Eximkey - India Export Import Policy 2004 2013 Exim Policy
DGFT Notification, Circulars... Public Notices Public Notices w.e.f 01/04/2002 PUBLIC NOTICE NO. 52(RE-02), DT. 05/12/2002
PUBLIC NOTICE NO. 52(RE-02)/2002-2007, Dt. 05/12/2002

Amendments/ Addition in SION

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-3109, new entries at Sl. No. A-3110 to A-3117 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1825, new entries at Sl.No.C-1826 to C-1841 shall be added as per Annexure ”C” to this Public Notice.

PLASTICS GOODS

After the existing entry at Sl.No.H-512, new entries at Sl. No. H-513 to H-516 shall be added as per Annexure ”D” to this Public Notice.

SPORTS GOODS

After the existing entry at Sl.No.I-41, new entries at Sl. No. I-42 to I-47 shall be added as per Annexure ”E” to this Public Notice.

This issues in public interest.

( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE

(R. C. SAINI)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE

Annexure “A” to the
Public Notice No. 52
Dated: 05/12/2002

AMENDMENTS/CORRECTIONS


Sl. No. Page No. Reference Amendments/Corrections
1 2 3 4
1. 147 Chemicals & Allied Products Sl.No.A1062 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A1062 1 Hydroxyethylidene 1:1 Di Phosphoric Acid 60% 1 kg 1. Phosphorous Trichloride 0.828 kg
OR

Yellow Phosphorous
0.189 kg
Chlorine 0.654 kg
2. Acetic Acid Galcial 0.182 kg
2. 156 Chemicals & Allied Products Sl.No.A1204 The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“Phenol”
3. 159 Chemicals & Allied Products Sl.No.A1242 The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“Denatured Ethyl Alcohol”
4. 169 Chemicals & Allied Products Sl.No.A1385 The description of export item shall be amended to read as under:-

“Methyl Amino Propyl Amine / 3 Methyl Amino Propyl Amine”
5. 172 Chemicals & Allied Products Sl.No.A1419 1. The description of export item shall be corrected to read as under:-

“N- (1, 3 Dimethyl Butyl)-N- Phenyl-P- Phenylene Diamine”

2. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-

“Para Amino Diphenyl Amine”
6. 177 Chemicals & Allied Products Sl.No.A1476 The description of import item Ethyl Alcohol appearing at Sl. No. 2, (without any change in quantity) shall be amended to read as:-

“Denatured Ethyl Alcohol”
7. 191 Chemicals & Allied Products Sl.No.A1598 The description of export item shall be corrected by the following:-

“Amino Trimethylene Phosphonic Acid (50%strength)”
8. 269 Chemicals & Allied Products Sl.No.A2111 The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as:-

“Refined Naphthalene”
9. 289-290 Chemicals & Allied Products Sl.No.A2263 The description of import item at Sl. No. 13, (with quantity) shall be amended to read as under:-
“Isopropyl Alcohol/ Ethyl Acetate/Absolute Alcohol” 12.37 kg/kg
10. 312 Chemicals & Allied Products Sl.No.A2439 The description of import item at Sl. No. 1(a), (without any change in quantity) shall be amended to read as:-

“Denatured Ethyl Alcohol”
11. 332 Chemicals & Allied Products Sl.No.A2605 The description of export product shall be amended to read as under:-

“Imazethapyr 5% SL (Pursuit 50A)”
12. 340 Chemicals & Allied Products Sl.No.A2686 The norm covered by this entry shall be re-stored by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A2686 Dimethyl Amine Hydrochloride 1 kg 1. Methanol 0.868 kg
13. 342 Chemicals & Allied Products Sl.No.A2699 The description of import item at Sl. No. 1, shall be amended to read as:-

“Refined Naphthalene”
14. 345 Chemicals & Allied Products Sl.No.A2724 The norm covered by this entry shall be deleted.
15. 367 Chemicals & Allied Products Sl.No.A2905 The description of export item shall be amended to read as under:-

“2,6 Di-tertiary Butyl Paracresol (Butylated Hydroxy Toluene)”
16. 22 Chemicals & Allied Products Sl.No.A3095 (notified vide Public Notice No. 46 Dated:06/11/2002) The description of export item shall be amended to read as under:-

“Sterile Ceftazidime/ Ceftazidime Pentahydrate USP”
17. 479 Engineering Product Sl.No.C2 The description of import item at Sl. No. 1(a), (with quantity) shall be substituted by the following:-

“OR

1a) Aluminium Ingot/T Bars/Sows/Billets
1.04 kg
OR

a) Aluminium Scrap
1.05 kg
18. 481-482 Engineering Product Sl.No.C22 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C22 Table, Kitchen & other house hold articles made of aluminium including anodized with or without handle irrespective of what material handle are made of (other than those covered under SION at C-1749 1 kg 1. Aluminium Scrap 1.22 kg/kg content of Aluminium in export product
2. Aluminium Ingot 1.18 kg/kg content of Aluminium in export product
3. Aluminium Sheet/ Coils 1.15 kg/kg content of Aluminium in export product
4. Aluminium Circle 1.07 kg/kg content of Aluminium in export product
19. 541 Engineering Product Sl.No.C303, C304, C305, C306 & C307 The norms covered by these entries shall be deleted.
20. 572-576 Engineering Product Sl.No.C446 After the description of import item at Sl. No. 96, the following additional import items (with quantity) shall be added:-
“97.Sensors Net to net
98. linear Transducer /VDO Pressure Transducer net to net
99. Thrust Ball Bearing Spherical Roller Bearings, Bush Bearing, Wheel Flange Rollers etc. Net to net
100. Various Switches such as Rotary Net to net
101. Drive such as Converters Net to net
102. Non Alloy Round Stock/ Bar 1.05 kg/kg content in Export Product
103.Steel Pipe 1.02 kg/kg content in Export Product
104.Hydraulic Cylinder Net to net
105. Band Heters Net to net
106. Various Types of Seal Kits Net to net
107. PVC Tubing 1.02 kg/kg content in Export Product
108. Water Filter - cum - Regulator Assy Net to net
109. Cam Follower/ Roller Net to net
110. Thread Guide Net to net
111. S.S. Filter Belts Net to net
112. Coil Net to net
113. Encoder/Encoder Cables Net to net
114. Flow Meter Net to net
115. Servo Valve Assembly/ Actuator Net to net
116. Various machined Mechanical Parts Net to net
117. Control Panels Net to net
118. Extruder Screw Net to net
119. Extruder Barrel Net to net
120. Air Compressor Net to net
121. Filter Elements/ Suction Filters Net to net
122. Pressure Gauge/ Indicator/Oil Gauge Net to net
123. ’O’ Rings Net to net
124. Thermo Meters/Bi Metal Thermo Meter Net to net
125. Terminal Blocks Net to net
126. Hose Union Net to net
127. Universal Elbow/ Joint Net to net
128. Accumulator Net to net
129. Scrapper Net to net
130. Programmer Net to net
131. High/Low Pressure Elements Net to net
132. MMC Units Net to net
133. Motor Protection Controller Net to net
134. Programmable Logic Controller Net to net
21. 579-580 Engineering Product Sl.No.C459 The description of export item shall be amended to read as under:-

“Alloy Steel (other than Stainless Steel and High speed steel), Bars and Rods (Including Rounds, Flats, Hexagons, Octagon, Wire Rods etc.) Angles, Shapes and sections (including Special Profiles) Plate / Sheets / Strips / Wide Coils / Blooms / Billets / Slabs / Ingots containing 2% or more alloying elements.”
22. 585 Engineering Product Sl.No.C469 The description of export item shall be amended to read as under:-

“Cold Rolled Galvanised Colour Coated Non-Alloy Steel Sheets / Hoopand Strips / wide coils having zinc coating of 180 gm per Sq.m @ 40 Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq. Mtr. Per litr. as Backer given in Engineering Table 1”
23. 585-586 Engineering Product Sl.No.C470 The description of export item shall be amended to read as under:-

“Cold Rolled Full Hard / Cold Rolled Close Annealed (without skin passed/ temper passed) Non-Alloy/ Alloy Steel (excluding Stainless Steel ) Sheets/ Hoops & Strips / Wide Coils”
24. 586 Engineering Product Sl.No.C471 The description of export item shall be amended to read as under:-

“Cold Rolled Close annealed (CRCA) Skin passed / Temper passed (Including Half Hard, Quarter Hard) Non-Alloy / Alloy Steel (excluding Stainless Steel) Sheets/ Hoop & Strips / Wide Coils”
25. 601-603 Engineering Product Sl.No.C511 The description of export item shall be amended to read as under:-

“Non-alloy / Alloy / Stainless Steel bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire Rod, Cold twisted deformed bars, thermo-mechanically treated reinforcing bars etc.) Angles, Shapes and sections (including Beams, Joists, Channels Special profiles etc.), Plates / Sheets /Strips/ Wide coil / Blooms / Billets/ Slabs and Ingots”
26. 614-616 Engineering Product Sl.No.C525 The description of export item shall be amended to read as under:-

“Stainless Steel bars and Rods (including Rounds, Flats Hexagons, Otagons, wire rods, etc.) Angles, Shapes and sections (including beams, Joists, Channels, special profiles, etc.), Plates / Sheets / Strips/ wide coils/ Blooms/ Billets/ slabs/ Ingots in any condition/ finish whether cast, hot rolled/ cold rolled, forged or cold finished/ cold drawn”
27. 617 Engineering Product Sl.No.C527 1. the description of import item at Sl. No. 7(a) (without any change in quantity) shall be amended to read as under:-

“7(a). Used / New Plastic / Steel Bobbins / Spools”

2. In the Note No. 1, the words appearing as “below 1 mm only” shall be substituted by the following:-

“below 1.6 mm only”
28. 626 Engineering Product Sl.No.C601 The description of import item at Sl. No. 1, shall be amended (without any change in quantity) to read as under:-

“Cold Rolled Non-alloy Steel Sheet/Strip/Wire Coils (prime seconds / defectives)”
29. 657 Engineering Product Sl.No.C829 The Note No. 1, below this entry shall be added:-

“Note: 1. Import of handle may also be allowed on net to net basis with accountability clause where the product is exported alongwith the handle”
30. 838 Engineering Product Sl.No.C1630 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1630 Galvanised Steel Flexible Tube / Pipe (conduit) with PVC coating 1 kg 1. Low carbon MS defective coils/ Sheets 1 kg/kg content in the export product
2. Zinc 0.025 kg content in the export product
3. PVC compound (granules) 1.05 kg/kg content in the export ptoduct
31. 841 Engineering Product Sl.No.C1645 The description of import items shall be amended (with quantity) to read as under:-
“1. For Export item No. 1
i) Gear Box 1 No
ii) Front Axle 1 No.
iii)View for Oil Level 1 No.
iv ) Plug 1 No.
v) Distributor Valve and handle Net to net
0. For Export Item No. 2
i) Gear Box 1 No
ii) Front Axle 1 No.
iii)View for Oil Level 1 No.
iv ) Plug 1 No.
v) Distributor Valve and Handle Net to net
0. For Export Item No. 3
i) Gear Box 1 No
ii) Front Axle 1 No.
iii)View for Oil Level 1 No.
iv ) Plug 1 No.
v) Distributor Valve and Handle Net to net
vi) Hyd. Motor 1 No.
vii)Control Valve 1 No.”
32. 861 Engineering Product Sl.No.C1698 In the description of import item at Sl. No. 1, the following alternative import items (with quantity) shall be added:-
“OR

“1(a) Aluminium Ingot
1.10 kg/kg content in the export product
1(b) Relevant alloying elements such as silicon metal, manganese metal, magnesium metal etc.” 1.10 kg/kg content in the export product
33. 23 Engineering Product Sl.No.C1780 (as amended vide Public Notice No.20 Dated:01.07.2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1780 Magnet Retrieving 1 No. 1. Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Component in relevant dimensions Net to net
OR

1. Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Raw Material
1.02 kg/kg content of Magnet in the export product
34. 23 Engineering Product Sl.No.C1781 (as amended vide Public Notice No.20 Dated:01.07.2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1781 Magnetic Tray 1 No. 1. Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Component in relevant dimensions Net to net
OR

Permanent Magnet Strontium Ferrite Grade in demagnetized condition as Raw Material
1.02 kg/kg content of Magnet in the export product
35. 25 Engineering Product Sl.No.C1786 (amended vide Public Notice No.20 Dated:01.07.2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1786 Steel Rolls for Cold Rolling Mill (2-Hi, 4-Hi, 6-Hi) 1 kg 1. Alloy Tool Steel Round Bar conforming to AISI D3/D2 1.40 kg.
36. v of HBP (VOL-II) PART-II GENERAL NOTE FOR FUELIn the “General Note for Fuel” the description of the product group against Sl. No. 9 shall be amended to read as under:-

“9. Non-ferrous basic metals (including down-stream products of aluminium)”
37. 1 (Corrected vide Public Notice No.36 Dated:17/09/2002 ) The word “Raw” appearing in the subject heading and in the first paragraph of the said Public Notice shall be deleted.


Annexure “B” to the
Public Notice No. 52
Dated: 05/12/2002

CHEMICALS AND ALLIED PRODUCTS


Sl.No. Export Item Qty. Import Item Qty. Allowed
A3110 Para Hydroxy Benzo Phenone 1 kg 1. Benzoyl Chloride 1.220 kg
2. Phenol 0.940 kg
3. Aluminium Chloride (Anhydrous) 1.682 kg
4. Dichloro Ethane (Ethylene Dichloride) 4.4 kg
5. Caustic Soda Flakes 2.00 kg
6. Methanol 9.00 kg
A3111 Nipacide C1 15 (Containing Chloro Methyl Isothiozolinone content 1.4% min.) 1 kg 1. Chloro Methyl Isothiozolinone (10.2%) 0.138 kg
A3112 Timber Touch (1-(2,2,6-Trimethyl Cyclohexyl)-Hexan-3-o1) 1 kg 1. Citral (min. Purity 95%) 1.865 kg
2. Methyl Propyl Ketone 1.500 kg
A3113 Ortho Cresol 1 kg 1. Phenol 0.915 kg
2. Methanol 0.312 kg
A3114 Phenyl-Alpha (2 Pyridyl) Acetone Nitrile 1 kg 1. 2 Chloro Pyridine 0.78 kg
2. Sodium Hydride 0.18 kg
A3115 Synthetic tanning agent Ammonium Salt of Phenol, Cresol Sulfonic Acid, Polymerized with urea and formaldehyde (Active content 40.5-41%) 1 kg 1. Phenol 0.132 kg
2. Cresol 0.070 kg
A3116 Venetian Glass Beads Loose, Glass Beads in Strings, Bracelets, Rosaries, Necklaces 1 kg 1. Glass Beads/ 1.05 kg/kg content of export
Metal Beads 1.03 kg/kg content of export
OR

Block Glass /Plain Glass Rods/ Millifeori Glass Rods/ Venetian Glass Rods
1.20 kg/kg content of export
2. Metal Locks 1.03 kg/kg content of export
3. Metal Findings 1.03 kg/kg content of export
4. PVC Coated Steel Wire 1.05 kg/kg content of export
A3117 Wax Crayons-Containing Paraffin wax not less than 24% and Stearic Acid not less than 74% 1 kg 1. Paraffin Wax 0.252 kg
2. Stearic Acid 0.740 kg
3. Organic Pigments 0.021 kg


Annexure “C” to the
Public Notice No. 52
Dated: 05/12/2002

ENGINEERING PRODUCTS


Sl.No. Export Item Qty. Import Item Qty. Allowed
C1826 LPG Storage Bullets / Tanks 1 No. 1. B.Q. Plates 1.05 kg/kg content in export product
C1827 Kerosene Wick Stove and its parts 1 No. 1. CRCA Non Alloy Steel Sheet 1.10 kg/kg content in the export product
2. Nickel Anode 0.97% of the weight of components to be nickel plated
3. Paper Board for corrugated boxes As per Packing Policy
C1828 Radiators for transformer made of stainless steel 1 No. 1. Stainless Steel Sheet/Coils 1.05 kg/kg content in the export product
Note : In the case of coated / painted radiator, whether internally or externally coated, relevant coating / painting material may be allowed on actual requirement basis upto to 4% of the FOB value of exports
C1829 Evaporative Air Cooler 1 No. 1. ABS 1.05 kg/ kg content in the export product
2. PVC Compound 1.05 kg/ kg content in the export product
3. Nitrile Rubber compound 1.05 kg/ kg content in the export product
4. Relevant Gear Motor/ Swing Motor 1 No.
5. Relevant main Motor 1 No.
6. Relevant Pump Motor Net to net
7. Adhesive Cif value restricted to 1% of the FOB value
8. Cellulose impregnated corrugated paper cartons 1 kg/ kg content in the export product
C1830 Hot Rolled Non-alloy Steel Strips/Slit Coils in pickled and oiled condition 1 kg 1. Hot Rolled Non-alloy Steel Wide Coils in un-pickled and un-oiled condition 1.02 kg
C1831 Aluminium Pressure Cooker 1 No. 1. Aluminium Alloy circles (commercial grade) 1.03 kg/kg content in the export product
C1832 Chrome / Nickle Plated Wire Wheel for all types of card 1 No. 1. HR Sheet for Rim 1.19 kg/kg in the export product
2. Billets for shell 2.5 kg/ kg in the export product
3. Wire for spokes 1.07 kg/kg in the export product
4. Nipple wire 1.42 kg/kg in the export product
5. Nickel 0.03 kg/No. of the export product
6. Sealant 0.03 kg/No. of the export product
7. Brightener 0.15 kg/No. of export product
8. Plating Chemicals cif value limited upto 3% of the FOB value
C1833 Silane Treated Glass Fabric / Cloth 1 kg 1. Glass Fibre / Glass Filament Yarn 1.10 kg
2. Polyvinyl Alcohol 0.02 kg
3. Silane 0.003 kg
C1834 Telephone Cable of relevant size (pairs) having copper conductor-0.5 mm dia 1 Km As per Engineering Table No. 9(1)
C1835 Telephone Cable of relevant size (pairs) having copper conductor-0.65 mm dia 1 Km As per Engineering Table No. 9(2)
C1836 Telephone Cable of relevant size (pairs) having copper conductor-0.90 mm dia 1 Km As per Engineering Table No. 9(3)
C1837 D. C. Motors 1 No. 1. Relevant Cold Rolled Steel Sheet/ Strip/Wide Coil 1.37 kg/kg content in the export product
2. CRNGO Steel Sheet/ Strip/ Wide Coil 1.60 kg/kg content in the export product
3. Trivolthrem/ Triflixel (Nomex / Polyester Film/ Nomex) 1 kg/ kg content in the export product
4. Copper Wire (Square) Bar/Rod 1.05 kg/ kg content in the export product
5. M.S. Plate 1.05 kg/kg content in the export product
6. Forging Net to net
7. Brass Brush Holder Net to net
8. Nomex Aramid Paper Net to net
9. Bearings 6230 C3/ NU / 230 ECJ/C3 Net to net
10. Resigiss Banding Tape Net to net
11. Name Plates Net to net
C1838 Master Cylinder Assy. 1 No. 1. Aluminium Alloy Ingot 1.12 kg/kg content of Aluminium Alloy in export product
2. Circlip Net to net
3. Seal Net to net
4. ‘O’ Ring Net to net
5. Plug Protective Net to net
6. Plug Protective Net to net
7. Plunger Primary Net to net
8. Seal Net to net
9. Pin Net to net
10. Poppet Net to net
11. Seal Net to net
12. Secondary Plunger Net to net
13. Sleeve Net to net
14. Spring Net to net
15. Seal Net to net
16. Spring Net to net
17. Retainer Net to net
C1839 Steel trunks (in CKD and SKD condition), with accessories/ fittings/ hardwares, such as, hasps, staples, corners, handles, slips, Knobs fittings side flaps and flats 1 kg 1. Carbon Steel / Mild Steel / all seconds grades/ defectives/ cuttings/ prime sheets/ coils/ strips 1.25 kg/kg content in the export product
OR

1. Tin plate waste/ waste
1.25 kg/kg content in the export product
2. Bronze powder 0.070 kg/kg of export product
3. Suitcase locks, metal fittings including combination locks Net to net with accountability in the export product
C1840 Marsh Geophone Strings consisting of 12 SM-24 Basic Elements 1 No. 1. Basic Element SM-24 12 Nos.
C1841 Marsh Geophone Strings consisting of 12 SM-24 Basic Elements (LD) 1 No. 2. Basic Element SM-24 12 Nos.


ENGINEERING TABLE-9 (1)



EXPORT ITEM - TELEPHONE CABLE (LENGTH - ONE KM.) OF RELEVANT SIZE(PAIRS) HAVING
COPPER CONDUCTOR-0.50 MM DIA


Cable size (Pairs) 1200 1000 900 800 600 400 300 200 150 100 70 50 30 20 10 5
Copper conductor Dia(mm) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
IMPORT ITEMS (WITH QUANTITIES IN Kgs.)                
1.Copper4231.7563526.4633173.8172821.172115.8781410.5851057.939705.2926528.9694352.6463246.8524176.3231105.793970.5292635.2646317.63231
2.HDPE2416.1782013.4821812.1341610.7861208.089805.3928604.0446402.6964302.0223201.3482140.9437100.674160.4044640.2696420.1348210.06741
3.Filling Jelly1328.0831357.9291187.493933.1449720.2243433.8454313.3903284.8938166.7236151.307998.8631492.3655651.8806656.4860824.5337110.83703
4.Flooding jelly42.9554140.6705538.3856935.4153730.8456424.7907621.3634618.4502615.3085813.252210.967349.8249087.5400466.968834.7982113.341611
5.Poly Foil stock22.3239521.1317519.9395518.3896916.0052912.8459611.057669.5376047.8983286.8253485.6331475.0370473.8448473.5467962.4142061.654178
6.Al Foil stock129.767122.8368115.9067106.897593.0372174.6723264.277155.4411745.9122239.6750932.7449429.2798722.3497220.6171814.033559.615578
7.LDPE727.1546690.3367653.5187521.7104457.8926343.1433298.9618238.2735201.1488159.5445134.9992122.726598.1812292.0448968.7268534.5782


ENGINEERING TABLE-9 (2)



EXPORT ITEM - TELEPHONE CABLE (LENGTH - ONE KM.) OF RELEVANT SIZE(PAIRS) HAVING COPPER
CONDUCTOR-0.65 MM DIA


Cable size (Pairs) 900 600 400 200 100 70 20 10
Copper conductor Dia(mm) 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65
IMPORT ITEMS (WITH QUANTITIES IN Kgs.)         
1.Copper 5363.75 3575.833 2383.889 1191.944 595.9722 417.1806 119.1944 59.59722
2.HDPE 2319.531 1546.354 1030.903 515.4514 257.7257 180.408 51.54514 25.77257
3.Filling

4.Jelly
1970.915 1205.986 707.5148 468.8895 279.7171 164.2673 24.78362 8.025579
5.Flooding Jelly 46.38271 37.24326 29.70321 22.27741 16.45101 13.2522 6.397615 4.341239
6.Poly Foil stock 24.11225 19.34345 15.40919 11.53454 8.494428 6.825348 3.248746 2.175766
7.Al Foil stock 140.1622 112.4416 89.57214 67.04916 49.37729 39.67509 18.88465 12.64752
8.LDPE 782.3816 635.1097 441.9382 338.2343 214.6487 159.5445 85.90856 56.33147


ENGINEERING TABLE-9 (3)



EXPORT ITEM - TELEPHONE CABLE (LENGTH - ONE KM.) OF RELEVANT SIZE(PAIRS)

HAVING COPPER CONDUCTOR-0.90 MM DIA


Cable size (Pairs) 20 50 30 70 100 200
Copper conductor Dia(mm) 0.9 0.9 0.9 0.9 0.9 0.9
IMPORT ITEMS (WITH QUANTITIES IN Kgs.)       
1.Copper 228.5148 571.287 342.7722 799.8018 1142.574 2285.148
2.HDPE 137.4537 343.6343 206.1806 481.088 687.2685 1374.537
3.Filling

4.Jelly
131.6723 260.6243 181.2253 371.0402 510.1027 2494.791
5.Flooding jelly 11.53856 17.25071 13.82342 20.44952 24.21954 42.95541
6.Poly Foil stock 5.931197 8.911699 7.123398 10.58078 12.54791 22.32395
7.Al Foil stock 34.47748 51.80284 41.40762 61.50505 72.93979 129.767
8.LDPE 141.1355 202.4988 165.6808 261.8984 335.7798 727.1546


Annexure “D” to the
Public Notice No. 52
Dated: 05/12/2002

PLASTIC PRODUCTS


H513 HDPE Telecom Duct 1 kg 1. HDPE Resin 1.003 kg
2. Silicore 0.037 kg
3. Colour Master Batch 0.009 kg
4. White Master batch 0.001 kg
5. Cord Strap As per packing policy
6. Buckles As per packing policy
7. Polyester Strap As per packing policy
8. Printing Ink 0.04 gms
9. Solvent for Ink 0.05 gms
H514 Thermoplastic Polyurethane Grade Desmopan 585 U-101 1 MT 1. Polyester Polyol 225 B 475.2 kg
2. 1,4 Butane-Diol 160.8 kg
3. MDI (Desmodur TPPU 0118 FUSED) 310.20 kg
4. Stabaxol 2.7 kg
5. Vinyzene S. B. –1 PS 2.7 kg
6. Desmopan KA 8551 10.00 kg
7. Nacol 18-94 2.45 kg
8. Adipic Acid 109.4 kg
H515 Low Density Polyethylene (LDPE) 1 MT 1. Ethylene 1025 kgs
2. Oleamide (Crodamide) 0.50 kg
3. Force Feed Lub Oil 1.60 kg
4. LPG 3.5 kg
5. Propylene 10 kgs
H516 Hot Melt Adhesive / thermosetting Glue containing 51 + 1% EVA Copolymer, 26 + 1% Tackifier and 23 + 1% paraffin/ Sasol Wax 1 kg 1. EVA Copolymer 0.53 kg
2. Relevant Tackifier Resin/ Petroleum Hydrocarbon Resin 0.27 kg
3. Relevant Paraffin Wax/ Sasol Wax 0.24 kg


Annexure “E” to the
Public Notice No. 52
Dated: 05/12/2002

SPORTS GOODS


Sl.No. Export Item Qty. Import Item Qty. Allowed
I42 Cricket Bat size-Full/ Men, Length 22 inch; Breadth 4.2 inch 1 No. 1. Willow cleft Length-27.5-28.5 inch; Breadth-4-6/8-5 inch; thickness-1-5/8-1-6/8 inch 1.03 No.
I43 Cricket Bat size-Harrow-Length 21.4 inch; Breadth 4.1 inch 1 No. 1. Willow cleft length-26-27 inch; Breadth-4-1/2-4-3/4 inch; Thickness-1-1/4-1-1/2 inch 1.03 No.
I44 Cricket Bat size 6 of length 21.0 inch; Breadth 4.0 inch 1 No. 1. Willow cleft Length-26-27 inch; Breadth-4-1/2-4-3/4 inch; Thickness-1-1/4-1-1/2 inch 1.03 No.
I45 Cricket Bat size 5 of Length 20.4 inch; Breadth 3.7 inch 1 No. 1. Willow cleft length-26-27 inch; Breadth-4-1/2-4-3/4 inch; thickness-1-1/4-1-1/2 inch 1.03 No.
I46 Cricket Bat size 4 of Length 19.4 inch; Breadth 3.6 inch  1. Willow cleft length-26-27 inch; Breadth-4-1/2-4-3/4 inch; Thickness-1-1/4-1-1/2 inch 1.03 No.
I47 Cricket Bat size 3 of Length 18.4 inch; Breadth 3.5 inch 1 No. 1. Willow cleft Length-26-27 inch; Breadth-4-1/2-4-3/4 inch; Thickness 1-1/4-1-1/2 inch 1.03 No.
Note (common to all sizes of Cricket Bats):-

The cane for handle of cricket bat with a diameter varying from 10 mm to 25 mm may also be imported subject to the condition that the weight of cane is 450 gm (+/-10%). Appropriate handle shall be required in export product.

Presented by eximkey.com

Trade Intelligence
Search for latest information on item wise exports and imports, from all major Indian ports.

Username
Password