Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

DGFT Notification, Circulars... Public Notices Public Notices w.e.f 01/04/2002 PUBLIC NOTICE NO. 46(RE-02), DT. 06/11/2002

PUBLIC NOTICE NO. 46 (RE-02)/2002-2007, Dt. 06/11/2002

Amendment/ Addition in SION

Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/deletions/corrections and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS
After the existing entry at Sl.No.A-3064, new entries at Sl. No. A-3065 to A-3109 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS
After the existing entry at Sl.No.C-1823, new entries at Sl.No.C-1824 to C-1825 shall be added as per Annexure ”C” to this Public Notice.

FOOD PRODUCTS
After the existing entry at Sl.No.E-107, new entries at Sl. No. E-108 to E-109 shall be added as per Annexure ”D” to this Public Notice.

PLASTIC PRODUCTS
After the existing entry at Sl.No.H-507, new entries at Sl. No. H-508 to H-512 shall be added as per Annexure ”E” to this Public Notice.

SPORTS GOODS
After the existing entry at Sl.No.I-38, new entries at Sl. No. I-39 to I-41 shall be added as per Annexure ”F” to this Public Notice.

5. This issues in public interest.

( L. MANSINGH )
DIRECTOR GENERAL OF FOREIGN TRADE

(R. C. SAINI)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE

Annexure “A” to the
Public Notice No. 46
Dated: 06/11/2002

AMENDMENTS/CORRECTIONS

Sl. No. Page No. Reference Amendments/Corrections
1 2 3 4
1. 17 - 18 Chemicals & Allied Products Sl.No.A60 The description of the export item shall be amended to read as under:-

“Ampicillin Anhydrous BP/USP”
2. 52 Chemicals & Allied Products Sl.No.A272 After the import item at Sl. No. 3 the following import item (with quantity) shall be added:-
“4. Methanol 1.00 kg”
3. Chemicals & Allied Products Sl.No.A963 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A963 Tartrazine (C.I. No. 19140) (Dye content: 87%) 1 kg 1. 1- (4 Sulphophenyl) 3- Carboxy 5-Pyrazolone

OR 0.567 kg
1. 1-Phenyl 3 Carbethoxy Pyrazolone-5 0.567 kg
2. Aniline 0.261 kg
3. Sodium Nitrite 0.150 kg
4. Caustic Soda 0.170 kg
5. Soda Ash 0.336 kg
6. Methanol 1.894 kg
4. 168 Chemicals & Allied Products Sl.No.A1369 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A1369 Isobornyl Acetate 1 kg 1. Gum Terpentine Oil containing Alpha Pinene 82.5%

OR 1.065 kg
1. Alpha Pinene 0.878 kg
2. Acetic Acid (Glacial) 0.302 kg
5. 227 Chemicals & Allied Products Sl.No.A1775, A1776 & A1777 The norms covered by these entries shall be deleted.
6. 337 Chemicals & Allied Products Sl.No.A2657 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A2657 Alpha Pinene Epoxide 1 kg 1. Alpha Pinene

OR 1.103 kg
1. Gum Turpentine Oil containing Alpha Pinene 82.5% 1.336 kg
7. 334 Chemicals & Allied Products Sl.No.A2624 The norm covered by this entry shall be deleted.
8. 368 Chemicals & Allied Products Sl.No.A2915 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
A2915 Potassium Metabisulphite 1 kg 1. Potassium Carbonate 0.960 kg
9. 18 Chemicals & Allied Products Sl.No.A2997 (as amended vide Public Notice No. 20 Dated:01.07.2002) The description of import item at Sl. No. 4 (without any change in quantity) shall be amended to read as under:-

“Diamino Stilbene Disulphonic Acid (4, 4 Diamino Stilbene 2, 2 Disulfonic Acid)”
10. 18 Chemicals & Allied Products Sl.No.A2998 (as amended vide Public Notice No. 20 Dated:01.07.2002) The quantities of import items at Sl. No. 2 & 3 shall be amended to read as under:-

“2. 0.165 kg

3. 0.160 kg”
11. 35 Chemicals & Allied Products Sl.No.A3051 (Notified vide Public Notice No. 44 Dated:18.10.2002 The norm covered by this entry shall be deleted.
12. 425 Electronic Product Sl.No.B-99 The description of export Item shall be amended to read as under:-

“Medical Audiometers, Constant Temperature Baths/Plates, Transducers and Pathological Instruments such as Blood Gas Analyser, Electrolytic Analyser etc.”
13. 430 Electronic Product Sl.No.B-108 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
B-108 Multiform Bead Glass 1 kg 1. Spray Dried Glass Powder

OR 1.05 kg
1. Glass Frit

OR 1.1 kg
1. Milled Glass Powder 1.05 kg
2. Polyethylene Glycol 0.06 kg
3. Colouring Pigment 0.0125 kg
4. Lanco Wax 0.003 kg
5. Butyl Hydroxy Anisole 0.003 kg
Note : Import of item at Sl. No. 2 to 5 will not be allowed if Spray Dried Glass Powder is opted under item No. 1
14. 509-510 Engineering Product Sl.No.C189 1. After the import item at Sl. No. 1(h) the following (without any quantity) shall be added:-
“1(I). Capacitor (Condenser) Net to Net”
2. The import items at Sl. Nos. 6 & 7 (with quantity) shall be deleted.
15. 515 Engineering Product Sl.No.C206 The description of export product shall be amended to read as under:-

“Enamelled Copper wire (not elsewhere specified)”
16. 525 Engineering Product Sl.No.C248 After the existing foot notes below this norms, the following additional note shall be added:-

“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
17. 530 Engineering Product Sl.No.C270 After the existing foot notes below this norms, the following additional note shall be added:-

“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
18. 5 Engineering Product Sl.No.C274 (amended vide Public Notice No.20 Dated:01/07/2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C274 Radiators for Transformers (made out of CRCA Non Alloy Steel Sheet) 1 kg 1. CRCA Sheets / Coils 1.05 kg/kg
Note : In case of Coated/Painted radiators, relevant coating / painting materials may be allowed on actual requirement basis upto 10% of the FOB value of export
19. 541 Engineering Product Sl.No.C301 1. The description of export item shall be amended to read as under:-

“Steel Welding Electrodes made of Mild Steel / Stainless Steel”

2. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:-

“Relevant Mild Steel Wire Rod/ Stainless Steel Wire Rod”
20. 586 Engineering Product Sl.No.C474 The description of export item shall be amended to read as under:-

“Mild Steel Cold Rolled wide Coil (Black Plate in Coil)”
21. 693-694 Engineering Product Sl.No.C985 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C985 Automotive Radiator made of Copper and Brass with/without tank 1 kg (without tank) 1. Copper Foils 0.22 kg
2. Brass Foils/Tubes

OR 0.22 kg
(a) Copper Cathode/ Wire Bar Ingot/ Rod 0.162 kg
(b) Zinc Ingot 0.07 kg
3. Brass Sheet

OR 0.31 kg
(a) Copper Cathode/ Wire Bar / Ingot / Rod 0.228 kg
(b) Zinc Ingot 0.098 kg
4. a) Tin Ingot 0.07 kg
4. b) Lead Ingot 0.03 kg
5. Terne Plate or CRCA Sheet/Coil/Strips 0.10 kg
6. Nylon 66

OR 1.024 kg/kg content in the Tank
6. Tank of relevant Size & specification Net to net
22. 706-707 Engineering Product Sl.No.C1058 After the import item at Sl. No. 10 the following additional inputs (with quantity) shall be added:-
“11. ABS Resin 1.035 kg/kg content in the export product
12. Epoxy Resin 1.05 kg/kg content in the export product
13. Hardner 1.05 kg/kg content in the export product
14. Pigment Red/Black 1.05 kg/kg content in the export product
15. Ink for Silk Screen 1.01 kg/kg content in the export product
16. Additives 1.05 kg/kg content in the export product
17. Terminals Net to Net
18. Safety vent valves Net to Net
23. 780 Engineering Product Sl.No.C1382 After the existing foot note below this norms, the following additional note shall be added:-

“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
24. 782 Engineering Product Sl.No.C1392 After the existing foot note below this norms, the following additional note shall be added:-

“Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
25. 20 Engineering Product Sl.No.C1794 (amended vide Public Notice No. 27 Dated:01/08/2002) The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1794 Enamelled copper wire with self bonding enamel of less than 0.1 mm diameter (not elsewhere specified) 1 kg 1. Copper Rod/Copper wire dia 0.1 mm and above 1.12 kg/kg content in the export product
2. Self bonding enamel having solid content of 10% CIF value restricted upto 8% of the FOB value
26. 478 GENERAL NOTES FOR ENGINEERING PRODUCTS After the general note for Engineering products at sl. No. 3 the following general note shall be added:-

“Note : 4. For Import of components, in respect of Export product (a) where norms have not been standardized and published and the applicant seeks to import only Components (without any raw material, consumables etc.) or (b) where SION do not provide import of Components or (c) where additional Components in addition to those allowed in norms are sought, the Components as an input may be allowed for import on net-to-net basis, without any wastage, by the Licensing Authority. Import of components sought as Spares shall be governed by the Policy for Spares. In such cases, the import of Components allowed shall be permitted with accountability clause and the type, technical specifications (including part No. if any), etc. of the Components sought for import should conform to those utilized in the manufacturing of the resultant product, which should be reflected in export documents (Shipping Bills) also. A condition to this effect shall be imposed on the licence.”
27. 910 Food Product Sl.No.E32 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
E32 Nutmeg Oil 1 kg 1. Nutmeg whole with shell (BWP) (broken Wormy Panky) 15 kg
Nutmeg Oleoresin 1 kg 1. Nutmeg whole with shell 7 kg
28. 910 Food Product Sl.No.E42 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
E42 Soyabean Extraction 1 MT 1. Hexane 9.20 Ltrs
2. Coal 110 kg
3. Diesel (for power generation) 11 Ltrs.
Note 1. Item No. 3, i.e. Diesel shall be allowed only under A.U. condition.

Note 2. The norms for Diesel are applicable only to those units which have facility for captive power generation using diesel as fuel.

Note 3. Item No. 2, i.e. Coal is allowed as a process material essentially for heating purpose in the manufacture of Soyabean extraction and not for power generation for running the plant.
29. 1007 Plastic Product Sl.No.H-264 The description of import item at Sl. No. 5 (without any change in quantity) shall be amended to read as under:-

“Processing Aid/Stabilizers”
30. 1007 - 1008 Plastic Product Sl.No.H-268 The description of import item at Sl. No. 5 (without any change in quantity) shall be amended to read as under:-

“Processing Aid/Stabilizers”
31. 1021 - 1022 Plastic Product Sl.No.H-331 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
H-331 Tooth Brushes 1 kg 1. a) Relevant Polymer namely SAN/ Cellulose Acetate/ ABS/PS/TPE/ TPR 1.05 kg/kg content in export product
1. b) Relevant Dyes

OR 1% of Plastic content at (a) above.
1. Relevant Tooth Brush Handles Net + 2% wastage
2. Relevant Nylon 6/66/612 Monofilament 1.05 kg/kg content in export product
Relevant Aluminium / Nickel / Nickel Silver Wire 1.01 kg/kg content in export product
32. 1086 Textile Product Sl.No.J-96 The norm covered by this entry shall be substituted by the following:-
Sl.No. Export Item Qty. Import Item Qty. Allowed
J-96 Cotton Dyed Denim Cloth with/without Elaston/Lycra/ Spandex Yarn 1 kg 1. Raw Cotton

OR 1.24 kg/kg content in the export product
1. Cotton Yarn 1.04 kg/kg content in the export product
2. Vat Indigo Blue Dye

OR 0.05 kg
2. Vat (other than Indigo)/ Reactive / Sulphur/Pigment Dyes 0.015 kgs
3. Polyvinyl Alcohol 0.03 kg
4. Sodium Hydrosulphite 0.02 kg
5. Caustic Soda Flakes 0.02 kg
6. Elaston/Lycra/ Spandex Yarn

OR 1.05 kg/kg of material content in the export product
6. Stretch Yarn (mixed Yarn containing 95% Cotton and 5% of Elaston / Lycra/Spandex Yarn) 1.05 kg/kg of materials content in the export product
7. Poly Acrylic Synthetic Sizing agent / Poly Acryl Amide Solution 0.016 kg
8. Sulfoesterifiedamide Starch / modified starch 0.044 kg
9. (a) Fuel for power generation for mills having spinning, weaving and processing activities (raw cotton as raw material)

Naphtha

OR 1.22 kg
SKO

OR 1.22 kg
Furnace Oil

OR 0.92 litre
HSD 1.10 litre
9. (b) Fuel for power generation for mills having weaving and processing activities (cotton yarn as raw material)

Naphtha

OR 0.73 kgs.
SKO

OR 0.73 kgs.
Furnace Oil

OR 0.65 litre
HSD 0.77 litre
Note : (i) Naphtha, SKO, Furnace Oil and HSD shall be allowed only under AU condition. (ii) the above norms for fuel are applicable to units having spinning, weaving and processing activities or weaving and processing activities. Also the said units should have facilities for captive power generation using Naphtha / SKO/Furnace Oil/HSD (iii) Vat Indigo Blue Dye shall be allowed for import only when the export item is indigo blue dyed denim cloth.

Annexure “B” to the
Public Notice No. 46
Dated: 06/11/2002
CHEMICALS AND ALLIED PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed
A3065 Alpha Campholenic Aldehyde 1 kg 1. Alpha Pinene

OR 1.654 kg
1. Gum Turpentine Oil containing Alpha Pinene 82.5% 2.00 kg
A3066 Di-hydro Myrcene 1 kg 1. Alpha Pinene

OR 1.691 kg
1. Gum Turpentine Oil containing Alpha Pinene 82.5% 2.073 kg
A3067 MDEA-P (Blended mixture of methyl Diethanolamine and Piperazine containing Piperazine 20 + 1% 1 kg 1. Piperazine 0.210 kg
A3068 Catalyst 59-5/59-5M containing ZnO 36%, and Na2O - 17%, Al2O3 - 30% 1 kg 1. Zinc Carbonate 0.616 kg
2. Sodium by carbonate 0.511 kg
3. Alumina Trihyderate 0.480 kg
4. Atta Gel 0.154 kg
A3069 Ferric Chloride 1 MT 1. Furnace Oil 0.035 MT
A3070 Fluorescent Pigment Green HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Solvent Dyes 0.030 kg
A3071 Fluorescent Pigment Magenta HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.035 kg
A3072 Fluorescent Pigment Chrome HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.006 kg
5. Solvent Dyes 0.028 kg
A3073 Fluorescent Pigment Orange HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.014 kg
5. Solvent Dyes 0.037 kg
A3074 Fluorescent Pigment Pink HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.026 kg
A3075 Fluorescent Pigment Red HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.026 kg
5. Solvent Dyes 0.009 kg
A3076 Fluorescent Pigment Red Orange HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.017 kg
5. Solvent Dyes 0.025 kg
A3077 Fluorescent Pigment Blue HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.032 kg
A3078 Fluorescent Pigment Violet HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Basic Dyes 0.011 kg
A3079 Fluorescent Pigment Yellow HTPB (Polyamide Matrix content 95%) 1 kg 1. Isophorone Diamine 0.363 kg
2. Isophthalic Acid 0.430 kg
3. Optical Brightner 0.001 kg
4. Solvent Dyes 0.039 kg
A3080 Fluorescent Pigment Chrome HTPA (Polyester Matrix content 95%) 1 kg 1. Melamine 0.102 kg
2. Optical Brightner 0.001 kg
3. Basic Dyes 0.010 kg
4. Solvent Dyes 0.028 kg
A3081 Fluorescent Pigment Green HTPA (Polyester Matrix content 95%) 1 kg 1. Melamine 0.102 kg
2. Optical Brightner 0.001 kg
3. Solvent Dyes 0.027 kg
A3082 Fluorescent Pigment Orange HTPA (Polyester Matrix content 95%) 1 kg 1. Melamine 0.102 kg
2. Optical Brightner 0.001 kg
3. Basic Dyes 0.019 kg
4. Solvent Dyes 0.030 kg
A3083 Fluorescent Pigment Pink HTPA (Polyester Matrix content 95%) 1 kg 1. Melamine 0.102 kg
2. Optical Brightner 0.001 kg
3. Basic Dyes 0.052 kg
A3084 Fluorescent Flushed Ink concentrate-Lemon Yellow (Amino Sulphonamide content 47%) 1 kg 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide) 0.322 kg
2. Melamine 0.090 kg
3. Para Formaldehyde 0.140 kg
4. Optical Brightner 0.001 kg
5. Solvent Dyes 0.028 kg
A3085 Fluorescent Flushed Ink concentrate-Magenta (Amino Sulphonamide content 47%) 1 kg 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide) 0.322 kg
2. Melamine 0.079 kg
3. Para Formaldehyde 0.127 kg
4. Optical Brightner 0.001 kg
5. Basic Dyes 0.031 kg
6. Solvent Dyes 0.001 kg
A3086 Fluorescent Flushed Ink concentrate-Fire Orange (Amino Sulphonamide content 47%) 1 kg 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide) 0.322 kg
2. Melamine 0.079 kg
3. Para Formaldehyde 0.122 kg
4. Optical Brightner 0.001 kg
5. Basic Dyes 0.012 kg
6. Solvent Dyes 0.043 kg
A3087 Fluorescent Flushed Ink concentrate-Pink (Amino Sulphonamide content 47%) 1 kg 1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide) 0.322 kg
2. Melamine 0.079 kg
3. Para Formaldehyde 0.122 kg
4. Optical Brightner 0.001 kg
5. Basic Dyes 0.023 kg
6. Solvent Dyes 0.001 kg
A3088 Reactive Blue 221 (Reactive Blue BRX) 1 kg 1. Cyanuric Chloride 0.187 kg
2. N-Ethyl Meta Base Ester 0.310 kg
A3089 Disperse Yellow SBL RG2 (Disperse Yellow 86) 1 kg 1. Para Phenetidine 0.480 kg
2. Ortho Nitro Chloro Benzene (ONCB) 0.650 kg
A3090 Raney Nickel Catalyst (Activated suspended in water) Nickel content : 92-96% Aluminium content 4-6% 1 kg (on dry basis) 1. Nickel Metal 1.00 kg
2. Aluminium Metal 1.0 kg
3. Caustic Soda 2.50 kg
A3091 Aminosol P 40 (Blended mixture of Methyl Diethanolamine and Piperazine containing Piperazine 40 + 1% 1 kg 1. Piperazine 0.420 kgs
A3092 Lisinopril 1 kg 1. L-Proline 0.927 kg
2. Trifluoro Acetic Acid 1.26 kg
3. Methylene Chloride 10.77 kg
4. Acetone 0.482 kg
5. Methanol 5.60 kg
6. Toluene 6.17 kg
7. Tetra Hydofuran 0.616 kg
8. Isopropyl Alcohol 4.27 kg
9. Activated Carbon 0.100 kg
10.Benzyl Chloroformate 1.30 kg
11.5% Palladium on Charcoal 0.011 kg
12.Pivaloyl Chloride 0.584 kg
13.Potassium Carbonate 0.789 kg
14.Raney Nickel Catalyst 0.100 kg
15.Triethylamine 0.536 kg
16.Di Iso Propyl Ether 1.92 kg
17.L-Lysine Hcl 1.545 kg
18.Magnesium Metal 0.214 kg
19.Cyclohexane 0.177 kg
A3093 Phenocyanol 1 kg 1. Meta Phenoxy Benzaldehyde 0.861 kg
2. Sodium Cyanide 0.288 kg
3. Iso Propyl Ether 0.137 kg
A3094 Diacetyl Acyclovir 1 kg 1. Guanine

OR 0.60 kg
a) Ethyl Cyano Acetate 0.80 kg
b) Guanidine Nitrate 0.90 kg
c) Sodium Metal 0.35 kg
OR

Sodium Methoxide 0.82 kg
d) Formic Acid 1.62 kg
e) Sodium Nitrite 0.40 kg
f) Formamide 0.25 kg
2. 1,3 Dioxalane 0.50 kg
3. Benzyl Toluene 0.50 kg
4. Dimethyl Acetamide 1.10 kg
A3095 Sterile Ceftazidime 1 kg 1. T.A. E. M. 1.573 kg
2. Acetone 4.32 kg
3. Hexamethyl Disilane 1.707 kg
4. Iodine 2.50 kg
5. Isopropyl Alcohol 3.52 kg
6. Methylene Chloride 2.23 kg
7. Methanol 2.216 kg
8. Pyridine 1.89 kg
9. Activated Carbon 0.071 kg
10.Sterile Sodium Carbonate 0.093 kg
11.Triethyl Amine 0.069 kg
12.Formic Acid (98%) 3.70 kg
13.Formic Acid (85%) 0.211 kg
14.Caustic Soda 4.302 kg
15.7 ACA 1.08 kg
A3096 Phenazone BP/EP 1 kg 1. 1-Phenyl-3-Methyl-5-Pyrazolone 1.32 kg
2. Isopropyl Alcohol 0.50 kg
A3097 Flutamide 1 kg 1. 3-Amino Benzo Tri Fluride 1.457 kg
2. Iso Butyryl Chloride 1.08 kg
3. N-Heptane/ Heptane 1.00 kg
4. Toluene 0.48 kg
A3098 Meta Nitro Para Toluidine 1 kg 1. Para Toluidine 1.032 kg
2. Acetic Acid 0.624 kg
3. Acetic Anhydride 0.147 kg
A3099 Phenyl Proanolamine Hcl 1 kg 1. Propiophenone 1.91 kg
2. Methanol 0.50 kg
3. Acetone 0.56 kg
4. Isopropyl Alcohol 1.25 kg
5. Toluene 1.08 kg
A3100 N-Cyano Ethyl Aniline 1 kg 1. Aniline Oil 0.680 kg
2. Acrylonitrile 0.440 kg
A3101 Lake Erythrosine (Dye content as Erythrosine = 52%) (C.I. No. 45430:1) 1 kg 1. Resorcinol 0.345 kg
2. Phthalic Anhydride 0.232 kg
3. Iodine 0.721 kg
4. Acetic Acid Glacial 0.733 kg
5. Caustic Soda 0.257 kg
6. Aluminium Hydroxide 0.603 kg
7. Aluminium Chloride 0.131 kg
A3102 Anticorrosion VCI Wrapping Paper of GSM 200-225 having a Coating Weight of VCI 0.035 kg/Sq.Metre. 1 Sq. Meter 1. HDPE Laminated Paper of relevant GSM 1.02 Sq. Metre
2. VCI Concentrate Net content + 2% wastage
A3103 Nickel Catalyst (Ni content 22.5 + 1%) Hydrogenated Vegetable Oil content (60 + 2%) 1 kg 1. Nickel Metal/ Nickel sulfate/spent Nickel catalyst (100%) Nickel basis) 0.236 kg
2. RBD Vegetable Oil

OR 0.638 kg
2. Hydrogenated Vegetable Oil 0.638 kg
3. Soda Ash 0.800 kg
A3104 Permanent Marker Ink/ White Board Marker Ink In consumer pack up to 60 ml 1 kg 1. Permanent Marker Ink/ White Board Marker Ink In Bulk of relevant technical specification 1.01 kg
A3105 Chlorinated Paraffin Wax (40-45% Chlorine content) 1 kg 1. Paraffin (C10-C30) 0.660 kgs
2. Chlorine 0.880 kg
3. Relevant Stabilizer 0.010 kgs
A3106 Chlorinated Paraffin Wax (46-50% Chlorine content) 1 kg 1. Paraffin (C10-C30) 0.605 kgs
2. Chlorine 0.990 kgs
3. Relevant Stabilizer 0.010 kgs
A3107 Chlorinated Paraffin Wax (51-55% Chlorine content) 1 kg 1. Paraffin (C10-C30) 0.550 kgs
2. Chlorine 1.10 kgs
3. Relevant Stabilizer 0.010 kgs
A3108 Chlorinated Paraffin Wax (56-60% Chlorine content) 1 kg 1. Paraffin (C10-C30) 0.495 kgs
2. Chlorine 1.22 kgs
3. Relevant Stabilizer 0.010 kgs
A3109 Chlorinated Paraffin Wax (61-65% Chlorine content) 1 kg 1. Paraffin (C10-C30) 0.440 kgs
2. Chlorine 1.34 kgs
3. Relevant Stabilizer 0.010 kgs

Annexure “C” to the
Public Notice No. 46
Dated: 06/11/2002
ENGINEERING PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed
C1824 Lead Cored Wire 1 kg 1. Lead Ingots 1.02 kg/kg content in export product
2. CRCA Steel Strips 1.01 kg/kg content in export product
C1825 Frame Assembly, (Exhaust frame for Steam Turbine Generator) 1 No. (34.4 MT) 1. Non Alloy Steel Plates 1.20 kg/kg content in export product
2. Relevant Steel Forgings/ Components Flanges, Rings, Segmental Rings, Bars Net to Net
3. Stainless Steel Sheets/ Plates 1.05 kg/kg content in export product
4. Relevant Castings Net to Net
5. Relevant Studs/Nuts/ Bolts/Screws/Pins/ Dowels Adapters/ Connectors/Washer Springs Net to Net
6. Gaskets Net to Net
7. Wire Inserts Net to Net
8. Insulation Material 1.02 Sq.Mtr./ Sq.Mtr. content in the export product
9. Insulation Paper 1.02 Sq.Mtr. / Sq.Mtr. content in the export product
10. Welding Electrodes/ Wires (In Straight Lengths/Coils/Spools) 2% of net weight of Steel to be welded
11. Welding Flux 0.5% of net weight of Steel to be welded

Annexure “D” to the
Public Notice No. 46
Dated: 06/11/2002
FOOD PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed
E108 Table Eggs 1000 Nos. 1. Di-Calcium Phosphate 1.85 kg
2. Pigment/Color viz. Beta-Carotene 10%, 20%, 30% Carophyll Red/ Yellow 0.74 kg
3. Antibiotics and Coccidiostats viz. Neomycin, Tylosin, Auromycin, Amprolium, their salts and compounds 0.37 kg
4. Premix Vitamin supplements (including Calcium Di-Pantothenate 45%) 0.25 kg
5. Packing material (Card Board & Chromo paper) Net+5% wastage
Note 1.a) Pure medicines should not exceed 20% of the total weight of medicine in case of import item No. 3.

b) In case of import item No. 4, pure vitamins should not exceed 50% of the total premix weight and the vitamin premix should contain a mixture of two or more vitamins.
E109 Fresh Fruits and Vegetables 1 kg 1. Corrugated Boxes Net + 1% wastage
2. EPS Moulded Boxes Net + 1% wastage
3. BOPP Self Adhesive Tapes 1.05 kg/kg of the weight of BOPP Self Adhesive Tapes
4. Relevant Wrapping Papers of relevant GSM ( + 10%) 1.05 kg/kg of the weight of relevant wrapping paper of relevant GSM ( + 10%)
5. HDPE/LDPE/PP Bags 1.01 kg/kg of the weight of relevant packing material
6. Relevant Plastic Box Strapping Rolls 1.05 kg/kg of the weight of relevant packing material

Annexure “E” to the
Public Notice No. 46
Dated: 06/11/2002
PLASTIC PRODUCTS
Sl.No. Export Item Qty. Import Item Qty. Allowed
H508 Self Adhesive Tear tape/ Tear Off Ribbon width 1.00 mm-9.00 mm minimum length 1000 meters 1 kg 1. MOPP/ BOPP Film 0.830 kg
2. Acrylic Synthetic Emulsion/ Water Based Adhesive (Solid content 55% + 10%) 0.640 kg
3. Release Coat 0.016 kg
OR
1. Pancakes of Self Adhesive tear Tape/ Tear Off Ribbon (width range 25.1 mm-1050 mm) 1.07 kg
2. Relevant Bobbin Net to net
H509 Printed / Design Self Adhesive Tear Tape/ Tear Off Ribbon width 1.00 mm-9.00 mm minimum Length 1000 meters 1 kg 1. MOPP/ BOPP film 0.835 kg
2. Acrylic Synthetic Emulsion / Water Based Adhesive (Solid content 55% + 10%) 0.645 kg
3. Release Coat 0.017 kg
4. Printing Ink (Solid content 40% + 10%) 0.077 kg
5. Additive 0.007 kg
6. Thinner 0.039 kg
OR
1. Pancakes of Printed / Design Self Adhesive Tear Tape/ Tear Off Ribbon (width Range 25.1 mm-1050 mm) 1.09 kg
2. Relevant Bobbin Net to net
H510 Plain Self Adhesive Tear Tape / Tear Off Ribbon width 9.1 mm-25.00 mm minimum Length 1000 meters 1 kg 1. MOPP/ BOPP Film 0.816 kg
2. Acrylic Synthetic Emulsion / Water Based Adhesive (Solid content 55% + 10%) 0.627 kg
3. Release Coat 0.016 kg
H511 Pancakes of Self Adhesive Tear Tape/ Tear Off Ribbon width 25.1 mm-1050 mm 1 kg 1. MOPP/ BOPP Film 0.775 kg
2. Acrylic Synthetic Emulsion/ Water Based Adhesive (Solid content 55% + 10%) 0.595 kg
3. Release Coat 0.015 kg
H-512 PVC Sole for Hawai Chappal (without Filler) 1 kg 1. PVC Resin (Suspension Grade) 0.752 kg
2. Di-octyl Phthalate Plasticizer (DOP) 0.280 kg
3. Di-iso-Decyl Phthalate Plasticizer (DIDP) 0.032 kg
4. Lead Stabilizer 0.011 kg

Annexure “F” to the
Public Notice No. 46
Dated: 06/11/2002
SPORTS GOODS
Sl.No. Export Item Qty. Import Item Qty. Allowed
I39 Football/Soccer Ball Size X S (Extra Small) 1 No. 1. Relevant PVC/PU Leather Cloth 0.08 Sq.mtr.
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM 0.08 Sq.mtr. per relevant layer
3. Cotton Fabric of Relevant GSM 0.08 Sq.mtr. per relevant layer
4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%) 10 Gms per relevant layer
5. Relevant Butyl Bladder / Latex Bladder / PU Bladder 1.02 Nos.
6. Thread 8 mtrs.
7. Ink 1 gm
8. Thinner 0.25 gm
9. Hardener 0.25 gm
I40 Football/Soccer Ball Size 1 1 No. 1. Relevant PVC/PU Leather Cloth 0.13 Sq. mtr.
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM 0.13 Sq.mtr. per relevant layer
3. Cotton Fabric of Relevant GSM 0.13 Sq. mtr. per relevant layer
4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%) 13 gm per relevant layer
5. Relevant Butyl Bladder / Latex Bladder / PU Bladder 1.02 Nos.
6. Thread 9 mtrs.
7. Ink 2 gm
8. Thinner 0.5 gm
9. Hardener 0.5 gm
I41 Football/Soccer Ball Size 2 1 No. 1. Relevant PVC/PU Leather Cloth 0.15 Sq. mtr.
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM 0.15 Sq.mtr. per relevant layer
3. Cotton Fabric of Relevant GSM 0.15 Sq. mtr. per relevant layer
4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%) 15 gm per relevant layer
5. Relevant Butyl Bladder / Latex Bladder / PU Bladder 1.02 Nos.
6. Thread 10 mtrs.
7. Ink 2.5 gm
8. Thinner 0.5 gm
9. Hardener 0.5 gm

Presented by eximkey.com

Sl. No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	17 - 18	Chemicals & Allied Products Sl.No.A60	The description of the export item shall be amended to read as under:- “Ampicillin Anhydrous BP/USP”
2.	52	Chemicals & Allied Products Sl.No.A272	After the import item at Sl. No. 3 the following import item (with quantity) shall be added:-
“4. Methanol	1.00 kg”
3.		Chemicals & Allied Products Sl.No.A963	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A963	Tartrazine (C.I. No. 19140) (Dye content: 87%)	1 kg	1. 1- (4 Sulphophenyl) 3- Carboxy 5-Pyrazolone OR	0.567 kg
1. 1-Phenyl 3 Carbethoxy Pyrazolone-5	0.567 kg
2. Aniline	0.261 kg
3. Sodium Nitrite	0.150 kg
4. Caustic Soda	0.170 kg
5. Soda Ash	0.336 kg
6. Methanol	1.894 kg
4.	168	Chemicals & Allied Products Sl.No.A1369	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A1369	Isobornyl Acetate	1 kg	1. Gum Terpentine Oil containing Alpha Pinene 82.5% OR	1.065 kg
1. Alpha Pinene	0.878 kg
2. Acetic Acid (Glacial)	0.302 kg
5.	227	Chemicals & Allied Products Sl.No.A1775, A1776 & A1777	The norms covered by these entries shall be deleted.
6.	337	Chemicals & Allied Products Sl.No.A2657	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2657	Alpha Pinene Epoxide	1 kg	1. Alpha Pinene OR	1.103 kg
1. Gum Turpentine Oil containing Alpha Pinene 82.5%	1.336 kg
7.	334	Chemicals & Allied Products Sl.No.A2624	The norm covered by this entry shall be deleted.
8.	368	Chemicals & Allied Products Sl.No.A2915	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2915	Potassium Metabisulphite	1 kg	1. Potassium Carbonate	0.960 kg
9.	18	Chemicals & Allied Products Sl.No.A2997 (as amended vide Public Notice No. 20 Dated:01.07.2002)	The description of import item at Sl. No. 4 (without any change in quantity) shall be amended to read as under:- “Diamino Stilbene Disulphonic Acid (4, 4 Diamino Stilbene 2, 2 Disulfonic Acid)”
10.	18	Chemicals & Allied Products Sl.No.A2998 (as amended vide Public Notice No. 20 Dated:01.07.2002)	The quantities of import items at Sl. No. 2 & 3 shall be amended to read as under:- “2. 0.165 kg 3. 0.160 kg”
11.	35	Chemicals & Allied Products Sl.No.A3051 (Notified vide Public Notice No. 44 Dated:18.10.2002	The norm covered by this entry shall be deleted.
12.	425	Electronic Product Sl.No.B-99	The description of export Item shall be amended to read as under:- “Medical Audiometers, Constant Temperature Baths/Plates, Transducers and Pathological Instruments such as Blood Gas Analyser, Electrolytic Analyser etc.”
13.	430	Electronic Product Sl.No.B-108	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
B-108	Multiform Bead Glass	1 kg	1. Spray Dried Glass Powder OR	1.05 kg
1. Glass Frit OR	1.1 kg
1. Milled Glass Powder	1.05 kg
2. Polyethylene Glycol	0.06 kg
3. Colouring Pigment	0.0125 kg
4. Lanco Wax	0.003 kg
5. Butyl Hydroxy Anisole	0.003 kg
Note : Import of item at Sl. No. 2 to 5 will not be allowed if Spray Dried Glass Powder is opted under item No. 1
14.	509-510	Engineering Product Sl.No.C189	1. After the import item at Sl. No. 1(h) the following (without any quantity) shall be added:-
“1(I). Capacitor (Condenser)	Net to Net”
2. The import items at Sl. Nos. 6 & 7 (with quantity) shall be deleted.
15.	515	Engineering Product Sl.No.C206	The description of export product shall be amended to read as under:- “Enamelled Copper wire (not elsewhere specified)”
16.	525	Engineering Product Sl.No.C248	After the existing foot notes below this norms, the following additional note shall be added:- “Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
17.	530	Engineering Product Sl.No.C270	After the existing foot notes below this norms, the following additional note shall be added:- “Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
18.	5	Engineering Product Sl.No.C274 (amended vide Public Notice No.20 Dated:01/07/2002)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C274	Radiators for Transformers (made out of CRCA Non Alloy Steel Sheet)	1 kg	1. CRCA Sheets / Coils	1.05 kg/kg
Note : In case of Coated/Painted radiators, relevant coating / painting materials may be allowed on actual requirement basis upto 10% of the FOB value of export
19.	541	Engineering Product Sl.No.C301	1. The description of export item shall be amended to read as under:- “Steel Welding Electrodes made of Mild Steel / Stainless Steel” 2. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- “Relevant Mild Steel Wire Rod/ Stainless Steel Wire Rod”
20.	586	Engineering Product Sl.No.C474	The description of export item shall be amended to read as under:- “Mild Steel Cold Rolled wide Coil (Black Plate in Coil)”
21.	693-694	Engineering Product Sl.No.C985	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C985	Automotive Radiator made of Copper and Brass with/without tank	1 kg (without tank)	1. Copper Foils	0.22 kg
2. Brass Foils/Tubes OR	0.22 kg
(a) Copper Cathode/ Wire Bar Ingot/ Rod	0.162 kg
(b) Zinc Ingot	0.07 kg
3. Brass Sheet OR	0.31 kg
(a) Copper Cathode/ Wire Bar / Ingot / Rod	0.228 kg
(b) Zinc Ingot	0.098 kg
4. a) Tin Ingot	0.07 kg
4. b) Lead Ingot	0.03 kg
5. Terne Plate or CRCA Sheet/Coil/Strips	0.10 kg
6. Nylon 66 OR	1.024 kg/kg content in the Tank
6. Tank of relevant Size & specification	Net to net
22.	706-707	Engineering Product Sl.No.C1058	After the import item at Sl. No. 10 the following additional inputs (with quantity) shall be added:-
“11. ABS Resin	1.035 kg/kg content in the export product
12. Epoxy Resin	1.05 kg/kg content in the export product
13. Hardner	1.05 kg/kg content in the export product
14. Pigment Red/Black	1.05 kg/kg content in the export product
15. Ink for Silk Screen	1.01 kg/kg content in the export product
16. Additives	1.05 kg/kg content in the export product
17. Terminals	Net to Net
18. Safety vent valves	Net to Net
23.	780	Engineering Product Sl.No.C1382	After the existing foot note below this norms, the following additional note shall be added:- “Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
24.	782	Engineering Product Sl.No.C1392	After the existing foot note below this norms, the following additional note shall be added:- “Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity of PVC resin”
25.	20	Engineering Product Sl.No.C1794 (amended vide Public Notice No. 27 Dated:01/08/2002)	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1794	Enamelled copper wire with self bonding enamel of less than 0.1 mm diameter (not elsewhere specified)	1 kg	1. Copper Rod/Copper wire dia 0.1 mm and above	1.12 kg/kg content in the export product
2. Self bonding enamel having solid content of 10%	CIF value restricted upto 8% of the FOB value
26.	478	GENERAL NOTES FOR ENGINEERING PRODUCTS	After the general note for Engineering products at sl. No. 3 the following general note shall be added:- “Note : 4. For Import of components, in respect of Export product (a) where norms have not been standardized and published and the applicant seeks to import only Components (without any raw material, consumables etc.) or (b) where SION do not provide import of Components or (c) where additional Components in addition to those allowed in norms are sought, the Components as an input may be allowed for import on net-to-net basis, without any wastage, by the Licensing Authority. Import of components sought as Spares shall be governed by the Policy for Spares. In such cases, the import of Components allowed shall be permitted with accountability clause and the type, technical specifications (including part No. if any), etc. of the Components sought for import should conform to those utilized in the manufacturing of the resultant product, which should be reflected in export documents (Shipping Bills) also. A condition to this effect shall be imposed on the licence.”
27.	910	Food Product Sl.No.E32	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
E32	Nutmeg Oil	1 kg	1. Nutmeg whole with shell (BWP) (broken Wormy Panky)	15 kg
Nutmeg Oleoresin	1 kg	1. Nutmeg whole with shell	7 kg
28.	910	Food Product Sl.No.E42	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
E42	Soyabean Extraction	1 MT	1. Hexane	9.20 Ltrs
2. Coal	110 kg
3. Diesel (for power generation)	11 Ltrs.
Note 1. Item No. 3, i.e. Diesel shall be allowed only under A.U. condition. Note 2. The norms for Diesel are applicable only to those units which have facility for captive power generation using diesel as fuel. Note 3. Item No. 2, i.e. Coal is allowed as a process material essentially for heating purpose in the manufacture of Soyabean extraction and not for power generation for running the plant.
29.	1007	Plastic Product Sl.No.H-264	The description of import item at Sl. No. 5 (without any change in quantity) shall be amended to read as under:- “Processing Aid/Stabilizers”
30.	1007 - 1008	Plastic Product Sl.No.H-268	The description of import item at Sl. No. 5 (without any change in quantity) shall be amended to read as under:- “Processing Aid/Stabilizers”
31.	1021 - 1022	Plastic Product Sl.No.H-331	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H-331	Tooth Brushes	1 kg	1. a) Relevant Polymer namely SAN/ Cellulose Acetate/ ABS/PS/TPE/ TPR	1.05 kg/kg content in export product
1. b) Relevant Dyes OR	1% of Plastic content at (a) above.
1. Relevant Tooth Brush Handles	Net + 2% wastage
2. Relevant Nylon 6/66/612 Monofilament	1.05 kg/kg content in export product
Relevant Aluminium / Nickel / Nickel Silver Wire	1.01 kg/kg content in export product
32.	1086	Textile Product Sl.No.J-96	The norm covered by this entry shall be substituted by the following:-
Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
J-96	Cotton Dyed Denim Cloth with/without Elaston/Lycra/ Spandex Yarn	1 kg	1. Raw Cotton OR	1.24 kg/kg content in the export product
1. Cotton Yarn	1.04 kg/kg content in the export product
2. Vat Indigo Blue Dye OR	0.05 kg
2. Vat (other than Indigo)/ Reactive / Sulphur/Pigment Dyes	0.015 kgs
3. Polyvinyl Alcohol	0.03 kg
4. Sodium Hydrosulphite	0.02 kg
5. Caustic Soda Flakes	0.02 kg
6. Elaston/Lycra/ Spandex Yarn OR	1.05 kg/kg of material content in the export product
6. Stretch Yarn (mixed Yarn containing 95% Cotton and 5% of Elaston / Lycra/Spandex Yarn)	1.05 kg/kg of materials content in the export product
7. Poly Acrylic Synthetic Sizing agent / Poly Acryl Amide Solution	0.016 kg
8. Sulfoesterifiedamide Starch / modified starch	0.044 kg
9. (a) Fuel for power generation for mills having spinning, weaving and processing activities (raw cotton as raw material) Naphtha OR	1.22 kg
SKO OR	1.22 kg
Furnace Oil OR	0.92 litre
HSD	1.10 litre
9. (b) Fuel for power generation for mills having weaving and processing activities (cotton yarn as raw material) Naphtha OR	0.73 kgs.
SKO OR	0.73 kgs.
Furnace Oil OR	0.65 litre
HSD	0.77 litre
Note : (i) Naphtha, SKO, Furnace Oil and HSD shall be allowed only under AU condition. (ii) the above norms for fuel are applicable to units having spinning, weaving and processing activities or weaving and processing activities. Also the said units should have facilities for captive power generation using Naphtha / SKO/Furnace Oil/HSD (iii) Vat Indigo Blue Dye shall be allowed for import only when the export item is indigo blue dyed denim cloth.

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A3065	Alpha Campholenic Aldehyde	1 kg	1. Alpha Pinene OR	1.654 kg
1. Gum Turpentine Oil containing Alpha Pinene 82.5%	2.00 kg
A3066	Di-hydro Myrcene	1 kg	1. Alpha Pinene OR	1.691 kg
1. Gum Turpentine Oil containing Alpha Pinene 82.5%	2.073 kg
A3067	MDEA-P (Blended mixture of methyl Diethanolamine and Piperazine containing Piperazine 20 + 1%	1 kg	1. Piperazine	0.210 kg
A3068	Catalyst 59-5/59-5M containing ZnO 36%, and Na2O - 17%, Al2O3 - 30%	1 kg	1. Zinc Carbonate	0.616 kg
2. Sodium by carbonate	0.511 kg
3. Alumina Trihyderate	0.480 kg
4. Atta Gel	0.154 kg
A3069	Ferric Chloride	1 MT	1. Furnace Oil	0.035 MT
A3070	Fluorescent Pigment Green HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Solvent Dyes	0.030 kg
A3071	Fluorescent Pigment Magenta HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.035 kg
A3072	Fluorescent Pigment Chrome HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.006 kg
5. Solvent Dyes	0.028 kg
A3073	Fluorescent Pigment Orange HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.014 kg
5. Solvent Dyes	0.037 kg
A3074	Fluorescent Pigment Pink HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.026 kg
A3075	Fluorescent Pigment Red HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.026 kg
5. Solvent Dyes	0.009 kg
A3076	Fluorescent Pigment Red Orange HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.017 kg
5. Solvent Dyes	0.025 kg
A3077	Fluorescent Pigment Blue HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.032 kg
A3078	Fluorescent Pigment Violet HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Basic Dyes	0.011 kg
A3079	Fluorescent Pigment Yellow HTPB (Polyamide Matrix content 95%)	1 kg	1. Isophorone Diamine	0.363 kg
2. Isophthalic Acid	0.430 kg
3. Optical Brightner	0.001 kg
4. Solvent Dyes	0.039 kg
A3080	Fluorescent Pigment Chrome HTPA (Polyester Matrix content 95%)	1 kg	1. Melamine	0.102 kg
2. Optical Brightner	0.001 kg
3. Basic Dyes	0.010 kg
4. Solvent Dyes	0.028 kg
A3081	Fluorescent Pigment Green HTPA (Polyester Matrix content 95%)	1 kg	1. Melamine	0.102 kg
2. Optical Brightner	0.001 kg
3. Solvent Dyes	0.027 kg
A3082	Fluorescent Pigment Orange HTPA (Polyester Matrix content 95%)	1 kg	1. Melamine	0.102 kg
2. Optical Brightner	0.001 kg
3. Basic Dyes	0.019 kg
4. Solvent Dyes	0.030 kg
A3083	Fluorescent Pigment Pink HTPA (Polyester Matrix content 95%)	1 kg	1. Melamine	0.102 kg
2. Optical Brightner	0.001 kg
3. Basic Dyes	0.052 kg
A3084	Fluorescent Flushed Ink concentrate-Lemon Yellow (Amino Sulphonamide content 47%)	1 kg	1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)	0.322 kg
2. Melamine	0.090 kg
3. Para Formaldehyde	0.140 kg
4. Optical Brightner	0.001 kg
5. Solvent Dyes	0.028 kg
A3085	Fluorescent Flushed Ink concentrate-Magenta (Amino Sulphonamide content 47%)	1 kg	1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)	0.322 kg
2. Melamine	0.079 kg
3. Para Formaldehyde	0.127 kg
4. Optical Brightner	0.001 kg
5. Basic Dyes	0.031 kg
6. Solvent Dyes	0.001 kg
A3086	Fluorescent Flushed Ink concentrate-Fire Orange (Amino Sulphonamide content 47%)	1 kg	1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)	0.322 kg
2. Melamine	0.079 kg
3. Para Formaldehyde	0.122 kg
4. Optical Brightner	0.001 kg
5. Basic Dyes	0.012 kg
6. Solvent Dyes	0.043 kg
A3087	Fluorescent Flushed Ink concentrate-Pink (Amino Sulphonamide content 47%)	1 kg	1. Ortho-Para Toluene Sulphonamide/ Para Toluene Sulphonamide (OTPT/ PTS Amide)	0.322 kg
2. Melamine	0.079 kg
3. Para Formaldehyde	0.122 kg
4. Optical Brightner	0.001 kg
5. Basic Dyes	0.023 kg
6. Solvent Dyes	0.001 kg
A3088	Reactive Blue 221 (Reactive Blue BRX)	1 kg	1. Cyanuric Chloride	0.187 kg
2. N-Ethyl Meta Base Ester	0.310 kg
A3089	Disperse Yellow SBL RG2 (Disperse Yellow 86)	1 kg	1. Para Phenetidine	0.480 kg
2. Ortho Nitro Chloro Benzene (ONCB)	0.650 kg
A3090	Raney Nickel Catalyst (Activated suspended in water) Nickel content : 92-96% Aluminium content 4-6%	1 kg (on dry basis)	1. Nickel Metal	1.00 kg
2. Aluminium Metal	1.0 kg
3. Caustic Soda	2.50 kg
A3091	Aminosol P 40 (Blended mixture of Methyl Diethanolamine and Piperazine containing Piperazine 40 + 1%	1 kg	1. Piperazine	0.420 kgs
A3092	Lisinopril	1 kg	1. L-Proline	0.927 kg
2. Trifluoro Acetic Acid	1.26 kg
3. Methylene Chloride	10.77 kg
4. Acetone	0.482 kg
5. Methanol	5.60 kg
6. Toluene	6.17 kg
7. Tetra Hydofuran	0.616 kg
8. Isopropyl Alcohol	4.27 kg
9. Activated Carbon	0.100 kg
10.Benzyl Chloroformate	1.30 kg
11.5% Palladium on Charcoal	0.011 kg
12.Pivaloyl Chloride	0.584 kg
13.Potassium Carbonate	0.789 kg
14.Raney Nickel Catalyst	0.100 kg
15.Triethylamine	0.536 kg
16.Di Iso Propyl Ether	1.92 kg
17.L-Lysine Hcl	1.545 kg
18.Magnesium Metal	0.214 kg
19.Cyclohexane	0.177 kg
A3093	Phenocyanol	1 kg	1. Meta Phenoxy Benzaldehyde	0.861 kg
2. Sodium Cyanide	0.288 kg
3. Iso Propyl Ether	0.137 kg
A3094	Diacetyl Acyclovir	1 kg	1. Guanine OR	0.60 kg
a) Ethyl Cyano Acetate	0.80 kg
b) Guanidine Nitrate	0.90 kg
c) Sodium Metal	0.35 kg
OR Sodium Methoxide	0.82 kg
d) Formic Acid	1.62 kg
e) Sodium Nitrite	0.40 kg
f) Formamide	0.25 kg
2. 1,3 Dioxalane	0.50 kg
3. Benzyl Toluene	0.50 kg
4. Dimethyl Acetamide	1.10 kg
A3095	Sterile Ceftazidime	1 kg	1. T.A. E. M.	1.573 kg
2. Acetone	4.32 kg
3. Hexamethyl Disilane	1.707 kg
4. Iodine	2.50 kg
5. Isopropyl Alcohol	3.52 kg
6. Methylene Chloride	2.23 kg
7. Methanol	2.216 kg
8. Pyridine	1.89 kg
9. Activated Carbon	0.071 kg
10.Sterile Sodium Carbonate	0.093 kg
11.Triethyl Amine	0.069 kg
12.Formic Acid (98%)	3.70 kg
13.Formic Acid (85%)	0.211 kg
14.Caustic Soda	4.302 kg
15.7 ACA	1.08 kg
A3096	Phenazone BP/EP	1 kg	1. 1-Phenyl-3-Methyl-5-Pyrazolone	1.32 kg
2. Isopropyl Alcohol	0.50 kg
A3097	Flutamide	1 kg	1. 3-Amino Benzo Tri Fluride	1.457 kg
2. Iso Butyryl Chloride	1.08 kg
3. N-Heptane/ Heptane	1.00 kg
4. Toluene	0.48 kg
A3098	Meta Nitro Para Toluidine	1 kg	1. Para Toluidine	1.032 kg
2. Acetic Acid	0.624 kg
3. Acetic Anhydride	0.147 kg
A3099	Phenyl Proanolamine Hcl	1 kg	1. Propiophenone	1.91 kg
2. Methanol	0.50 kg
3. Acetone	0.56 kg
4. Isopropyl Alcohol	1.25 kg
5. Toluene	1.08 kg
A3100	N-Cyano Ethyl Aniline	1 kg	1. Aniline Oil	0.680 kg
2. Acrylonitrile	0.440 kg
A3101	Lake Erythrosine (Dye content as Erythrosine = 52%) (C.I. No. 45430:1)	1 kg	1. Resorcinol	0.345 kg
2. Phthalic Anhydride	0.232 kg
3. Iodine	0.721 kg
4. Acetic Acid Glacial	0.733 kg
5. Caustic Soda	0.257 kg
6. Aluminium Hydroxide	0.603 kg
7. Aluminium Chloride	0.131 kg
A3102	Anticorrosion VCI Wrapping Paper of GSM 200-225 having a Coating Weight of VCI 0.035 kg/Sq.Metre.	1 Sq. Meter	1. HDPE Laminated Paper of relevant GSM	1.02 Sq. Metre
2. VCI Concentrate	Net content + 2% wastage
A3103	Nickel Catalyst (Ni content 22.5 + 1%) Hydrogenated Vegetable Oil content (60 + 2%)	1 kg	1. Nickel Metal/ Nickel sulfate/spent Nickel catalyst (100%) Nickel basis)	0.236 kg
2. RBD Vegetable Oil OR	0.638 kg
2. Hydrogenated Vegetable Oil	0.638 kg
3. Soda Ash	0.800 kg
A3104	Permanent Marker Ink/ White Board Marker Ink In consumer pack up to 60 ml	1 kg	1. Permanent Marker Ink/ White Board Marker Ink In Bulk of relevant technical specification	1.01 kg
A3105	Chlorinated Paraffin Wax (40-45% Chlorine content)	1 kg	1. Paraffin (C10-C30)	0.660 kgs
2. Chlorine	0.880 kg
3. Relevant Stabilizer	0.010 kgs
A3106	Chlorinated Paraffin Wax (46-50% Chlorine content)	1 kg	1. Paraffin (C10-C30)	0.605 kgs
2. Chlorine	0.990 kgs
3. Relevant Stabilizer	0.010 kgs
A3107	Chlorinated Paraffin Wax (51-55% Chlorine content)	1 kg	1. Paraffin (C10-C30)	0.550 kgs
2. Chlorine	1.10 kgs
3. Relevant Stabilizer	0.010 kgs
A3108	Chlorinated Paraffin Wax (56-60% Chlorine content)	1 kg	1. Paraffin (C10-C30)	0.495 kgs
2. Chlorine	1.22 kgs
3. Relevant Stabilizer	0.010 kgs
A3109	Chlorinated Paraffin Wax (61-65% Chlorine content)	1 kg	1. Paraffin (C10-C30)	0.440 kgs
2. Chlorine	1.34 kgs
3. Relevant Stabilizer	0.010 kgs

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1824	Lead Cored Wire	1 kg	1. Lead Ingots	1.02 kg/kg content in export product
2. CRCA Steel Strips	1.01 kg/kg content in export product
C1825	Frame Assembly, (Exhaust frame for Steam Turbine Generator)	1 No. (34.4 MT)	1. Non Alloy Steel Plates	1.20 kg/kg content in export product
2. Relevant Steel Forgings/ Components Flanges, Rings, Segmental Rings, Bars	Net to Net
3. Stainless Steel Sheets/ Plates	1.05 kg/kg content in export product
4. Relevant Castings	Net to Net
5. Relevant Studs/Nuts/ Bolts/Screws/Pins/ Dowels Adapters/ Connectors/Washer Springs	Net to Net
6. Gaskets	Net to Net
7. Wire Inserts	Net to Net
8. Insulation Material	1.02 Sq.Mtr./ Sq.Mtr. content in the export product
9. Insulation Paper	1.02 Sq.Mtr. / Sq.Mtr. content in the export product
10. Welding Electrodes/ Wires (In Straight Lengths/Coils/Spools)	2% of net weight of Steel to be welded
11. Welding Flux	0.5% of net weight of Steel to be welded

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
E108	Table Eggs	1000 Nos.	1. Di-Calcium Phosphate	1.85 kg
2. Pigment/Color viz. Beta-Carotene 10%, 20%, 30% Carophyll Red/ Yellow	0.74 kg
3. Antibiotics and Coccidiostats viz. Neomycin, Tylosin, Auromycin, Amprolium, their salts and compounds	0.37 kg
4. Premix Vitamin supplements (including Calcium Di-Pantothenate 45%)	0.25 kg
5. Packing material (Card Board & Chromo paper)	Net+5% wastage
Note 1.a) Pure medicines should not exceed 20% of the total weight of medicine in case of import item No. 3. b) In case of import item No. 4, pure vitamins should not exceed 50% of the total premix weight and the vitamin premix should contain a mixture of two or more vitamins.
E109	Fresh Fruits and Vegetables	1 kg	1. Corrugated Boxes	Net + 1% wastage
2. EPS Moulded Boxes	Net + 1% wastage
3. BOPP Self Adhesive Tapes	1.05 kg/kg of the weight of BOPP Self Adhesive Tapes
4. Relevant Wrapping Papers of relevant GSM ( + 10%)	1.05 kg/kg of the weight of relevant wrapping paper of relevant GSM ( + 10%)
5. HDPE/LDPE/PP Bags	1.01 kg/kg of the weight of relevant packing material
6. Relevant Plastic Box Strapping Rolls	1.05 kg/kg of the weight of relevant packing material

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H508	Self Adhesive Tear tape/ Tear Off Ribbon width 1.00 mm-9.00 mm minimum length 1000 meters	1 kg	1. MOPP/ BOPP Film	0.830 kg
2. Acrylic Synthetic Emulsion/ Water Based Adhesive (Solid content 55% + 10%)	0.640 kg
3. Release Coat	0.016 kg
OR
1. Pancakes of Self Adhesive tear Tape/ Tear Off Ribbon (width range 25.1 mm-1050 mm)	1.07 kg
2. Relevant Bobbin	Net to net
H509	Printed / Design Self Adhesive Tear Tape/ Tear Off Ribbon width 1.00 mm-9.00 mm minimum Length 1000 meters	1 kg	1. MOPP/ BOPP film	0.835 kg
2. Acrylic Synthetic Emulsion / Water Based Adhesive (Solid content 55% + 10%)	0.645 kg
3. Release Coat	0.017 kg
4. Printing Ink (Solid content 40% + 10%)	0.077 kg
5. Additive	0.007 kg
6. Thinner	0.039 kg
OR
1. Pancakes of Printed / Design Self Adhesive Tear Tape/ Tear Off Ribbon (width Range 25.1 mm-1050 mm)	1.09 kg
2. Relevant Bobbin	Net to net
H510	Plain Self Adhesive Tear Tape / Tear Off Ribbon width 9.1 mm-25.00 mm minimum Length 1000 meters	1 kg	1. MOPP/ BOPP Film	0.816 kg
2. Acrylic Synthetic Emulsion / Water Based Adhesive (Solid content 55% + 10%)	0.627 kg
3. Release Coat	0.016 kg
H511	Pancakes of Self Adhesive Tear Tape/ Tear Off Ribbon width 25.1 mm-1050 mm	1 kg	1. MOPP/ BOPP Film	0.775 kg
2. Acrylic Synthetic Emulsion/ Water Based Adhesive (Solid content 55% + 10%)	0.595 kg
3. Release Coat	0.015 kg
H-512	PVC Sole for Hawai Chappal (without Filler)	1 kg	1. PVC Resin (Suspension Grade)	0.752 kg
2. Di-octyl Phthalate Plasticizer (DOP)	0.280 kg
3. Di-iso-Decyl Phthalate Plasticizer (DIDP)	0.032 kg
4. Lead Stabilizer	0.011 kg

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
I39	Football/Soccer Ball Size X S (Extra Small)	1 No.	1. Relevant PVC/PU Leather Cloth	0.08 Sq.mtr.
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM	0.08 Sq.mtr. per relevant layer
3. Cotton Fabric of Relevant GSM	0.08 Sq.mtr. per relevant layer
4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%)	10 Gms per relevant layer
5. Relevant Butyl Bladder / Latex Bladder / PU Bladder	1.02 Nos.
6. Thread	8 mtrs.
7. Ink	1 gm
8. Thinner	0.25 gm
9. Hardener	0.25 gm
I40	Football/Soccer Ball Size 1	1 No.	1. Relevant PVC/PU Leather Cloth	0.13 Sq. mtr.
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM	0.13 Sq.mtr. per relevant layer
3. Cotton Fabric of Relevant GSM	0.13 Sq. mtr. per relevant layer
4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%)	13 gm per relevant layer
5. Relevant Butyl Bladder / Latex Bladder / PU Bladder	1.02 Nos.
6. Thread	9 mtrs.
7. Ink	2 gm
8. Thinner	0.5 gm
9. Hardener	0.5 gm
I41	Football/Soccer Ball Size 2	1 No.	1. Relevant PVC/PU Leather Cloth	0.15 Sq. mtr.
2. Relevant Polyester Viscose Fabric/ Polyester Fabric of Relevant GSM	0.15 Sq.mtr. per relevant layer
3. Cotton Fabric of Relevant GSM	0.15 Sq. mtr. per relevant layer
4. Adhesive PU/Rubber based solvent content 75 + 10% / Natural Latex (DRC 60% + 1%)	15 gm per relevant layer
5. Relevant Butyl Bladder / Latex Bladder / PU Bladder	1.02 Nos.
6. Thread	10 mtrs.
7. Ink	2.5 gm
8. Thinner	0.5 gm
9. Hardener	0.5 gm

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password

Register now Free ? Forgot Password ?

Follow us on :