Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

DGFT Notification, Circulars... Public Notices Public Notices w.e.f 01/04/2003 PUBLIC NOTICE NO. 77(RE-03), DT. 26/08/2004

PUBLIC NOTICE NO. 77(RE-03), DT. 26/08/2004

Fixation and modification of input and output norms

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entries at Sl. No. A3378, New Entries At. Sl. No. A-3379 to A3388 are added as per Annexure B to this Public Notice.

[OLD- After the existing entry at Sl. No.A-3332, new entries at Sl.No. A-3333 to A-3378 shall be added as per Annexure ”B” to this Public Notice. ]

ENGINEERING PRODUCTS

After the existing entry at Sl. No. C- 1975, New entries at Sl. No. C1976 to C1985 are added as per Annexure C to this Public Notice

[OLD- After the existing entry at Sl.No.C-1967, new entry at Sl.No.C-1968 to C-1975 shall be added as per Annexure “C” to this Public Notice. ]

TEXTILE PRODUCTS

After the existing entry at Sl. No. J-361 New entry at Sl. No. J-362 is added as per Annexure D to this Public Notice

[OLD-After the existing entry at Sl.No.J-359, new entry at Sl.No.J-360 to J-361 shall be added as per Annexure “E” to this Public Notice. ]

(In above part numbering of SION has been corrected vide PN No. 11/2004, Dt. 01/10/2004)

5. This issues in public interest.

Sd/-
(GOPAL K. PILLAI)
DIRECTOR GENERAL OF FOREIGN TRADE

Sd/-
(SBS Reddy)
Jt.. DIRECTOR GENERAL OF FOREIGN TRADE

(F.No.01/87/171/00002/AM04/DES-VIII)

Annexure “A” to the
Public Notice No. 77
Dated: 26/08/2004

AMENDMENTS/CORRECTIONS

Sl.No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	164	Chemical & Allied Product Sl.No.1316	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1316	Diethylamine (minimum Purity 98%)	1 kg	1. Denatured Alcohol (Purity not more than 98%)	1.311 kg
A1316	Diethylamine (minimum Purity 98%)	1 kg	2. Nickel Catalyst	0.0017 kg
2.	4	Chemical & Allied Product Sl.No.A1377 (amended vide Public Notice No.15 Dated:07/07/2003)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1377	Linear Alkyl Benzene	1 kg	A. For HF Process 1. N-Paraffin	0.950 kg.
			2. Benzene	0.400 kg.
			3. Dehydrogenation Catalyst For Pacol process (DeH07) DeH-11, DEH-101 & DeH-201, DHC-2 & NDC-4 & the like	0.00035 kg.
			4. HF Acid	0.002 kg.
			5. KOH	0.002 kg.
			6. Fuel Oil/LSWR	0.55 kg.
			7. Heat Transfer Oil	0.0045 kg
			OR B. For Detal Process 1. N-Paraffin	0.950 kg.
			2. Benzene	0.400 kg.
			3. Dehydrogenation Catalyst For Pacol process (DeH-7), DeH-11, DEH-101 & DeH-201, DHC-2 & NDC-4 & the like	0.00035 kg.
			4. Detal Catalyst	0.00081 kg.
			5. PEP Adsorbent	0.00017 kg
			6. Define Catalyst	0.00004 kg.
			7. Normal Pentane	0.0043 kg.
			8. Fuel Oil/LSWR	0.55 kg.
			9. Heat Transfer Oil	0.0045 kg.
3.	169	Chemical & Allied Product Sl.No.A1379	The norm covered by this entry shall be deleted.
4.	177	Chemical & Allied Product Sl.No.A1475	After the description of import item at Sl. No.7, the following additional import item (with quantity) shall be added:-
4.	177	Chemical & Allied Product Sl.No.A1475	8. Furnace Oil (F.O) /Heavy Fuel	0.1020 kg
5.	276	Chemical & Allied Product Sl.No.A2156	The norm covered by this entry shall be deleted.
6.	330	Chemical & Allied Product Sl.No.A2585	The description of import item at Sl. No. 1, (with quantity) shall be amended to read as under:-
			1. Glyoxal 40%	3.00 kg
			OR Methyl 5-Nitro Imidazole	1.74 kg
7.	16 - 17	Chemical & Allied Product Sl.No.A3130 (amended vide Public Notice No.54 Dated:03/01/2003)	The description of import item at Sl. No. 1(c), (without any change in quantity) shall be amended to read as under:- “Cobalt oxide / Copper Oxide/ Relevant Pigment for Ceramics”
8.	17 - 18	Chemical & Allied Product Sl.No.A3131 (amended vide Public Notice No.54 Dated:03/01/2003)	The description of import item at Sl. No. 2b(1), (with quantity) shall be amended to read as under:-
8.	17 - 18		2b(1). Fibre Glass Net of relevant specification	Net 5% wastage
9.	18 - 19	Chemical & Allied Product Sl.No.A3132 (amended vide Public Notice No.54 Dated:03/01/2003)	The description of import item at Sl. No. 2b, (with quantity) shall be amended to read as under:- “2b. GLUE - 13.46 MT”
10.	23	Chemical & Allied Product Sl.No.A3237 (Notified vide Public Notice No.70 Dated:29.06.2004)	The description of export item shall be amended to read as under:- “Offset Printing Ink-Cyan for Printing Ink (40+/-1% Pigment and 34+/-1% Solid Resin)” instead of “Offset Printing Ink-Cyan for Springing Ink (40+/-1% Pigment and 34+/-1% Solid Resin)”
11.	1	GENERAL NOTES FOR ALL EXPORT PRODUCT GROUPS (amended vide Public Notice No. 13 Dated:20/05/2002)	The General Notes for All Export Product Groups at Sl. No. 11 shall be deleted.
12.	631	Engineering Product Sl.No.C641	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C641	Fabricated Steel Hardware/Structure/Articles not elsewhere specified made out of Non Alloy/Alloy/Stainless Steel Plates/Sheets/ Wide Coils/Strips	1 kg	1. Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips	1.05 Kg./Kg. content in export product
C641		1 kg	2. Zinc Ingot (to be allowed only in case the product is Galvanised)	1.04 Kg./Kg. content in export product
13.	644	Engineering Product Sl.No.C722	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C722	M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated	1 kg	1. M.S. Wire Rod	1.05 kg.
			2. Nickel OR	0.97% of weight of Steel to be Nickel Plated
			Zinc OR	0.97% of weight of Steel to be Zinc plated
			Copper OR	0.97% of weight of Steel to be Copper plated
			Powder Paint	0.97% of weight of Steel to be Powder Painted
14.	746	Engineering Product Sl.No.C1214	The quantity of import item at Sl. No. 1, shall be amended to read as under:- “1.20 kg/kg content of brass in the export product”
15.	8	Engineering Product Sl.No.C1376 (amended vide Public Notice No. 31 dated:05/11/2003)	The description of export item shall be amended to read as under:- “Machined cast bushings of Automotive & Non-Automotive application, Machined cast components for valves internals including casing, impellers, discs, plugs, yoke sleeves, Yoke bushes, seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Silicon brass/ Silicon bronze/high tensile brass or with copper and alloying elements, like Zinc varying from 10-35% and other elements like Aluminium, Manganese, Silicon, Iron Lead each not exceeding 5% conforming to ASTM B584-C87500, C87600, C87610/ASTM B371”
16.	9	Engineering Product Sl.No.C1377 (amended vide Public Notice No. 31 dated:05/11/2003)	The description of export item shall be amended to read as under:- “Machined cast bushings of Automotive & Non-Automotive application, Machined cast components for valves internals including casing, impellers, discs, plugs, yoke sleeves, Yoke bushes, seals, spacers and bearing, Hexagonal nuts, earthing clamps, spindle, stems, wedges, seat rings etc. manufactured out of Aluminium Bronze or with copper and alloying elements like Aluminium 8 to 11% and Iron 1.5 to 3.5 conforming to BS 1400-AB1/ASTM B 148-C95200, C95300/DIN 1714 GCUAL 10 FE”
17.	789	Engineering Product Sl.No.C1420	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1420	Fine Cobalt Powder Grain size 0.5-2 Micron	1 kg	1. Cobalt Granules/ Cobalt Briquettes/ Cobalt Cathode or	1.04 Kg.
C1420	Fine Cobalt Powder Grain size 0.5-2 Micron	1 kg	Cobalt Chloride Solution containing Cobalt Metal	1.04 Kg. of Cobalt contained in Cobalt Chloride Solution
18.	840	Engineering Product Sl.No.C1640	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1640	Fiberglass /Synthetic Filter Bags of different sizes with Snap Ring made of Stainless Steel AISI 301 and other fittings	1 No.	1. Fiberglass / Synthetic Filter Cloth of relevant GSM	1.02 Sq. Yard/Sq. Yard of cloth in export product
			2. Fiberglass / Synthetic Sewing Thread	1.01 kg./kg. Content in export product
			3. Stainless Steel Strip AISI 301	1.02 kg./kg. Content in export product
19.	10	Engineering Product Sl.No.C1647 (amended vide Public Notice No.27 Dated:01/08/2002)	The description of import item (in Raw material) at Sl. No. 15, (with quantity) shall be amended to read as under:-
			15(a) Relevant Welding Electrodes/ Welding Wires	2% of the weight of steel to be Welded
			(b) Relevant Flux	Equal to the weight of welding wires”
20.	868	Engineering Product Sl.No.C1734	1. The description of export product shall be amended to read as under:- “Non Cast Hardware Fittings made of Non Alloy/Alloy/Stainless Steel Rod” 2. The description of import item at Sal. No. 1, (without any change in quantity) shall be amended to read as under:- “Non Alloy/Alloy/Stainless Steel Rod of relevant grade”
21.	46 & 11	Engineering Product Sl.No.C1884 (amended vide Public Notice No. 03 Dated: 31.03.2003 & Public Notice No. 20 Dated 01/08/2003)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1884	Seamless Steel Casing and Tubing.	1 kg	1. Alloy/Non Alloy Steel Billets/Rounds of relevant grade.	1.25 Kg
			2. Thread Protectors	Net to net
			3. Thread Inserts/Cut-Off Blades	Upto 2% of FOB
22.	16 & 478 of HBP (Vol-II) PART-II	GENERAL NOTES FOR ENGINEERING PRODUCTS (amended vide Public Notice No.06 Dated:08.05.2003)	After the General not for Engineering products at SL. No. 5, the following General note shall be added:- “Note:6. Where the manufacturing process commences from raw material stage the export product may be allowed to be exported in CKD/SKD condition.”
23.	36 - 37	Leather Product Sl.No.G-7 (amended vide Public Notice No.70 Dated:29.06.2004)	The description of import item at Sl. No. 12(c), (without any change in quantity) shall be corrected to read as under:- “For Vegetable-Chrome Combination Tanned Leather (Semi-Chrome tanned Leather)”
24.	38 - 39	Leather Product Sl.No.G-46 (amended vide Public Notice No.70 Dated:29.06.2004)	The description of import item at Sl. No. 12(c), (without any change in quantity) shall be corrected to read as under:- “For Vegetable-Chrome Combination Tanned Leather (Semi-Chrome tanned Leather)”
25.	9 & 11	Plastics Product Sl.No.H-45 (Notified vide Public Notice No.61 Dated:03/02/2003) & amended vide Public Notice No. 10 Dated:30.05.2003)	After import item at Sl. No. 1, (with quantity) shall be amended to read as under:-
25.	9 & 11		2. HSD/LDO/Furnace Oil (For Power generation)	0.512 litres
26.	1084 - 1085	Textile Product Sl.No.J-92	The foot note at Sl. No. 2 shall be amended to read as under:- “Note:2. The above norms for fuels are applicable to units having spinning, weaving and processing activities or only weaving and processing activities as the case may be”

Annexure “B” to the
Public Notice No. 77
Dated: 26/08/2004

CHEMICALS AND ALLIED PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3379	2, Acetyl Naphthalene (Beta Methyl Naphthyl Ketone)	1 kg	1. Refined Naphthalene	1.890 kg
			2. Acetyl Chloride	1.520 kg
			3. Methanol	1.355 kg
			4. Aluminium Chloride Anhydrous	2.622 kg
A3380	Hydrotreating-cum-Desulphurisation Catalyst Type: G-1 Catalyst Containing: Zinc oxide 85 +/-3% and Molybdenum trioxide 3.5+/-0.3%	1 kg	1. Zinc Metal	0.694 kg.
A3380		1 kg	2. Molybdenum trioxide	0.035 kg.
A3381	ABS Resin / Granules (Injection Moulding / Sheeting Grade)	1 MT	1. Styrene	639 kg
			2. Aqcrylonitrile	271 kg
			3. Butadiene	190 kg
			4. Oleic Acid or Distilled Fatty Acid	21 kg
			5. Teritary Dodecyl Mercaptan/ Normal Dodecyl Mercaptan	7 kg
			6. Potassium Persulphate	5 kg
			7. Disprosin / Rosin	25 kg
			8. Ethylene Bis-stearamide	25 kg
			9. Antioxidant (OBP/Sumilizer/ DTDTDP/DBP/ TNPP/BHT/ Irgonox-1076	31 kg
			10. Pigment/ Titanium Dioxide/Relevant Colour Master Batch	20 kg
			11. Stearic Acid	3 kg
			12. Palmitic Acid	2 kg
A3382	5 Aceto Acetyl Amino Benximidazolone OR (5-Aceto Acetyl Amino Benximidazolone-2)	1 kg	1. Acetic Acid	1.512 kg
			2. 5 Amino Benzimidozonlene	0.800 kg
			3. Triethyl Phosphate	0.005 kg
			4. Methanol	0.700 kg
			5. DABCO Crystalline (1,4, Diazo Bicyclo (2,2,2)-Octane	0.0015 kg
A3383	Transformer Oil (conforming to IEC 296 class I and class II / IEC60296)	1 Kg	1. TOBS (Viscosity 6 to 20 cst at 40ºc)	1.02 Kg
A3384	Transformer Oil high flash (Flashpoint 250º c min.)	1 Kg	1. Bright Stock Base Oil (Viscosity 30 ± 3cst at 100ºc)	0.11 Kg
A3384	Transformer Oil high flash (Flashpoint 250º c min.)	1 Kg	2. Base Oil (Viscosity 110 ± 20cst at 40ºc)	0.91 Kg
A3385	Light Liquid Paraffin/ Light white oil / Light Mineral Oil B.P./U.S.P	1 Kg	1. Base Oil (Viscosity at 40ºc 40 cst max.)	1.06 Kg
A3385		1 Kg	2. Isopropyl Alcohol	0.05 Kg
A3386	Liquid paraffin / Heavy white oil / Heavy mineral oil BP/USP (Other than covered in SION A-3385)	1 Kg	1. Base Oil (Viscosity at 40ºc 120 cst max.)	1.08 Kg
A3386		1 Kg	2. Isopropyl Alcohol	0.05 Kg
A3387	Light Liquid paraffin/Light white oil / Light mineral oil	1 Kg	1. Base Oil (Viscosity at 40ºc 40 cst max.)	1.02 Kg
A3388	Liquid paraffin/Heavy white oil /Heavy mineral oil (Other than covered under SION A-3387)	1 kg	1. Base Oil (Viscosity at 40ºc 120 cst max.)	1.03 kg

Annexure “C” to the
Public Notice No. 77
Dated: 26/08/2004

ENGINEERING PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1976	LT/HT Aerial Bunched Cables 1x25 + 25 SQMM	1 KM	1. Aluminium Ingot	68 Kg.
			2. XLPE Compound	26 Kg.
			3. Aluminium, Magnesium	68 Kg.
C1977	LT/HT Aerial Bunched Cables 3x25 + 1x25 SQMM	1 KM	1. Aluminium Ingot	208 Kg.
			2. XLPE Compound	80 Kg.
			3. Aluminium, Magnesium, Silicon Alloy Ingot.	68 Kg.
C1978	LT/HT Aerial Bunched Cables 3x50 + 1x35 SQMM	1 KM	1. Aluminium Ingot	383 Kg.
			2. XLPE Compound	133 Kg.
			3. Aluminium, Magnesium, Silicon Alloy Ingot.	93 Kg.
C1979	Power Entry Components without wire harness	1 No.	1. Brass Strip	1.30 Kg./Kg. content in export product
C1979	Power Entry Components without wire harness	1 No.	2. Nylon 6 Moulding Powder/Granules	1.05 Kg./Kg. content in export product
C1980	Electrical Aluminium Cutout	1 No.	1. Aluminium Alloy Ingots	1.02 Kg./Kg. content in export product
			2. Brass	1.05 Kg./Kg. content in export product
			3. Copper Wire Bar	1.01 Kg./Kg. content in export product
C1981	Silica Refractory Boards for Tundish / Ladle Lining	1 MT	1. Quartzite / Quartz Powder	1250 kg.
			2. Bonding Adhesive (Resin/Goulac)	75 kg.
			3. Filler (Boric Acid or Borax, Paper / Glass Fiber, Glass and Mineral Wool)	62.5 kg.
			4. Wooden Moulds	0.07 Nos.
C1982	Hydraulic Cylinder for earth moving equipments	1 No.	1. Seal Dust.	Net to net
			2. Packing Rod	Net to net
			3. Bushing	Net to net
			4. O-Ring	Net to net
			5. Ring, Back Up	Net to net
			6. Ring Piston	Net to net
			7. Ring Wear	Net to net
			8. Seal Dust	Net to net
			9. Nylon Nut	Net to net
			10. Nut	Net to net
			11. Bolt	Net to net
			12. Washer	Net to net
			13. Non alloy cold drawn seamless steel tube of relevant grade	1.1 Mtr./Mtr. Content in export product
			14. ERW Steel Tube	1.01 Mtr. / Mtr. Content in export product
C1983	ERW Steel Pipes / Tubes (Galvanised) ASTM Standard	1 kg	1. Hot rolled Carbon steel sheets / strips / plates / coils other than high carbon steel	0.9765 kgs.
C1983	ERW Steel Pipes / Tubes (Galvanised) ASTM Standard	1 kg	2. Zinc (In kgs)	As per Engg. Table no. 11.
Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11.
C1984	ERW Steel Pipes/ Tubes (Galvanised) other than ASTM Standards	1 kg	1. Hot rolled Carbon steel sheets / strips / plates / coils other than high carbon steel	0.9765 kgs.
C1984		1 kg	2. Zinc (in kgs)	As per Engg. Table No. 11
Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity of item 2 will be as per the Engg. Table No. 11.
C1985	Machined components for automotive application namely Sleeve / Bush	1 kg	1. Relevant Continuous Cast Tube of relevant sizes & specification	1.01 kg/kg content in the export product

ENGINEERING TABLE NO. 11

Export Item - ERW Steel Pipes / Tubes (Galvanised)

Sr. No.	Export Item Standard)	Pipe thickness
		1 mm and below	Above 1 mm to 2 mm	Above 2 mm to 3 mm	Above 3 mm to 4 mm	Above 4 mm to 5 mm	5 mm and above
1.	ASTM	0.14 kg	0.075 kg	0.055 kg	0.04 kg	0.035 kg	0.03 kg
2.	Other than ASTM Standard	0.10 kg	0.055 kg	0.04 kg	0.03 kg	0.025 kg	0.02 kg

Annexure “E” to the
Public Notice No. 77
Dated: 26/08/2004

TEXTILE PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
J362	Acrylic Grey Yarn (Under Worsted System)		1. Acrylic Fibre/Tow	1.10 Kg./Kg. content in the export product

Presented by eximkey.com

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password