Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl. No.A-3317, new entries at Sl. No. A-3318 to A-3332 shall be added as per Annexure ”B” to this Public Notice.
After the existing entry at Sl.No.C-1966, new entry at Sl.No.C-1967 shall be added as per Annexure “C” to this Public Notice.
After the existing entry at Sl.No.H-544, new entry at Sl.No.H-545 shall be added as per Annexure “D” to this Public Notice.
After the existing entry at Sl.No.J-358, new entry at Sl.No.J-359 shall be added as per Annexure “E” to this Public Notice.
After the existing entry at Sl.No.K-167, new entry at Sl.No.K-168 shall be added as per Annexure “F” to this Public Notice.
5. This issues in public interest.
( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE
(R. C. SAINI)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No. 62
Dated: 11/05/2004
| Sl.No. | Page No. | Reference | Amendments/Corrections |
|---|
| 1 | 2 | 3 | 4 |
|---|
| 1. | 164 -165 | Chemical & Allied Product Sl.No.A1324 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1324 | Dimethyl Sulphate | 1 kg | 1. Sulphur | 0.279 Kg |
OR
Yellow Crude Sulphur (Moisture content 3%) (Carbon 0.5%) Ash content: 0.03%) | 0.290 Kg |
| 2. | 189 | Chemical & Allied Product Sl.No.A1572 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A1572 | Paper such as Cyclostyled Paper, Typing Paper, Xerox Paper, Copier Paper Ruled/Unruled Paper, Plain Paper, Drawing sheets with one side not exceeding 435mm and the other side not exceeding 297 mm in the unfolded state | 1 kg | 1. Relevant Paper in Jumbo Rolls of relevant GSM | 1.05 kg/kg content in export |
| 3. | 320 | Chemical & Allied Product Sl.No.A2499 | The description of export product shall be amended to read as under:-
“Leather Finishing Transfer Foil” |
| 4. | 5 | Chemical & Allied Product Sl.No.A2833 (amended vide Public Notice No. 20 Dated:01/07/2002) | The description of export product shall be amended to read as under:-
“Glass Vials of various sizes” |
| 5. | 22 | Chemical & Allied Product Sl.No.A3095 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3095 | Sterile Ceftazidime/ Ceftazidime Pentahydrate USP | 1 kg | 1. T.A. E.M. | 1.573 Kg/Kg. |
OR
a) 2-(2-Amino Thiazole-4YL)2Hydroxyimino acetic Acid Ethyl Ester (ATH) | 1.15 Kg. |
| b) 2-Bromo isobutyric Acid Tert.Butyl Ester. | 1.28 Kg. |
| c) Triphenyl Phosphine. | 1.302 Kg. |
| d) Perkacit | 1.504 Kg. |
| 2. Acetone | 4.32 Kg. |
| 3. Hexamethyl Disilane | 1.707 Kg. |
| 4. Iodine | 2.50 Kg. |
| 5. Isopropyl Alcohol | 3.52 Kg. |
| 6. Methylene chloride | 2.23 Kg. |
| 7. Methanol | 2.216 Kg. |
| 8. Pyridine | 1.89 Kg. |
| 9. Activated Carbon | 0.071 Kg. |
| 10. Sterile sodium Carbonate/Potassium Carbonate | 0.093 Kg. |
| 11. Triethyl Amine | 0.069 Kg. |
| 12. Formic Acid (98%) | 3.70 Kg. |
| 13. Formic Acid (85%) | 0.211 Kg. |
| 14. Caustic Soda | 4.302 Kg. |
| 15. 7-ACA | 1.08 Kg. |
| 16. Amberlite-LA-2-Resin | 0.45 Kg. |
| 17. Dimethyl Formamide | 1.84 Kg. |
| 6. | 35 | Chemical & Allied Product Sl.No.A3161 (amended vide Public Notice No. 03 Dated:31/03/2003) | The description of export item shall be amended to read as under:-
“Perfumed Candles in Terracotta Pot/Glass container of different shapes and sizes” |
| 7. | 15 - 17 | Chemical & Allied Product Sl.No.A3178 (amended vide Public Notice No.10 Dated:30.05.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3178 | U.V. Flush Colour-Magenta containing 30%+1% Pigment and 60%+/-1% Polyester Acrylate / Acrylic Acrylate/ Urethene Acrylate / Epoxy Acrylate | 1000 kgs. | 1. Pigment Magenta/ Rubine (Pigment Red 57:1) | 306 kgs |
OR
1. Raw material for Pigment Rubine/ Magenta (Pigment Red 57:1):
a) 4-B Acid (p-toluidine o-Sulphonic acid or 6 Amino Meta Toluene Sulphonic Acid or 2-Amino 5-Methyl Benzene Sulfonic Acid) | 137.7 kgs |
| b) Bon Acid | 142.902 kgs |
| c) Sodium Nitrite | 52.02 kgs |
| d) Sulphamic Acid | 1.53 kgs |
| e) Caustic Soda | 115.668 kgs |
| f) Rosin | 41.616 kgs |
| g) Calcium Chloride | 25.09 kgs |
| 2. Polyester Acrylate | 612 kgs |
OR
2. Acrylic Acrylate | 612 kgs |
OR
2. Urethene Acrylate | 612 kgs |
OR
2. Epoxy Acrylate | 612 kgs |
OR
2. Raw material for Epoxy Acrylate: -
a) Epoxy Resin | 330.48 kgs |
| b) Acrylic Acid | 129.744 kgs |
| c) Mono Ethyl Hydro Quinone | 3.060 kgs |
| d) Benzyl Dimethyl Amine | 6.120 kgs. |
| e) Relevant Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hex Acrylate | 153.00 kgs |
| 3. Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hex Acrylate | 86.70 kgs |
| 4. U.V. Inhibitor namely Phenothiazine/ Flourostab | 15.30 kgs |
| 8. | 24 | Chemical & Allied Product Sl.No.A3187 (amended vide Public Notice No.10 Dated:30.05.2003) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3187 | U.V. Flush Colour-various colours containing 30% +/-1% Pigment and 60%+/-1% Polyester Acrylate/ Acrylic Acrylate/ Urethene Acrylate/ Epoxy Acrylate | 1000 kgs. | 1. Relevant Pigment | 306 kgs |
| 2. Polyester Acrylate | 612 kgs |
OR
2. Acrylic Acrylate | 612 kgs |
OR
2. Urethene Acrylate | 612 kgs |
OR
2. Epoxy Acrylate | 612 kgs |
OR
2. Raw material for Epoxy Acrylate: -
a) Epoxy Resin | 330.48 kgs |
| b) Acrylic Acid | 129.744 kgs |
| c) Mono Ethyl Hydro Quinone | 3.060 kg |
| d) Benzyl Dimethyl Amine | 6.120 kgs |
| e) Relevant Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hex Acrylate | 153.00 kgs |
| 3. Reactive Monomers namely Tri Propylene Glycol Diacrylate/ Tri Methylol Propane Tri Acrylate/ Ethoxylated Tri Methylol Propane Tri Acrylate/ Di Pentaerythritol Hex Acrylate | 86.70 kgs |
| 4. U.V. Inhibitor namely Phenothiazine/ Flourostab | 15.30 kgs |
| 9. | 19 | Chemical & Allied Product Sl.No.A3239 (amended vide Public Notice No.23 Dated:10/09/2003) | The description of export item shall be amended to read as under:-
“Xanthanoic Acid OR Xanthalene 9-Carboxlic Acid” |
| 10. | 8 | Engineering Product Sl.No.C206 (amended vide Public Notice No. 20 Dated:01/08/2003) | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Copper Rods/Copper Wire Rods (EC Grade)/Continuous Cast Copper Rods/ Copper Cathodes” |
| 11. | 572 | Engineering Product Sl.No.C440 | Quantity of import items at Sl. Nos.1, shall be amended to read as under:-
“1.02 kg/kg content in export product” |
| 12. | 617 | Engineering Product Sl.No.C528 | The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-
“Non-Alloy Steel Wire Rod” |
| 13. | 11-12 | Engineering Product Sl.No.C548 (notified vide Public Notice No. 27 Dated:06/10/2003) | The description of import item at Sl. No. 14 & 16, (without any change in quantity) shall be amended to read as under:-
“14. Aluminium Sheet / Foil
16. Freon Gas” |
| 14. | 747 | Engineering Product Sl.No.C1299 | 1. The description of export item shall be amended to read as under:-
“Band Saw Segments / Band Saw in Coil made from Carbon Steel/ Bimetal Steel”
2. The description of import item at Sl. No.1, (without any change in quantity) shall be amended to read as under:-
“1.Relevant CR Steel/Bimetal Steel/ Strip/ Wide Coil” |
| 15. | 826 | Engineering Product Sl.No.C1552 | The norm covered by this entry shall be deleted. |
| 16. | 868 | Engineering Product Sl.No.C1729 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| C1729 | Silica Bricks / Shapes for Glass Melting Furnaces | 1 MT | 1. Quartzite | 1570 Kg |
| 2. Hydrated Lime | 79 Kg |
| 3. Silicon Carbide Powder | 20 Kg |
OR
3. Silicon Metal Powder | 15 Kg |
| 4. Dextrine | 20 Kg |
OR
4. Gaulac | 9 Kg |
| 5. (a) Alloy Steel Mould | 0.03 No |
| 5. (b) Wooden Mould | 0.01 No |
| 17. | 27 | Engineering Product Sl.No.C1789 (amended vide Public Notice No. 20 Dated:01/07/2002) | The description of export item shall be amend to read as under:-
“Vertical and/or Horizontal Pressure Leaf Filter with Accessories” |
| 18. | 12 | Plastics Product Sl.No.H18 (amended vide Public Notice No.27 dated:01/08/2002) | The description of import items at Sl. Nos. 5 & 6, (with quantity) shall be corrected to read as under:- |
| “5. Photo Polymers Relief Images Plates | 1 No. per colour in the design |
| 6. Printers Rubber Blankets Thickness 1.9 mm +/-5% | 0.006 Sq. Mtr. per 28 packs of PVC Playing Cards” |
| 19. | 12 - 13 | Plastics Product Sl.No.H331 (amended vide Public Notice No. 46 Dated:06.11.2002) | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| H331 | Tooth Brushes | 1 kg | 1. (a) Relevant Polymer for Tooth Brush Handle | 1.05 kg/kg content in the export product |
OR
(b) Relevant Tooth Brush Handles | Net + 2% wastage |
| 2. Relevant nylon 6/66/ 612/610 Monofilament | 1.05 kg/kg content in the export product |
| 3. Relevant Aluminium / Nickel / Nickel-Silver Wire/ Brasswire | 1.01 kg/kg content in the export product |
| 20. | 921 | GENERAL NOTE FOR LEATHER AND LEATHER PRODUCTS | After the general note for Leather & Leather Products, the following General Note shall be added:-
Note: 8. For export of Dual Density (PU/TPU) Soles to be used as Component for Various Types of Footwear, the following import items (with quantities) may be allowed:
| Import item | Qty. required for per kg. PU/TPU Soles | | 1. Polyol | 230gms. | | 2. Isocynate | 270gms | | 3. Thermoplastic Urethane (TPU) | 460gms | | 4. Catalyst | 50gms. | | 5. Pigment Paste | 30gms | | 6. Release Agent | 45gms. |
|
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
| A3318 | Meta Dichloro Benzene | 1 kg | 1. Meta Dinitro Benzene | 1.42 Kg |
| A3319 | Nitrile Butadine Rubber with Bound Acrylonitrile content 33 + /-1% | 1 MT | 1. Acrylonitrile | 363 Kg |
| 2. 1,3, Butadiene | 737 Kg |
| 3. Antioxidant | 23.48 Kg |
| 4. Emulsifier | 54.06 Kg |
| 5. Chain Modifier | 13.48 Kg |
| 6. ChainTerminating Agent | 9.10 Kg |
| 7. Defoamer | 4.03 Kg |
| 8. Inhibitor | 0.27 Kg |
| 9. Coagulant | 33.03 Kg |
Note: 1. The above norms are based on the Bound Acrylonitrile Content of 33+/-1% in the NBR to be exported. Thus , Butadiene content in the NBR will be 67+/-1%.
Note: 2. In case of variation in Bound Acrylonitrile Content the entitlement of import of Acrylonitrile and Butadiene may be worked out on pro-rata basis. |
| A3320 | 2- Methyl Cyclohexanol | 1 kg | 1. Ortho Cresol | 1.007 Kg |
| A3321 | Sodium salt of Mercapto Benzothiazole 50% w/w Aqueous solution | 1 kg | 1. Aniline | 0.272 Kg |
| 2. Carbon Disulphide | 0.208 Kg |
| 3. Molten Sulphur | 0.090 Kg |
| 4. Caustic Soda | 0.107 Kg |
| 5. Ortho Xylene | 0.002 Kg |
| A3322 | (N-Phenyl-N’-(1-Methylheptyl) p-phenylenediamine | 1 kg | 1. Para Amino diphenyl Amine | 0.625Kg. |
| 2. Methyl Hexyl Ketone | 0.476Kg. |
| A3323 | Phosphorous Sulphochloride | 1 kg | 1. Phosphorous Trichloride | 0.827Kg. |
| 2. Sulphur | 0.190Kg. |
| A3324 | High density Polyethylene (HDPE) | 1 MT | 1. Propane | 1437 kg |
| 2. Cyclohexane | 15 kg |
| 3. Catalyst | 0.46 kg |
| 4. Deactivator | 2.88 kg |
| 5. Alumina | 13.5 kg |
| 6. Anti-oxidant | 2.4 kg |
| A3325 | Linear Low Density Polyethylene (LLDPE) | 1 MT | 1. Propane | 1441 kg |
| 2. Cyclohexane | 15 kg |
| 3. Catalyst | 0.46 kg |
| 4. Deactivator | 2.88 kg |
| 5. Alumina | 13.5 kg |
| 6. Anti-oxidant | 2.4 kg |
| A3326 | Succinic Anhydride | 1 kg | 1. Maleic Anhydride | 1.037 kg. |
| 2. Nickel Catalyst | 0.001 kg |
| A3327 | Glucosamine Hydrochloride | 1 kg | 1. Chitin | 2.07 kg |
| 2. Methyl Iso Butyl Ketone | 1.19 kg |
| 3. Acetone | 0.76 kg |
| A3328 | Glucosamine Sulphate Potassium Chloride (containing Glucosamine Chloride 80% and Potassium Sulphate 20%) | 1 kg | 1. Chitin | 1.656 kg |
| 2. Methyl Iso Butyl Ketone | 0.952 kg |
| 3. Acetone | 0.608 kg |
| A3329 | Diminazene Diaceturate | 1 kg | 1. Acetic Acid | 2.70 kg. |
| 2. Acetone | 3.60 kg. |
| 3. Caustic Flakes | 1.50 kg. |
OR
Caustic Lye 48% | 3.12 kg. |
| 4. Dimethyl formamide | 0.90 kg. |
| 5. Glycine | 0.66 kg. |
| 6. Hydroxyl Amine Sulphate | 1.88 kg. |
| 7. Methanol | 25.80 kg. |
| 8. Para Nitro Benzoic Acid | 1.63 kg. |
| 9. Thionyl Chloride | 1.20 kg. |
| 10. Toluene | 1.71 kg. |
| 11. Teter Hydro Furan | 1.50 kg. |
| 12. Iso Propyl alcohol | 2.88 kg. |
| A3330 | Lysol BP (Mixture of Cresol BP & Castor Oil Soap) Specific gravity -0.96-0.97 at 30 Degree Centigrade Cresol content 50% V/V | 1 kg | 1. Mixed Cresol (Specific gravity =1.05) | 0.600 kg. |
| A3331 | Ethambutol HCL BP/USP | 1 kg | 1. DL-2-Aminobutanol | 1.75 kg. |
| 2. Monosodium Glutamate | 0.90 kg. |
| 3. Isopropanol alcohol | 2.00 kg. |
| 4. Toluene | 0.90 kg. |
| 5. Sodium Hydroxide | 1.42 kg. |
| A3332 | Magnesium Aluminate Spinel (containing Alumina and Magnesium Oxide) | 1 kg | 1. Magnesium Calcined | 1.12 kg./per kg magnesium oxide content in export product. |
| 2. Alumina Calcined | 1.15 kg./per kg Alumina content in export product |
| 3. Dextrin | 0.019 kg. |
| 4. Cemgrind (mixture of high boiling alkanolamines) | 0.105 gms |
| Note : Net content of Alumina and Magnisium Oxide in export item shall be declared and input quantity shall be worked out based on the net contents |