06 16.19 17.33 18.47 19.62
38 1.21 1.23 12.47 13.57 14.67 15.78 16.89 18.00 19.11
39 1.24 1.26 12.16 13.23 14.30 15.38 16.46 17.55 18.63
40 1.27 1.29 11.86 12.91 13.96 15.01 16.06 17.12 18.18
41 1.30 1.32 11.58 12.60 13.62 14.65 15.68 16.71 17.74
42 1.33 1.35 11.31 12.31 13.31 14.31 15.31 16.32 17.33
43 1.36 1.38 11.06 12.03 13.01 13.98 14.97 15.95 16.93
44 1.39 1.41 10.81 11.76 12.72 13.67 14.63 15.59 16.56
45 1.42 1.44 10.58 11.51 12.44 13.38 14.31 15.25 16.20
46 1.45 1.47 10.35 11.26 12.18 13.09 14.01 14.93 15.85
47 1.48 1.50 10.14 11.03 11.92 12.82 13.72 14.62 15.52
48 1.51 1.53 9.93 10.81 11.68 12.56 13.44 14.32 15.20
49 1.54 1.56 9.73 10.59 11.45 12.31 13.17 14.03 14.90
50 1.57 1.59 9.54 10.38 11.22 12.07 12.91 13.76 14.60
51 1.60 1.62 9.36 10.18 11.01 11.83 12.66 13.49 14.32


ENGINEERING TABLE-1G (PPGL)

Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated)
Sl. No. Export Product Thickness (mm) Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m2
a b
      180-189 190-199 200-209 210-219 220-229 230-239
1 0.10 0.12 428.01 463.24 500.40 539.67 581.23 625.28
2 0.13 0.15 277.06 297.05 317.75 339.17 361.38 384.41
3 0.16 0.18 204.82 218.62 232.78 247.30 262.20 277.50
4 0.19 0.21 162.46 172.96 183.66 194.59 205.74 217.12
5 0.22 0.24 134.62 143.07 151.66 160.40 169.29 178.32
6 0.25 0.27 114.93 121.99 129.16 136.43 143.81 151.29
7 0.28 0.30 100.26 106.33 112.47 118.69 124.99 131.37
8 0.31 0.33 88.91 94.23 99.60 105.04 110.53 116.09
9 0.34 0.36 79.87 84.60 89.38 94.20 99.07 103.99
10 0.37 0.39 72.50 76.76 81.05 85.39 89.76 94.18
11 0.40 0.42 66.37 70.25 74.15 78.09 82.05 86.05
12 0.43 0.45 61.20 64.75 68.33 71.93 75.56 79.22
13 0.46 0.48 56.78 60.06 63.36 66.68 70.03 73.40
14 0.49 0.51 52.95 56.00 59.06 62.14 65.24 68.37
15 0.52 0.54 49.61 52.45 55.31 58.18 61.07 63.98
16 0.55 0.57 46.66 49.32 52.00 54.69 57.40 60.13
17 0.58 0.60 44.05 46.55 49.07 51.60 54.15 56.71
18 0.61 0.63 41.71 44.07 46.45 48.84 51.25 53.66
19 0.64 0.66 39.60 41.85 44.10 46.36 48.64 50.92
20 0.67 0.69 37.70 39.83 41.97 44.12 46.28 48.45
21 0.70 0.72 35.98 38.00 40.04 42.09 44.14 46.21
22 0.73 0.75 34.40 36.34 38.28 40.23 42.19 44.16
23 0.76 0.78 32.96 34.81 36.67 38.53 40.41 42.29
24 0.79 0.81 31.63 33.40 35.19 36.97 38.77 40.57
25 0.82 0.84 30.41 32.11 33.82 35.53 37.26 38.99
26 0.85 0.87 29.27 30.91 32.55 34.20 35.86 37.52
27 0.88 0.90 28.22 29.80 31.38 32.97 34.56 36.16
28 0.91 0.93 27.24 28.76 30.29 31.82 33.36 34.90
29 0.94 0.96 26.33 27.80 29.27 30.75 32.23 33.72
30 0.97 0.99 25.48 26.89 28.32 29.75 31.18 32.61
31 1.00 1.02 24.68 26.05 27.43 28.81 30.19 31.58
32 1.03 1.05 23.92 25.25 26.59 27.93 29.27 30.61
33 1.06 1.08 23.22 24.51 25.80 27.10 28.40 29.70
34 1.09 1.11 22.55 23.80 25.06 26.32 27.58 28.84
35 1.12 1.14 21.92 23.14 24.36 25.58 26.80 28.03
36 1.15 1.17 21.33 22.51 23.69 24.88 26.07 27.27
37 1.18 1.20 20.76 21.91 23.07 24.22 25.38 26.54
38 1.21 1.23 20.23 21.35 22.47 23.60 24.72 25.85
39 1.24 1.26 19.72 20.81 21.90 23.00 24.10 25.20
40 1.27 1.29 19.24 20.30 21.37 22.44 23.51 24.58
41 1.30 1.32 18.78 19.82 20.86 21.90 22.94 23.99
42 1.33 1.35 18.34 19.35 20.37 21.38 22.40 23.43
43 1.36 1.38 17.92 18.91 19.90 20.90 21.89 22.89
44 1.39 1.41 17.52 18.49 19.46 20.43 21.40 22.38
45 1.42 1.44 17.14 18.08 19.03 19.98 20.93 21.89
46 1.45 1.47 16.77 17.70 18.62 19.55 20.48 21.42
47 1.48 1.50 16.42 17.33 18.23 19.14 20.05 20.97
48 1.51 1.53 16.09 16.97 17.86 18.75 19.64 20.53
49 1.54 1.56 15.76 16.63 17.50 18.37 19.25 20.12
50 1.57 1.59 15.45 16.30 17.16 18.01 18.87 19.72
51 1.60 1.62 15.15 15.99 16.82 17.66 18.50 19.34


Presented by eximkey.com

 

Trade Intelligence
Search for latest information on item wise exports and imports, from all major Indian ports.

Username
Password
Register now Free ? Forgot Password ?
© Copyright 2022. Asis Industries Ltd . All Rights Reserved