PUBLIC NOTICE NO. 15(RE-2001)/1997-2002, DATED : 01/06/2001.
Amendments in Standard Input Output Norms
Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
- In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
- In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
- In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl.No.A-2668, the new entries from Sl.No.A-2669 to A-2686 shall be added as per Annexure ”B” to this Public Notice.
ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1656, the new entries from Sl.No.C-1657 to C-1667 shall be added as per Annexure ”C” to this Public Notice.
FOOD PRODUCTS
After the existing entry at Sl.No.E-102, the new entry at Sl. No. E-103 shall be added as per Annexure ”D” to this Public Notice.
PLASTIC PRODUCTS
After the existing entry at Sl.No.H-437, the new entries at Sl. No. H-438 to 440 shall be added as per Annexure ”E” to this Public Notice.
- This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(H. C. AZAD)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No. 15
Dated: 01/06/2001
AMENDMENTS/CORRECTIONS
| Sl. No. | Page No. | Reference | Amendments/Corrections |
| 1 | 2 | 3 | 4 |
| 1. | 5 | GENERAL NOTE OF CHEMICALS & ALLIED PRODUCTS | In the general notes, note No. 10 shall be amended to read as under:-
"10. In case of paper, a variation of +/- 10% in GSM of paper in import and export will be allowed, except in case of SION at Sl. No. A-1569 and A-1579 where flexibility for import of relevant paper within the range of GSM 50 to GSM 150 will be allowed”. |
| 2. | 42 | Chemicals & Allied Products
Sl.No.A219 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A219 | Erythromycin Ethyl Succinate BP/USP | 1 kg | 1. Erythromycin Thiocyanate | 0.91 kg activity/kg |
| OR | |
| 1. Erythromycin Base BP | 0.87 kg/kg |
| 2. 3-Ethoxy Carbonyl Propionyl Chloride | 0.40 kg/kg |
| 3. | 43 | Chemicals & Allied ProductsSl.No.A228 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A228 | Ethopabate BP (Vet)’93 | 1 kg | 1. Meta Amino Phenol | 1.08 kg |
| 2. Potassium Carbonate | 2.15 kg |
| 3. Diethyl Sulphate | 0.85 kg |
| 4. Methyl Isobutyl Ketone | 0.875 kg |
| 4. | 54 | Chemicals & Allied Products
Sl.No.A321 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A321 | Omeprazole | 1 kg | 1. 3,5 Lutidine | 2.72 kg |
| OR | |
| 1. 2,3,5 Trimethyl Pyridine | 3.08 kg |
| 2. Methylene Chloride | 9.60 kg |
| 3. Methanol | 5.08 kg |
| 4. Acetone | 2.54 kg |
| 5. 2-Mercapto-5- Methoxy Benzimidazole | 1.05 kg |
| 6. Meta Chloro Perbenzoic Acid | 1.11 kg |
| 5. | 54 | Chemicals & Allied Products
Sl.No.A323 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A323 | Omeprazole Pellets 8.5% | 1 kg | 1. 3,5 Lutidine | 0.232 kg |
| OR | |
| 1. 2,3,5 Trimethyl Pyridine | 0.262 kg |
| 2. Methylene Chloride | 0.816 kg |
| 3. Methanol | 0.43 kg |
| 4. Acetone | 0.21 kg |
| 5. 2-mercapto-5- Methoxy Benzimidazole | 0.08 kg |
| 6. Meta Chloro Perbenzoic Acid | 0.09 kg |
| 7. Hydroxy Propyl Methyl Chloride Cellulose | 0.05 kg |
| 8. Methocrylic Acid Copolymer | 0.114 kg |
| OR | |
| 8. Polyvinyl Pyrollidone | 0.114 kg |
| 6. | 62 | Chemicals & Allied Products
Sl.No.A391 | The norm covered by this entry shall be deleted. |
| 7. | 149 | Chemicals & Allied Products
Sl.No.A1082 | The description of export item shall be amended to read as under:-
“Stable Bleaching Powder Chlorine Content upto 36%”. |
| 8. | 169 | Chemicals & Allied Products
Sl.No.A1360 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1360 | Hexamethyl Disilazane | 1 kg | 1. (a) Hexa Methyl Disilazane | 1.49 kg |
| 1. (b) Dimethyl Dichloro Silane | 1.309 kg |
| OR | |
| 1. (a) Trimethyl Chlorosilane (TMCS) | 1.50 kg |
| 1.(b) Toluene | 0.10 kg |
| 1.(c) Ammonia Gas | 0.35 kg |
| 9. | 4 | Chemicals & Allied Products
Sl.No.A1778 (vide Public Notice No. 59 Dated: 01.03.2001 | 1. The description of export item shall be amended to read as under:-
“Compatible Black Toner for Photo Copiers (other than Xerox 1025)”.
2. In the quantity of import item at Sl. No. 7 shall be amended to read as under:-
“6.10 kgs instead of 2.10 kgs”. |
| 10. | 264 | Chemicals & Allied Products
Sl.No.A1975 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1975 | Chlorohexan-2-One | 1 kg | 1. 1-bromo-3-Chloro propane | 2.05 kg |
| OR | |
| 1. (i) Allyl Chloride | 1.43 kg |
| 1. (ii) Hydro Bromic Acid 48% | 3.16 kg |
| 2. Methyl/Ethyl Aceto Acetate | 1.65 kg |
| 3. Iso Propyl Alcohol | 0.45 kg |
| 4. Potassium Carbonate | 4.24 kg |
| 11. | 270 | Chemicals & Allied Products
Sl.No.A2022 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2022 | Methyl 4 Acetamide-5 Chloro 2 Methoxy Benzoate (Chloro-methopabate) | 1 kg | 1. Meta Amino Phenol | 1.30 kg |
| 2. Potassium Carbonate | 2.47 kg |
| 3. Caustic Soda Lye(47%) | 0.82 kg |
| 12. | 283 | Chemicals & Allied Products
Sl.No.A2116 | Quantity of import items at Sl. Nos. 1 & 2 shall be amended to read as under:-
“1. 840.0 kgs instead of 800 kgs
2. 210.0 kgs instead of 200 kgs”. |
| 13. | 315 | Chemicals & Allied Products
Sl.No.A2357 | The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-
“1. Cobalt Metal forms – Broken Cathodes/ Briquettes/ Granules/ Powder containing 98.5% Cobalt content”. |
| 14. | 315 | Chemicals & Allied Products
Sl.No.A2358 | The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-
"1. Cobalt Metal forms – Broken Cathodes/ Briquettes/ Granules/ Powder containing 98.5% Cobalt content”. |
| 15. | 317 | Chemicals & Allied Products
Sl.No.A2369 | The norm covered by this entry shall be deleted. |
| 16. | 320-321 | Chemicals & Allied Products
Sl.No.A2386 | The norm covered by this entry shall be deleted. |
| 17. | 40 | Chemicals & Allied Products
Sl.No.A2609 (Vide Public Notice No. 04 Dated. 31.03.2001) | The description of the export item shall be amended to read as under:-
“Ferric Ammonium Citrate B.P.73” |
| 18. | 41 | Chemicals & Allied Products
Sl.No.A2615 (Vide Public Notice No. 04 Dated: 31.03.2001) | The description of export item shall be amended to read as under:-
“PQ Carbonate/Cis PQ Carbonate” |
| 19. | 42 | Chemicals & Allied Products
Sl.No.A2617 (Vide Public Notice No. 04 Dated: 31.03.2001) | The norm covered by this entry shall be deleted. |
| 20. | 49 | Chemicals & Allied Products
Sl.No.A2664 (Vide Public Notice No. 04 Dated: 31.03.2001) | The norm covered by this entry shall be deleted. |
| 21. | 49 | Chemicals & Allied Products
Sl.No.A2665 (Vide Public Notice No. 04 Dated: 31.03.2001) | The norm covered by this entry shall be deleted. |
| 22. | 327-329 | Electronics Products
Sl. No. B-7 (Introduced vide Public Notice No. 53 Dated: 1.2.2001) | The description of import item at Sl. No. 9(a) (without any change in quantity) shall be amended to read as under:-
9(a). “Electrogalvanised CRCA Steel Sheet/ Strip” |
| 23. | 436 | Engineering Product
Sl.No.C160 | The description of export item shall be amended to read as under:-
“Electrical Wiring Accessories/Components wholly made of Brass”. |
| 24. | 15 | Engineering Product
Sl.No.C465 (vide Public Notice No.04 Dated: 31.03.2001) | After the description of import item at Sl. No. 1 the word “And/” shall be added before the word “OR”.
“And/OR” |
| 25. | 539 | Engineering Product
Sl.No.C496 | The description of import item at Sl. No. 2 shall be amended to read as under:- |
| “2. Low Ash Metallurgical Coke (with Ash content below 15%) | 700 kgs |
| OR | |
| 2. Coking Coal (with Ash Content below 12%) | 1000 kgs”. |
| 26. | 693 | Engineering Product
Sl.No.C1178 | At the end of the description of export item the words “KS940” shall be added as follows:-
“Copper Based Pre-allowed Powders to R-100/PMB-20/SY/HF2/LS10/GS10/SAE-797/G-46/KS940”. |
| 27. | 693 | Engineering Product
Sl.No.C1179 | At the end of the description of export item the words “KS941-1” shall be added as follows:-
“Copper Based Pre-allowed Powders to R-250/PMB-21/SX/H-24/KS-25/GS-25/SAE-799/HF-16/KS-23/GS-23/G-48/KS941-1”. |
| 28. | 733 | Engineering Product
Sl.No.C1389 | In the quantity of import item at Sl. No. 3 shall be amended to read as under:-
“1.75 MT/MT content in the export product”. |
| 29. | 28 | Engineering Product
Sl.No.C1575 (Vide Public Notice No. 42 Dated: 1.12.2000) | The norm covered by this entry shall be deleted. |
| 30. | 63 | Engineering Product
Sl.No.C1627 (Vide Public Notice No. 04 Dated: 31.03.2001) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1627 | Copper based Alloy Ingots of different grade | 1 kg. | 1. Copper Scrap | 1.06 kg/kg content in the export product |
| OR | |
| 1. Copper wire bar/Cathode | 1.02 kg/kg content in the export product |
| 2. Tin Ingots | 1.02 kg/kg content in the export product |
| 3. Nickel shots/ Pellets | 1.02 kg/kg content in the export product |
| 4. Lead Scrap | 1.06 kg/kg content in the export product |
| OR | |
| 4. Lead Ingots | 1.02 kg/kg content in the export product |
| 5. Zinc Scrap | 1.06 kg/kg content in the export product |
| OR | |
| 5. Zinc Ingot | 1.02 kg/kg content in the export product |
| 6. Aluminium Scrap | 1.06 kg/kg content in the export product |
| OR | |
| 6. Aluminium Ingot | 1.02 kg/kg content in the export product |
| 7. Manganese (Elemental form) | 1.02 kg/kg content in the export product |
| 8. Phosphor Copper | 0.01 kg |
| 31. | 71 | Engineering Product
Sl.No.C1650 (Vide Public Notice No. 04 Dated: 31.03.2001) | The description of import item at Sl. No. 5 (without any change in quantity) shall be amended to read as under:-
“5. Non Alloy Steel Rods/Bars” |
| 32. | 830-831 | Leather Product
Sl.No.G-18 | In the foot note at Sl. No. 1(b) below this norm shall be amended to read as under:-
“1(b). Synthetic foam lining/laminated fleece lining/synthetic lining made of 100% polyester to the extent of 0.035 sq.mtr.”. |
| 33. | 92 | Sports Goods
Sl.No.I-30 (As amended vide Public Notice No. 04 dt.31.03.2001) | 1. The description of export item shall be amended to read as under:-
“Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-5 having Rubber compound 160 gms +/-5%”.
2. The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
“50 gms” |
| 34. | 92-93 | Sports Goods
Sl.No.I-31 (As amended vide Public Notice No. 04 dt.31.03.2001) | 1. The description of export item shall be amended to read as under:-
“Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-4 having Rubber compound 130 gms +/- 5%”.
2. The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
“40 gms” |
| 35. | 93 | Sports Goods
Sl.No.I-32 (As amended vide Public Notice No. 04 dt.31.03.2001) | 1. The description of export item shall be amended to read as under:-
“Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-3 having Rubber compound 105 gms +/- 5%”.
2. The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
“27 gms” |
| 36. | 93-94 | Sports Goods
Sl.No.I-33 (As amended vide Public Notice No. 04 dt.31.03.2001) | 1. The description of export item shall be amended to read as under:-
“Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ PolyesterFabric fitted with Butyl Bladder or Latex Bladder size-2 having Rubber compound 80 gms +/- 5%”.
2. The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
“18 gms” |
| 37. | 94 | Sports Goods
Sl.No.I-34 (As amended vide Public Notice No. 04 dt.31.03.2001) | 1. The description of export item shall be amended to read as under:-
“Football/ Rugbyball/ Soccer ball/ Net Ball/ Volley Ball made out of synthetic Rubber Nitrile/SBR supported with relevant layers of cotton fabric and or polyester viscose Fabric/ Polyester Fabric fitted with Butyl Bladder or Latex Bladder size-1 having Rubber compound 60 gms +/- 5%”.
2. The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
“13 gms” |
| 38. | 954 | GENERAL NOTE OF TEXTILE PRODUT GROUP | “In the general notes, note No. 13 shall be deleted”. |
Annexure “B” to the
Public Notice No. 15
Dated: 01/06/2001
CHEMICALS AND ALLIED PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A2669 | Calcium Hypochlorite Chlorine content more than 60% | 1 kg | 1. High Purity Hydrated Lime 95% | 0.744 kg |
| 2. Caustic Soda Lye | 0.625 kg |
| A2670 | Gold Potassium Cyanide-Purity 99.60% minimum (containing minimum 68.1% of Gold as metal) | 1 kg | 1. Gold | 0.681 kg |
| 2. Potassium Cyanide | 0.452 kg |
| (SL.NO. A-2670 has been treated as withdrawn vide P.N. No. 16(RE-01)) |
| A2671 | Silicone Treatment Compound (Vinyl Methoxy Polysiloxane) | 1 kg | 1. Volatile Cyclic Mixture (Average Siloxane content 95%) | 1.2 kg |
| A2672 | Polyacetal Resin Compound | 1 MT | 1. Polyacetal resin (fluff) | 1021.54 kg |
| 2. Polacrylamide | 6.54 kg |
| 3. Eva Co-polymer | 1.56 kg |
| 4. Polyethylene Glycol | 9.05 kg |
| 5. Antioxident (Irganox) | 1.04 kg |
| 6. Artificial wax | 0.25 kg |
| A2673 | Sodium Polyt Acrylate Solution (containing 40+/-2% Sodium Polyacrylate) | 1 MT | 1. Acrylic Acid | 0.266 MT |
| A2674 | Pentoxazone: 3-(4-Chloro-5- Cyclopentyloxy-2- Fluorophenyl) – 5- Isopropylidene- oxazolidine-2, 4-Dione (KPP-314) | 1 kg | 1. Ethyl N-(4-Chloro 5-Cyclopentyloxy- 2-Fluoro Phenyl) Carbamant (KPI) | 1.200 kg |
| 2. Ethyl 2-Hydroxy-3- Methyl-3-Butenoate (ECG)(82% Purity) | 1.170 kg |
| OR | |
| 1. Para Fluoro Phenol | 0.683 kg |
| OR | |
| 1. Para Fluoro Aniline | 0.915 kg |
| OR | |
| 1. Para Fluoro Nitro Benzene | 1.290 kg |
| 2. Cyclopentyl Bromide (98% Purity) | 1.585 kg |
| 3. Sodium Metal | 0.588 kg |
| 4. Ethyl Chloro Acetate | 1.434 kgs |
| 5. Ethyl Chloro Formate | 1.625 kg |
| 6. Dichloro Ethane | 0.582 kg |
| 7. Toluene | 4.300 kgs |
| 8. Acetone | 1.488 kg |
| 9. Tetra Butyl Ammonium Bromide | 0.110 kg |
| 10. Tributyl Amine | 0.082 kg |
| 11. Raney Nickel Catalyst | 0.030 kg |
| A2675 | Aceto Acetanilide | 1 kg | 1. Acetic Acid | 1.012 kg |
| 2. Tri Ethyl Phosphate | 0.008 kg |
| 3. DABCO crystalline (1,4 Diazobicyelo (2,2, 2)-Octane | 0.0003 kg |
| 4. Aniline | 0.550 kg |
| A2676 | Aceto Acet Ortho Ansidide | 1 kg | 1. Acetic Acid | 0.996 kg |
| 2. Tri Ethyl Phosphate | 0.0066 kg |
| 3. DABCO crystalline (1,4 Diazobicyclo (2,2, 2)- Octane | 0.0005 kg |
| 4. Artho Anisidine | 0.742 kg |
| A2677 | Aceto Acet Ortho Chloro Anilide | kg | 1. Acetic Acid | 0.946 kg |
| 2. Tri Ethyl Phosphate | 0.0065 kg |
| 3. DABCO crystalline (1,4 Diazobicyclo (2,2, 2)- Octane | 0.0005 kg |
| 4. Ortho chloro Aniline | 0.754 kg |
| A2678 | Aceto Acet Meta Xylidide Ansidide | 1 kg | 1. Acetic Acid | 0.874 kg |
| 2. Tri Ethyl Phosphate | 0.007 kg |
| 3. DABCO crystalline (1,4 Diazobicyclo (2,2, 2)- Octane | 0.0005 kg |
| 4. 2,4 xylidide | 0.672 kg |
| A2679 | Aceto Acet Ortho Toluidide | 1 kg | 1. Acetic Acid | 1.047 kg |
| 2. Ortho toludine | 0.700 kg |
| 3. Try Ethyl Phosphate | 0.007 kg |
| 4. DABCO crystalline (1,4 Diazobicyclo (2,2,2)- Octane | 0.0005 kg |
| A2680 | -Aceto Acet-4-Chloro 2,5 Dimethoxy Anilide (Naphthol AS – IRG)- | 1 kg | 1. Acetic Acid | 0.982 kg |
| 2. Tri Ethyl Phosphate | 0.0057 kg |
| 3. DABCO crystalline (1,4 Diazobicyclo (2,2, 2)- Octane | 0.00051 kg |
| 4. 2,5 Dimethoxy-4- Chloro Aniline | 0.896 kg |
| A2681 | Ethyl Aceto Acetate | 1 kg | 1. Acetic Acid | 1.578 kg |
| 2. Tri Ethyl Phosphate | 0.0057 kg |
| 3. DABCO crystalline (1,4 Diazobicyclo (2,2, 2)-Octane | 0.0004 kg |
| A2682 | Sodium Amino Salicylate BP (PAS Sodium) | 1 kg | 1. Meta Amino Phenol | 0.88 kg |
| 2. Potassium Carbonate | 0.98 kg |
| 3. Caustic Soda Lye(47%) | 0.56 kg |
| A2683 | Magnesium Perchlorate Hexahydrate | 1 kg | 1. Sodium Chloride | 0.714 kg |
| A2684 | 2-Chloromethyl-3, 5-Dimethyl-4-Methoxy Pyridine Hydrochloride | 1 kg | 1. 3,5 Lutidine | 2.22 kg |
| OR | |
| 1. 2,3,5 Trimethyl Pyridine | 2.51 kg |
| 2. Methylene Chloride | 7.83 kg |
| 3. Methanol | 4.14 kg |
| 4. Acetone | 2.07 kg |
| 5. Activated Carbon | 0.100 kg |
| A2685 | Stannous Sulphate | 1 kg | 1. Tin Metal | 0.582 kg |
| A2686 | Dimethyl Amine Hydrochloride | 1 kg | 1. Methanol | 0.872 kg |
Annexure “C” to the
Public Notice No. 15
Dated: 01/06/2001
ENGINEERING PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
| C1657 | Modular Enclosures for Electronics Rack/ Subrack Cabinet | 1 No. | 1. Relevant Modular Locks | Net to net |
| 2. Relevant Slides | Net to net |
| 3. Relevant Keyboard, Tray, Screws, Nut and Bolt | Net to net |
| 4. Hardware | 500 gms |
| 5. Paints | cif value restricted to 2% of the fob value |
| 6. Plastics | -do- |
| 7. Powder | -do- |
| 8. Fan | Net to net |
| 9. Castores | Net to net |
| 10. Electric Switch | Net to net |
| C1658 | Valve Seat Insert made of Alloy Steel of following Composition:
- Chromium : 2, 4-4.8%
- Molybdenum : 0.36-0.72%
- Tungston : 0.5%
- Nickel : 1.5-4.5%
- Cobalt : 1.6%
- Boron : 0.3%
- Iron and carbon : Balance
| 100 kg | 1. Chromium Metal | 3.86 kg |
| OR | |
| 1. High Carbon ferro Chrome (Chromium Content of 52-60%) | 7.02 kg |
| OR | |
| 1. Low Carbon ferro Chrome (Chromium Content of 65-70%) | 5.67 kg |
| 2. Ferro Molybdenum (Molybdenum content of 60-70%) | 0.85 kg |
| 3. Ferro Tungston (with Tungston content of 75%) | 0.67 kg |
| 4. Nickel pellets/shots | 3.06 kg |
| 5. Cobalt | 1.6 kg |
| 6. Boron | 0.3 kg |
| 7. Melting scrap of mild steel | 86.8 kg |
| C1659 | Molybdenum Fine Wire (below 0.5 mm Dia) | 1 kg | 1. Molybdenum Wire (above 0.8 mm Dia) | 1.08 kg |
| C1660 | Ratchet Wheel Plates | 1 kg | 1. SS Sheets/Coils made of AISI 304 Grade (HR) | 1.50 kg |
| C1661 | Oil Pressure Switch for Motor vehicle other than heavy commercial vehicle | 1 No. | 1. Spring | 1 No. |
| 2. Body | 1 No. |
| 3. Diaphragm | 1 No. |
| 4. Rivet contact | 1 No. |
| Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any, etc., of the components sought for import should conform to those utilised in the manufacture of the resultant product, which should be reflected in export documents (shipping bills) also. |
| C1662 | Rod Thermostat of different size. | 1 No. | 1. MS Terminal Screw | 2 No. |
| 2. Plastic Base | 1 No. |
| 3. Plastic Cover | 1 No. |
| 4. Brass Base Plate | 1 No. |
| 5. Invar Rod of relevant size | 1 No. |
| 6. Brass Top Plate | 1 No. |
| 7. Ceramic Striker | 1 No. |
| 8. Brass Pillar Terminal | 1 No. |
| 9. Brass Calibration Nut | 1 No. |
| 10. Berillium Copper Switch Blade | 1 No. |
| 11. Silver Contact fixed | 1 No. |
| 12. Brass Pillar Terminal | 1 No. |
| 13. Plastic Knob | 1 No. |
| 14. Silver Contact Moving | 1 No. |
| Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part no., if any), etc., of the components sought for import should conform to those utilised in the manufacture of the resultant product, which should be reflected in export documents (shipping bills) also. |
| C1663 | PVC Insulated unarmoured control purpose copper cable upto 1.1 KV Size: 112/ 0.275 mm (6.8sq.mm) x 4 Core | 1000 Mtrs. | 1. Copper Cathode/ CC Rod/ Wire Bars/ Ingots | 251.713 kg |
| 2. PVC Resin | 129 kg |
| 3. Pthalate plasticize (DOP) | 64.5 kg |
| 4. Fillers (Calcium Carbonate/ Alumina/ Talc/ Kaoline | 21.5 kg |
| C1664 | PVC Insulated Unarmoured control purpose copper cable upto 1.1 KV Size: 112/ 0.30 mm (8 sq.mm) x 3 Core | 1000 Mtrs. | 1. Copper Cathode/ CC Rod/ Wire Bars/ Ingots | 223.8 kg |
| 2. PVC Resin | 126.8 kg |
| 3. Pthalate Plasticize (DOP) | 63.4 kg |
| 4. Fillers (Calcium Carbonate/ Alumina/ Talc/ Kaoline | 21.13 kg |
| C1665 | PVC Insulated Unarmoured Control purpose copper cable upto 1.1 KV Size: 72/ 0.24 mm (3.35 sq.mm) x 3 Core | 1000 Mtrs. | 1. Copper Cathode/ CC Rod/ Wire Bars/ Ingots | 88.102 kg |
| 2. PVC Resin | 94.854 kg |
| 3. Pthalate Plasticize (DOP) | 47.427 kg |
| 4. Fillers (Calcium Carbonate/ Alumina/ Talc/ Kaoline | 15.828 kg |
| C1666 | PVC Insulated Unarmoured Control purpose copper cable upto 1.1 KV Size: 72/ 0.24 mm (3.35 sq.mm) x 4 Core | 1000 Mtrs. | 1. Copper Cathode/ CC Rod/ Wire Bars/ Ingots | 117.456 kg |
| 2. PVC Resin | 114.6 kg |
| 3. Pthalate Plasticize (DOP) | 57.3 kg |
| 4. Fillers (Calcium Carbonate/ Alumina/ Talc/ Kaoline | 19.1 kg |
| C1667 | Harrow Disc Plain | 1 kg | 1. Alloy/ Non Alloy Steel Plates of relevant grade | 1.2 kg |
Annexure “D” to the
Public Notice No. 15
Dated: 01/06/2001
FOOD PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
| E103 | Cleaned Black Pepper Pinheads | 1 kg | 1. Black Pepper Pinheads | 1.02 kg |
| Note: Piperine content in import & export shall remain the same. |
Annexure “E” to the
Public Notice No. 15
Dated: 01/06/2001
PLASATIC PRODUCTS
| Sl.No. | Export Item | Qty. | Import Item | Qty Allowed |
| H438 | Multilayer Foiless Plastic Laminated tubes with or without Caps (5 Ply printed) | 1 Kg | 1. LDPE Granules | 1.17 kg/kg content in the export product |
| 2. LLDPE Granules | 1.17 kg/kg content in the export product |
| 3. Polyester Film | 1.12 kg/kg content in the export product |
| 4. Master Batch (70% titanium Di-oxide) | 1.12% of weight of LDPE Granules in the export product |
| 5. U.V. Ink | 0.5% of weight of LDPE/ LLDPE in the export product |
| 6. U.V. varnish | 0.3% of weight of LDPE/ LLDPE in the export product |
| 7. HDPE Granules (for Shoulder of tubes) | 1.05 kg/kg content in the export product |
| 8. Polypropylene Granules (for caps) | 1.05 kg/kg content in the export product |
| H439 | Aluminium Metallized PVC Film | 1 kg | 1. PVC Film | 1.10 kg |
| 2. Aluminium Wire | 0.0246 kg |
| 3. Induction/ Evaportion Boats | 0.007 Nos. |
| H440 | Aluminium Metallized BOPP Film | 1 kg | 1. BOPP Film | 1.10 kg |
| 2. Aluminium Wire | 0.0246 kg |
| 3. Induction/ Evaportion Boats | 0.007 Nos. |
Presented by eximkey.com