In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
2. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, (Vol.2) 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice are made.
3. In the statement of Standard Input Output Norms, following additions are made at appropriate places as mentioned below:-
After the existing entry at Sl.No.A-3421, new entries at Sl. No. A-3422 to A-3470 are added as per Annexure “B” to this Public Notice.
After the existing entry at Sl.No.C-1994, new entries at Sl. No. C-1995 to C-2006 are added as per Annexure “C” to this Public Notice.
This issues in public interest.
| Sl. No. | Page No. | Reference | Amendments/Corrections |
|---|
| 1 | 2 | 3 | 4 |
|---|
| 1. | 38 | Chemical & Allied Product Sl.No.A-175 | The quantity of import item at Sl. 1(iii), is amended to read as under:-
“2.45 kg/kg” |
| 2. | 38-39 | Chemical & Allied Product Sl.No.A-176 | The quantity of import item at Sl. 1(c), is amended to read as under:-
“2.79 kg/kg” |
| 3. | 3 | Chemical & Allied Product Sl.No.A-1030 (amended vide Public Notice No. 58 Dated:12.04.2004) | The description of import item at Sl. No. 1, the input word “Petroleum Coke” (without any other change) is amended to read as under:-
“Raw Petroleum Coke” |
| 4. | 3 | Chemical & Allied Product Sl.No.A-1050 (amended vide Public Notice No. 58 Dated:12.04.2004) | The description of import item at Sl. No. 1, the input word “Petroleum Coke” (without any other change) is amended to read as under:-
“Raw Petroleum Coke” |
| 5. | 146 | Chemical & Allied Product Sl.No.A1057 | The norm covered by this entry is substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1057 | Resin bonded Silicon Carbide Crucibles of various shapes & sizes | 1 kg | 1. Silicon Carbide | 0.369Kg. |
| 2. Graphite | 0.276Kg. |
| 3. Ferro silicon | 0.115Kg. |
| 4. Aluminium Oxide | 0.075Kg. |
| 5. Borax Anhydrous | 0.033Kg. |
| 6. Ball Clay | 0.015Kg. |
| 7. Hexamine | 0.009Kg. |
| 8. Phenol Formaldehyde Resin of relevant specification | 0.117Kg. |
| 6. | 175 | Chemical & Allied Product Sl.No.A-1457 | The norm covered by this entry is substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1457 | Para Chloro Benzyl Chyanide (Para Chloro Phenyl Acetonitrile or 4 Chloro Benzyl Cyanide) | 1 kg | 1. Para Chlor Toluene
OR | 1.180 kg |
| Para Chloro Benzyl Chloride | 1.282 kg |
| 2. Sodium Cyanide | 0.410 kg |
| 3. Azobis Iso Butyronitrile | 0.005 kg |
| 7. | 4 | Chemical & Allied Product Sl.No.A1944 (amended vide Public Notice No. 50 Dated:16.02.2004) | The quantity of import item at Sl. No. 1, is amended to read as under:-
“1.45 kg/kg” |
| 8. | 290 | Chemical & Allied Product Sl.No.A2268 | The description of export item is amended to read as under:-
“Geranyl Nitrile (Minimum Purity 94%)” |
| 9. | 307 | Chemical & Allied Product Sl.No.A2397 | The norm covered by this entry stands deleted. |
| 10. | 328 | Chemical & Allied Product Sl.No.A2561 | The quantity of import item at Sl. No.3, is amended to read as under:-
“0.03 kg/kg” |
| 11. | 333 | Chemical & Allied Product Sl.No.A2609 | The description of import item at Sl. No.1, is amended along with quantity to read as under:- |
“1. Citric Acid Monohydrate
OR | 0.70 kg |
| Citric Acid Anhydrous | 0.64 kg” |
| 12. | 36 | Chemical & Allied Product Sl.No.A3167 (amended vide Public Notice No.03 Dated:31/03/2003) | After the description of import item at Sl. No. 2, the following alternative import items (with quantity) is added:- |
“OR
Di Methyl Carbonate | 0.8 kg/kg” |
| 13. | 5 | Chemical & Allied Product Sl.No.A3237 (amended vide Public Notice No.77 Dated:26/08/2004) | The description of export item, is amended to read as under:-
“Flush Cyan for Printing Ink (40+/-1% Pigment and 34 +/-1% Solid Resin” |
| 14. | 19 | Chemical & Allied Product Sl.No.A-3244 (amended vide Public Notice No. 27 Dated:06.10.2003) | After the description of import item at Sl. No. 4, the following alternative import items (with quantity) shall be added:- |
“OR
1. Pivalic Acid (97%Min) | 1.15 kg |
| 2. Thionyl Chloride | 1.00 kg |
| 3. Caustic Soda (100% Basis) | 0.926 kg” |
| 15. | 16 | Chemical & Allied Product Sl.No.A3313 (amended vide Public Notice No.58 Dated:12/04/2004) | The norm covered by this entry is substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3313 | Para Chloro Benzyl Cyanide (Para Chloro Phenyl Acetonitrile OR 4 Chloro Benzyl Cyanide) | 1 kg | 1. Para Chloro Tolulene
OR | 1.180 Kg. |
| Para Chloro Benzyl Chloride | 1.282 Kg. |
| 16. | 1 | Chemical & Allied Product Sl.Nos. (Notified vide Public Notice No.11 Dated:01.10.2004) | On page No. 1 of the said Public Notice, the numbering of the Standard Input Output Norms entries is corrected to read as under:-
“After the existing entries at Sl. No. A3388, New Entries At. Sl. No. A-3389 to A-3421 are added as per Annexure “B” to this Public Notice” |
| 17. | 503 - 504 | Engineering Product Sl.No.C171 | The norm covered by this entry is substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C171 | Complete Ceiling fan (56") with or without Metal Blades and regulator | 1 No. | 1. Super Enamelled Copper Wire/ Copper Rod | 380 gm |
2. CRNGO Sheets/ Coils
OR | 3600 gm |
| Electric Stamping made out of CRNGO Sheets | 1500 gm |
| 3. Aluminium Alloy | 1200 gm |
| 4. Kraft Paper | 1000 gm |
| 5. Polypropylene | 150 gm |
| 6. M.S. Sheet | 250 gm |
| 7. Ball bearing/Bush | 2 Nos. |
| 8. Capacitor | Net to net |
| 9. Aluminium Sheet/ CRCA Sheet/ Aluminium Alloy (for Blades and False Cover of Fan) (Only the relevant item used in the export to be allowed) [to be permitted only in such cases where Blades/False Cover are also required to be exported alongwith export product] | 1.05 kg/ kg content in the export product. |
| 10. Regulator [to be allowed only in such cases where the same is required to be exported alongwith the export product] | 1 No. |
| 11. MS/GI Pipe | 1.02 Metre/ Metre content in export product |
| 12. MS Bright Bar | 1.05 kg/kg content in the export product. |
| 18. | 15 | Engineering Product Sl.No.C220 (amended vide Public Notice No.44 Dated:18/10/2002) | The description of import item at Sl. No. 1, (with quantity) is substituted to read as under:- |
“1. a) Angles of relevant grade of Steel
OR | 1.02 kg/kg content in export product |
| Billets of relevant Grade of Steel | 1.045 kg/kg content in export product |
b) Plates of relevant grade of Steel
OR | 1.05 kg/kg content in export product |
| Slabs of relevant grade of Steel | 1.075 kg/kg content in export product” |
| 19. | 16 | Engineering Product Sl.No.C474 (amended vide Public Notice No.03 Dated:31/03/2003) | The norm covered by this entry is substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C474 | Electrolytic Tin Plate | 1 kg | 1. Mild Steel Cold Rolled Wide Coil (Black Plate in Coil) | 1.006 kgs |
| Note : This norm is made effective retrospectively from 06.11.2002. |
| 20. | 623 | Engineering Product Sl.No.C565 | The norm covered by this entry stands deleted. |
| 21. | 625 - 626 | Engineering Product Sl.No.C593 | The description of import item at Sl. No. 1 (with quantity) is amended to read as under:- |
| “Non-Alloy HR Coils/Plates | 1.05 MT/MT content in the export product” |
| 22. | 648 | Engineering Product Sl.No.C755 | The norm covered by this entry stands deleted. |
| 23. | 648 | Engineering Product Sl.No.C756 | The norm covered by this entry stands deleted. |
| 24. | 648 | Engineering Product Sl.No.C757 | The norm covered by this entry stands deleted. |
| 25. | 649 | Engineering Product Sl.No.C758 | The norm covered by this entry stands deleted. |
| 26. | 649 | Engineering Product Sl.No.C759 | The norm covered by this entry stands deleted. |
| 27. | 649 | Engineering Product Sl.No.C760 | The norm covered by this entry stands deleted. |
| 28. | 649 | Engineering Product Sl.No.C761 | The norm covered by this entry stands deleted. |
| 29. | 649 | Engineering Product Sl.No.C762 | The norm covered by this entry stands deleted. |
| 30. | 649 | Engineering Product Sl.No.C763 | The norm covered by this entry stands deleted. |
| 31. | 649 | Engineering Product Sl.No.C764 | The norm covered by this entry stands deleted. |
| 32. | 649 | Engineering Product Sl.No.C765 | The norm covered by this entry stands deleted. |
| 33. | 649 | Engineering Product Sl.No.C766 | The norm covered by this entry stands deleted. |
| 34. | 755 | Engineering Product Sl.No.C1289 | The description of import item at Sl. No. 1 (with quantity) is amended to read as under:- |
| “Non-Alloy HR Coils/Plates | 1.05 MT/MT content in the export product” |
| 35. | 755 | Engineering Product Sl.No.C1290 | The description of import item at Sl. No. 1 (with quantity) is amended to read as under:- |
| “Non-Alloy HR Coils/Plates | 1.05 MT/MT content in the export product” |
| 36. | 756 | Engineering Product Sl.No.C1291 | The description of import item at Sl. No. 1 (with quantity) is amended to read as under:- |
| “Non-Alloy HR Coils/Plates | 1.05 MT/MT content in the export product” |
| 37. | 756 | Engineering Product Sl.No.C1292 | The description of import item at Sl. No. 1 (with quantity) is amended to read as under:- |
| “Non-Alloy HR Coils/Plates | 1.05 MT/MT content in the export product” |
| 38. | 797 | Engineering Product Sl.No.C1480 | 1. In the description of export item the word “Semi Automatic” stands deleted.
2. The quantity of import items at Sl. Nos. 16 & 17 is amended to read as under:-
“16. 1.04 kg/kg content in export product”
“17. 1.04 kg/kg content in export product”
3. After the description of import item at Sl. No. 17, the following additional inputs (with quantity) are added:- |
| “18. Galvanized Precoated Steel Sheet | 1.04 Kg./Kg content in export product |
| 19. High Impact Polystyrene | 1.04 Kg./Kg content in export product |
| 20. Aluminium Ingots | 1.04 Kg./Kg content in export product |
| 21. Styrene Acrylo Nitrile | 1.04 Kg./Kg content in export product |
| 22. Polyethylene Resin | 1.04 Kg./Kg content in export product |
| 23. Ethylene Vinyl Acetate | 1.04 Kg./Kg content in export product |
| 24. Polyacetal GC25 | 1.04 Kg./Kg content in export product |
| 25. Polyester band | Net to net |
| 26. Nylon Cloth for Capicitor Cover | Net to net |
| 27. S.S. Sheet for flat spring | Net to net |
| 28. Relevant insulated Copper Wire 0.5 mm dia | 1.01 metre/ metre content in export product |
| 29. Relevant grease | 4 gms/machine |
| 30. Other relevant Components | As per General Note No. 4 of Engineering Group |
| 39. | 478 | GENERAL NOTES FOR ENGINEERING PRODUCTS | After the general note at Sl. No. 6, the following general note is added:-
“7. Unless and otherwise specifically mentioned, steel products wherever allowed for import, would be in prime condition only and not in seconds/ defective condition/form” |
| 40. | 888 - 891 | Engineering Products Table No. 6 | The quantity of import item in Column 1 B at Sl. No. 58 for “3 Core x 300 sq. mm” is corrected to read as under:-
“2503.02 kg” |
| 41. | 1012 | Plastics Product Sl.No.H-289 | The description of import item at Sl. No. 6, (without any change in quantity) is amended to read as under:-
“Impact Modifier for PVC” |
| 42. | 1094 | Textile Product Sl.No.J-161 | The norm covered by this entry is substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| J-161 | Knitted Sweaters | 1 kg | 1. Relevant yarn (natural/ manmade) | 1.15 kg./kg. content in the export product |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3422 | Reactive Blue 3GRB (Dye content 92%) | 1 kg | 1. Acid Blue 40 | 0.820 kg |
| 2. Acrylic Acid | 0.273 kg |
| A3423 | Hydrotreating-cum-Desulphurisation catalyst Type : G-1 catalyst containing Zinc Oxide 85+/-3% and Molybdenum Trioxide 3.5+/-0.3% | 1 kg | 1. Zinc Metal | 0.694 kg |
| 2. Molybdenum Trioxide | 0.035 kg |
| A3424 | Direct Yellow 118 (Direct Yellow HAR P/C) (Dye content 86%) | 1 kg | 1. Amido G Acid | 0.638 kg |
| 2. Meta Toluidine | 0.244 kg |
| 3. MAA Base (3-((4-Amino-3 Methyoxy Phenyl)azo)- Benzene Sulphonic Acid) | 0.190 kg |
| 4. Sodium Nitrite | 0.147 kg |
| 5. Soda ash | 0.792 kg |
| 6. Sodium Acetate | 0.537 kg |
| 7. EDTA | 0.020 kg |
| 8. Sulphamic Acid | 0.008 kg |
| 9. PEG-400 | 0.013 kg |
| 10. Caustic Soda | 0.260 kg |
| A3425 | Direct Yellow 106 (Direct Yellow EFC LF/P/C) (Dye content 77%) | 1 kg | 1. 4 Nitro 4 Amino Stilbene-2, 2 Di-sulphonic Acid (NASDSA)
OR | 0.710 kg |
| 1(a)4,4 Dinitro Stilbene 2, 2 Disulphonic Acid (DNSDSA) | 0.898 kg |
| b) Soda Ash | 0.275 kg |
| c) Sodium Hydro Sulphide | 0.513 kg |
| 2. Sodium Naphthionate | 0.437 kg |
| 3. Sodium Nitrite | 0.124 kg |
| 4. Soda Ash | 0.142 kg |
| 5. Caustic Soda | 0.605 kg |
| 6. Copper Sulphate | 0.870 kg |
| 7. D-Glucose | 0.477 kg |
| 8. Ammonia | 0.633 kg |
| 9. Hyflo Supercel | 0.034 kg |
| 10. Activated Carbon | 0.027 kg |
| A3426 | BIS-(3,5,5-Trimethyl Hexanoyl) Peroxide, 75% in Odourless Mineral Spirit | 1 kg | 1. Isononyl Chloride | 0.896 kg |
| 2. Hydrogen Peroxide, 50% | 0.190 kg |
| 3. Odourless Mineral Spirit | 0.239 kg |
| A3427 | Reactive Blue 221 (Reactive Blue BRX) | 1 kg | 1. Cyanuric Chloride | 0.187 kg |
| 2. N-Ethyl Meta Base Ester | 0.310 kg |
| A3428 | 1-Phenyloxindole | 1 kg | 1. Diphenylamine | 1.20 kg/kg |
| 2. Toluene / IPA | 3.11 kg/kg |
| 3. Chloroacetyl Chloride | 0.81 kg/kg |
| 4. Aluminium Chloride | 0.81 kg/kg |
| Note: Back ward integration may be allowed for import item No. 3 and 4 as per SION at Sl. A-1277 and A-2616 and A-1064 as per policy. |
| A3429 | Diminazene Aceturate B-Vet. C-65 | 1 kg | 1. Para Nitro Benzoic Acid | 1.205 kg |
| 2. Dimethyl Formamide | 0.54 kg |
| 3. Glycine | 0.32 kg |
| A3430 | 2, 4 Dichloro Nitro Benzene | 1 kg | 1. Meta Dichloro Benzene | 1.00 Kg. |
| A3431 | 2-Acetyl Thiophene | 1 kg | 1. Thiophene | 0.741 Kg. |
| A3432 | 2, 4 D Iso Butyl Ester (Technical) | 1 kg | 1. Phenol | 0.550 kg |
| 2. Monochloro Acetic Acid | 0.466 kg |
| 3. Caustic Soda | 0.391 kg |
| 4. Iso Butanol | 0.290 kg |
| A3433 | Napthol AS-LS 4-Chloro-3 Hydroxy-2 5-Dimethoxy-2-Naphthanilide C.I. No. 37555 Azoic Coupling component 23 | 1 kg | 1. BON Acid. | 0.552Kg |
| 2. 2:5 Dimethoxy 4 Chloro Aniline | 0.527Kg |
| A3434 | Aqueous solution of 3-Methoxy Propylamine, 40% w/w | 1 kg | 1. 3 Methoxy Propyl Amine | 0.400 kg |
| A3435 | Antioxidant containing mixed Tert-Butyl Phenols : 25% N,N di sec butyl -p-Phenylene Diamine :75% | 1 kg | 1. Mixed Tert-Butyl Phenols | 0.25 kg |
| 2. N,N’ , Di-Sec-Butyl p-Phenylene-Diamine | 0.75 kg |
| A3436 | 3-Bromo Thiophene | 1 kg | 1. Thiophene | 0.86 Kg. |
| A3437 | Direct Red 80 (Dye content 65%) | 1 kg | 1. J. Acid Urea | 0.200 kg |
| A3438 | Acid Violet 90 (cololan Bordeaux MB) (61% Dye content) | 1 kg | 1. Beta Nepthol | 0.253 kg |
| 2. 1 Phenyl-Methyl 5 Pyrazolone | 0.237 kg |
| 3. Sodium Nitrite | 0.231 kg |
| 4. Twitchell oil | 0.020 kg. |
| A3439 | Sodium 2 Ethyl Hexonate | 1 kg | 1. 2-Ethyl Hexanoic Acid | 0.870 kg |
| A3440 | Acetyl Tributyl Citrate | 1 kg | 1. Citric Acid Mono Hydrate | 0.645 kg |
| 2. N-butyl Alcohol | 0.682 kg |
| 3. Acetyl Chloride | 0.217 kg |
| A3441 | Meta Chloro per Benzoic Acid (77% purity) | 1 kg | 1. 3 Chloro Benzoic Acid | 0.760 Kg. |
| 2. Tertiary Butanol | 3.5 Kg. |
| A3442 | Flush Yellow for printing Ink (35+/-1% Pigment & 32+/-1% Solid Resin) | 1 kg | 1. Pigment Yellow-12 | 0.36Kg. |
| 2. Printing Ink Vehicle Plain (Solid content 61+/-2%) (Linseed Oil Base or Soyabean Oil base) | 0.34Kg. |
| 3. Alkyd Resin, Namely, Soya long oil alkyd resin of 70% oil length having solid content 100% / Linseed oil based alkyd resin (Long oil length) having solid content 100% | 0.12Kg. |
| 4. Petroleum Distillate (distillation range 240-330 Degree C) | 0.13Kg. |
| 5. Oleyl Alcohol | 0.03Kg. |
| 6. Antioxidant, namely, BH.T and MEHQ | 0.01Kg. |
| 7. Texanol Isobutyrate | 0.03Kg. |
| A3443 | Pigment Alkali Blue Flush (Pigment content 40+/-2%, Solid Resin content 37+/-1%) Formaldehyde Route | 1 kg | 1. Aluminium Chelate | 0.00600Kg. |
| 2. Aniline | 1.33720Kg. |
| 3. Caustic Soda Flakes/ Lye on 100% basis | 0.29920Kg. |
| 4. Dimer Fatty Acid | 0.00201Kg. |
| 5. Dodecyl Phenol | 0.00969Kg. |
| 6. Formaldehyde (37%) | 0.14640Kg. |
| 7. Fumaric Acid | 0.00502Kg. |
| 8. Iso Phthalic Acid | 0.01304Kg. |
| 9. Maliec Anhydride | 0.00100Kg. |
| 10. Para Octyl Phenol | 0.01103Kg. |
| 11. Para Tertiary Butyl Phenol | 0.00602Kg. |
| 12. Paraformaldehyde | 0.01472Kg. |
| 13. Pentaerythritol | 0.03580Kg. |
| 14. Petroleum Distillate (Distillation range 240-330 Degree Centigrade) | 0.24120Kg. |
| 15. Rosin, namely, Gum Rosin/ Tall Oil Resin | 0.2538Kg. |
| 16. Sodium Nitrate | 0.23760Kg. |
| 17. Soyabean Oil | 0.07691Kg. |
| 18. Vista Oil | 0.00259Kg. |
| 19. Wetting Agent (Tauranol) | 0.13200Kg. |
| A3444 | Offset printing ink in Various colours other than Black, Cyan, Magenta and Yellow (Min. pigment content 14+/-1%) and Solid Resin 43+/-1%) (Flush Route) | 1 kg | 1. Flush in Various Colours for Printing Ink (35+/-1% Pigment & 32+/-1% Solid Resin) | 0.4120Kg. |
| 2. Printing Ink Vehicle Gel (Solid content 59+/-1%) (Linseed Oil Base OR Soyabean Oil Base) | 0.2575Kg |
| 3. Printing ink vehicle Plain (Solid Content 61+/-1%) Linseed Oil Base OR Soyabean Oil Base. | 0.2575Kg. |
| 4. Polyethylene Wax Compound Containing 43+/-1% Polyethylene Wax, 29+/-1% Tung Oil and 28+/-1% Refined Linseed Oil | 0.0310Kg. |
| 5. PTFE Wax compound containing 61+/-1% PTFE Wax and 33+/-1% Refined Linseed Oil. | 0.0020Kg. |
| 6. Cobalt Magnesium combined Drier (Metal content 12+/-0.2%). | 0.0103Kg. |
| 7. Petroleum Distillate (Distillation range 240-330 Degree C) | 0.0591Kg. |
| A3445 | Olefin Copolymer Viscosity Index Improver (Containing 85%+/-1% base oil and 15%+/- 1%) Ethylene Polypropylene Copolymer | 1 kg | 1. Base Oil (SN-150/150 N) | 0.845 Kg. |
| 2. Ethylene Propylene Copolymer | 0.155 Kg. |
| A3446 | Catalyst 59-5/59-M containing ZnO 36% and Na2O 17% Al2 O3 30% | 1 kg | 1. Zinc Carbonate | 0.616 Kg. |
| 2. Sodium bicarbonate | 0.511 Kg. |
| 3. Alumina Trihydrate | 0.480 Kg. |
| 4. Atta gel | 0.154 Kg. |
| A3447 | Ethylene Glycol Mono Ethyl Ether | 1 kg | 1. Denatured Ethyl Alchol | 1.154 Kg. |
| 2. Triethyl Amine Catalyst | 0.004 Kg. |
| A3448 | Synthetic Tanning Agent containing Sodium salt of phenol sulphonic acid polymer with formaldehyde and urea (53%) Disodium Phthalate (12%) | 1 kg | 1. Phenol | 0.217 Kg |
| A3449 | N-N—DI-Sec-Butyl Para Phenylenediamine] | 1 kg | 1. Para Nitro Aniline | 0.680 Kg. |
| 2. Methyl Ethyl Ketone | 0.790 Kg. |
| 3. Platinum Catalyst (Platinum content 3%) | 0.20 Gm. |
| A3450 | Alpha (2, 4-Chlorophenyl) Ethyl)-alpha (1,1-dimethylethyl) 1H-1,2,4-Triazole-1-ethanol) | 1 kg | 1. Dipentone (1-(4-Chlorophenyl)4,4 dimethyl Pentane-3-one) | 1.15 Kg. |
| 2. Dimethyl Sulfide | 0.50 Kg. |
| 3. Formic Acid | 0.32 Kg. |
| 4. Hydrazine Hydrate | 0.66 Kg. |
| 5. Potassium Carbonate | 1.02 Kg. |
| 6. Dimethyl Formamide | 1.00 Kg. |
| 7. N-Heptane | 1.00 Kg. |
| A3451 | N-Isopropyl-N-Phenyl-P-Phenylenediamine | 1 kg | 1. P-Amino Diphenyl Amine | 0.816 Kg. |
| 2. Acetone | 0.319 Kg. |
| 3. Platinum Catalyst (Platinum content 3%) | 0.098 gm. |
| A3452 | Tri Phenyl Phosphine | 1 kg | 1. Sodium Metal | 0.905 kg |
| 2. Yellow Phosphorous | 0.206 kg |
| 3. Monochloro Benzene | 2.378 kg |
| 4. Methanol | 1.50 kg |
| 5. Toluene | 2.00 kg |
| A3453 | Solvent Orange3-(Chrysodine Y base) | 1 kg | 1. Meta Phenylene Diamine | 0.582Kg. |
| 2. Aniline | 0.480Kg. |
| A3454 | Direct Red 239 (Dye content 68%) | 1 kg | 1. J-Acid Urea | 0.363 kg. |
| 2. Beta Naphthol.. | 0.331 kg. |
| A3455 | Pyridine Hydrochloride | 1 kg | 1. Pyridine
OR | 0.760Kg. |
1(a) Silica Alumina Catalyst
OR | 0.027Kg. |
| 1(a) Alumino Silicate Catalyst | 0.0144Kg. |
| 1(b) Ethyl Alcohol (Denatured) | 1.767Kg. |
| 1(c) Methanol | 1.072Kg. |
| 2. Toluene | 0.429Kg. |
| A3456 | 3,5-Dimethyl Piperidine | 1 kg | 1. Propionaldehyde | 8.000Kg. |
| 2. Alumina Silica Catalyst | 0.175Kg. |
| 3. Ruthenium Catalyst (Ruthenium content 5%) | 0.007Kg. |
| A3457 | 3 Acetyl Pyridine | 1 kg | 1. Ethyl Acetate
OR | 1.770 Kg. |
| 1(a)Ethyl Alcohol denatured | 0.915 Kg. |
| 1(b)Acetic Acid Glacial | 1.267 Kg. |
2.Methyl Nicotinate
OR | 1.572 Kg. |
2. 3-Cyanopyridine
OR | 1.619 Kg. |
| 2(a)Alumina Silica Catalyst | 0.037 Kg. |
| 2(b)Denatured Ethyl Alcohol | 3.842 Kg. |
| 2(c) Methyl Alcohol | 2.275 Kg. |
| A3458 | Sodium Antimonate | 1 kg | 1. Antimony Trioxide | 0.783 kg. |
| A3459 | Oxy Aluminium Octoate/ Aluminium Chelate (Aluminium content 5.9+/- 1%) | 1 kg | 1. Aluminium Isopropoxide | 0.362 Kg. |
| 2. Ethyl Aceto Acetate | 0.444 Kg. |
| 3. Neopentyl Glycol | 0.142 Kg. |
| 4. Petroleum Distillate (distillation range: 240-330° centigrade) | 0.222 Kg. |
| 5. Mineral Turpentine Oil | 0.111 Kg. |
| A3460 | Alkali Blue (Pigment Blue 61) C.I. No. 42765.1 | 1 kg | 1. Aniline | 3.343Kg. |
| 2. Formaldehyde(37%) | 0.366Kg. |
| 3. Wetting agent (tauranol) | 0.330Kg. |
| 4. Sodium Nitrate | 0.594Kg. |
| 5. Caustic Soda lye / flakes on 100% basis | 0.748Kg. |
| A3461 | Preservative containing :
i) N-Octyl Isothiozolinone (45%) 3.2%-3.4%
ii) Benzimidazole Carbamate 8-10.5%
iii) N( N,N Di-Methyl Amino Carbonyl) 3,4 Dichloro Aniline 20-22% | 1 kg | 1. N-Octyl Isothiozolinone (45%) | 0.0733 kg |
| 2. Benzimidazole Carbamate (Carbendazine Technical) | 0.0925 kg |
| 3. N( N,N Di-Methyl Amino Carbonyl) 3,4 Dichloro Aniline (Diuron Technical) | 0.210 kg |
| 4. Isodecyloxy Propyl Amine (30%) Acetate) | 0.0028 kg |
| A3462 | 1,2,4 Trichloro Benzene | 1 kg | 1. Ortho Dichloro Benzene | 1.10 Kg. |
| A3463 | Low Voltage Porcelain Insulators of following types (Bushing, Shackle Teel, Spool, Stay Guy, Coach Screw Machine Screw, Telephone Insulators) | 1000 kg of porcelain body | 1. Ball Clay | 200 Kg. |
| 2. Bentonite | 150 Kg. |
| 3. SMC/ CMC | 2.5 Kg. |
| 4. SKO/ MTO | 0.6 K.L. |
| 5. HSD/ LDO | 0.6 K.L. |
| 6. Green Chrome Oxide | 1 Kg. |
| 7. Zinc Oxide | 1 Kg. |
| 8. Manganese Dioxide | 1 Kg. |
| 9. Blue or Grey strain (Allowed only in case of Blue or Grey Insulators) | 0.8 Kg. |
| A3464 | Dimethyl Lauryl Amine Oxide (Active matter 28-32%) | 1 kg | 1. Dimethyl Lauryl Amine | 0.266 Kg. |
| 2. Hydrogen Peroxide 50% | 0.088 Kg. |
| A3465 | Triprolidine | 1 kg | 1. 2-Bromo Pyridine | 2.266 Kg. |
| 2. Pyrrolidine | 1.03 Kg. |
| 3. N-Butyl Lithium | 1.00 Kg. |
| 4. Para Formaldehyde | 0.90 Kg. |
| 5. Di Iso Propyl Ether | 1.63 Kg. |
| 6. Acetone | 3.50 Kg. |
| A3466 | N- Methyltriethanol Ammonium fatty acid Diester Methosulphate 88-90% in Isopropyl alcohol | 1 kg | 1. Distilled Palm fatty Acid | 0.670 kg. |
| 2. Triethanolamine | 0.185 Kg. |
| 3. Iso Propyl alcohol | 0.102 Kg. |
| A3467 | 3a 7B Dioxy Cholanic Acid | 1 kg | 1. 3a 7a Dihydroxy 5B Cholan-24-OIC Acid Technical Grade | 1.218 kg. |
| 2. Sodium Metal | 1.32 kg. |
| 3. Sodium Bromate | 0.79 kg. |
| 4. Secondary Butanol | 7.17 kg |
| A3468 | 5-Sulfo Salicylic Acid | 1 kg | 1. Salicylic Acid | 0.680kg. |
| A3469 | Oryzalin technical 98% Min. | 1 kg | 1. Potassium-4 Chloro 3,5 Nitro Benzene Sulphonate | 1.340 kg |
| 2. Di-N-propyl Amine | 0.490 kg |
| 3. Thionyl Chloride | 0.720 kg |
| 4. Dimethyl Formamide | 0.088 kg |
| 5. Benzene | 2.000 kg |
| A3470 | Rofecoxib | 1 kg | 1. Methylene Chloride | 4.00 kg |
| 2. Acetyl Chloride | 0.64 kg |
| 3. Methanol | 2.00 kg |
| 4. Thioephenol | 1.10 kg |
| 5. Acetic Acid | 2.00 kg |
| 6. Tetrahydrofuran | 2.00 kg |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1995 | Refrigerator | 1 No. | 1. Copper Coated M.S. Tube | 1.02 Mtr./ Mtr. content in export product of relevant specification used in export item
OR
1.02 Kg./Kg. content in export product. |
| 2. Care 30 gas | Net to net. |
| 3. Cyclopantane | 1.04 Kg./Kg. content in export |
| 4. Isocyanate | 0.416 Kg./Kg. content of Foam in the export product |
| 5. Polyol | 0.624 Kg./Kg. content of Foam in the export product |
| 6. Isobutane | 1.04 Kg./Kg. content in export product |
| 7. CRCA | 1.04 Kg./Kg. content in export product |
| 8. HIP Sheet | 1.04 Kg./Kg. content in export product |
| 9. General Purpose Polystyrene | 1.04 Kg./Kg. content in export product |
| 10. Polypropylene Homo Polymer | 1.04 Kg./Kg. content in export product |
| 11. Polypropylene Copolymer | 1.04 Kg./Kg. content in export product |
| 12. Pre-Coated Steel Sheets | 1.04 Kg./Kg. content in export product |
| 13. Lock Prop | 1.04 Kg./Kg. content in export product |
| 14. Double Tack Tape | Net to net. |
| 15. Other Relevant Component | Net to net. |
| C1996 | Air Cooled Fluid Cooler | 1 No. | 1. Seamless Copper Tube | 1.01 Kg./Kg. content in export product. |
| 2. Heresite Coating | 2% of FOB value. |
| C1997 | Copper Circle (in sheet form) | 1 kg | 1. Copper Cathode | 1.03 Kg. |
| C1998 | Chairs | 1 No. | 1. Polyol. | 0.63 Kg. of the weight of the Foam. |
| 2. Isocyanate | 0.42 Kg. of the weight of the Foam. |
| 3. Relevant Fabric/ Leather cloth | 1.10 Sq.m/ Sq.m content |
| 4. CRCA Mild Steel Sheets | 1.05 Kg./Kg. content in export product. |
| 5. Gas Spring | Net to net. |
| 6. Chair Mechanism | Net to net. |
| 7. Caster | Net to net. |
| C1999 | Modular Work Station. | 1 No. | 1. Relevant Pre laminated/ Plain particle Board | 1.05 Sq.m/ Sq.m content in export product. |
| 2. CRCA Mild Steel Sheet | 1.05 Kg./Kg. content in export product. |
| 3. Relevant Aluminium Alloy Ingot | 1.05 Kg./Kg. content in export product. |
| 4. PVC Plastic Sheet (8mm to 25mm wide) | 1.02 Metre/ Metre content in export product. |
| C2000 | Stainless Steel Travelling Guard | 1 kg | 1. Cold Rolled Stainless Steel Sheet Coil of relevant grade | 1.05 Kg. |
| C2001 | Platinum Ingots Min Purity 99.95%
Palladium Ingots Min Purity 99.95%
Gold Ingots Min. Purity 99.5%
Silver Ingots
Min Purity 99.9%
Rhodium Powder Min Purity 99.5%
Iridium Powder Min Purity 99.5%
Ruthenium Powder Min Purity 99.5%
Osmium Powder Min Purity 99.5% | 1 kg | 1. Precious Metal Ores & Concentrates containing any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium.
OR | 1.02 Kg./Kg. content of precious metal in export product. |
| 2. Waste and Scrap of precious metal or metal clad with precious metal; other waste and Scrap containing precious metal or precious metal compounds of a kind used principally for the recovery of any one or more precious metals viz. Platinum, Palladium, Gold, Silver, Rhodium, Iridium, Ruthenium, Osmium. | 1.02 Kg./Kg. content of precious metal in export product. |
| Note: Each of the precious metal contained in the above input material as declared in the import documents is to be accounted for in the export product. |
| C2002 | Expansion Fasteners made of Non Alloy Steel | 1 kg | 1. Non Alloy Steel Round Bar | 1.10 Kg./ Kg. content in export product. |
| 2. Non Alloy Steel Sheet. | 1.47 Kg./ Kg. content in export product. |
| C2003 | Hot Rolled Non-alloy Steel (Pickled/ Un-pickled) Plates/ Sheets/ Strips/ Wide Coils | 1 MT | 1. Non-alloy Steel melting Scrap, Pig Iron/Hot Metal, Sponge Iron including Hot Briquetted Iron (HBI). | 1150 Kg. |
| 2. Low Silica Lime Stone | 76 Kg. |
| 3. (a) Bulk Ferro Alloys (Ferro Silicon/Ferro Manganese/Silicon Manganese) | 8.4 Kg. |
| (b) Special Ferroalloys/metals (Ferro Chrome/ Ferro Vanadium/ Ferro Niobium/ Nickel Oxide Sinter/ Ferro Nickel/ Ferro Aluminium/ Ferro Titanium/Ferro Boron/Ferro Phosphorous/Magnesium Metal/ Ferro Molybdenum) | 2.6 Kg. |
4. Additives:
(a) Aluminium wires/scraps/shots/ingots and/or Aluminium Powder in Cored wire. | 3.0 Kg. |
| (b)CaSi/ CaFe Lumps, CaFeAl/ CaFe/ CaSi Powder in Cored wire. | 0.5 Kg. |
| (c) Met Coke/Raw Pet. Coke/Calcined Pet Coke. | 4 Kg. |
5. Consumables/ Misc.
(a)Rolls for caster and rolling mill. | 0.5 Kg. |
| (b)Copper mould for casting. | 0.02 Kg. |
| (c)Casting Powder | 1 Kg. |
| (d)Rolling Mill Oil/ Hydraulic Oil/ Lubricating Oil | 3 Kg. |
| (e)Celox Inserts/ Oxygen Probes/ Sampler Probes. | 0.10 Kg. |
| (f)Shear Blades/ Saw Blades. | 0.01 Kg. |
| (g)Oxygen Lance Pipes. | 0.12 Kg. |
| (h)Temperature Tips/ Sampler Tips/ Thermodynamic elements. | 0.20 Kg. |
| (i) Graphite Electrodes. | 2.4 Kg. |
6. Refractories:
(a)Shaped Refractories (Fired/Unfired Bricks/ Shapes) | 3 Kg. |
| (b)Monolithic Refractories (including Castables, ramming mass/ gunning mixes) | 6 Kg. |
| (c)Special Refractories i.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/Zirconia Nozzles & Tundish Nozzles. | 1 Kg. |
7. Energy Sources:
(a) LPG (for Supersonic Oxygen lance in EAF) | 4 Kg. |
| (b) LDO (or preheating of ladle and heating of thin slab in tunnel furnace). | 20 Kg. |
| (c)Natural Gas/ LNG (for Tundish & SEN heating) | 0.25 SCM |
Note: 1. This norm is applicable for export product manufactured through Electric Arc. Furnace (CONARC process)-Thin Slab Caster-Hot Strip Mill.
Note:2. Quantity of Pig Iron/Hot Metal and Sponge Iron/HBI allowed against S.No.1 shall not exceed 60% and 35% respectively of the total quantity permitted therein.
Note:3. Import of Silico manganese allowed at S.No.3(a) shall not exceed 60% of the total quantity of import.
Note:4. Special Ferro Alloy(s)/Metal against S.No.2(b) will be allowed only if the respective alloying element(s)/metal is/are actually present in the export product.
|
| C2004 | Black Pipe | 1 MT | 1. Hot rolled carbon steel strips/ coils/ plates other than high carbon steel | 1.05 MT |
| C2005 | Precision Steel Tubes | 1 MT | 1. Cold rolled carbon steel strips/ coils/ plates other than high carbon steel | 1.05 MT |
| C2006 | Trumpet Horns | 1 kg | 1. CRCA Steel Strip 0.6 x 12 | 1.07 Kg/ kg content in the export product |
| 2. CRCA Steel Strip 0.4 x 85 | 1.20 Kg/ kg content in the export product |
| 3. CRCA Steel Strip 0.33 x 85 | 1.20 Kg /kg content in the export product |
| 4. Alu-Zinc Steel Strip 1.25 x 118.4 | 1.22 Kg/ kg content in the export product |
| 5. Super Enamelled Copper Wire | 1 Kg/ kg content in the export product |
| 6.ABS Blacks | 1.05 Kg/kg content in the export product |
| 7. Hexagonal Nut | Net to net |
| 8. Contact Point | Net to net |