Attention is invited to Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended and Paragraphs 4.9 and 4.10 of the Handbook of Procedures, Vol.1, 2002-2007, as amended and also to the Handbook of Procedures, Vol.2, 2002-2007, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 2.4 of the Export and Import Policy 2002-2007, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 2002-2007, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 2002-2007, as amended, amendments/ corrections/ deletion at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
After the existing entry at Sl.No.A-2980, the new entries at Sl.No.A-2981 to A-2990 shall be added as per Annexure ”B” to this Public Notice.
After the existing entry at Sl.No.C-1769, the new entries at Sl.No.C-1770 to C-1774 shall be added as per Annexure ”C” to this Public Notice.
After the existing entry at Sl.No.E-106, the new entry at Sl.No.E-107 shall be added as per Annexure ”D” to this Public Notice.
5. This issues in public interest.
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(B. GANGAR)
DY. DIRECTOR GENERAL OF FOREIGN TRADE
FOR DIRECTOR GENERAL OF FOREIGN TRADE
Annexure “A” to the
Public Notice No.15
Dated: 04/06/2002
| Sl. No. | Page No. | Reference | Amendments/Corrections |
|---|
| 1 | 2 | 3 | 4 |
|---|
| 1. | 109 | Chemicals & Allied Products Sl.No.A771 | After import item at Sl. No. 2, the following import item (with quantity) shall be added:- |
| “3. Sodium Nitrite | 0.387 kg” |
| 2. | 151 | Chemicals & Allied Products Sl.No.A1136 | The description of import item at Sl. No. 1, shall be amended (without any change in quantity) to read as under:- |
“1. Nickel Oxide (Ni+Co76.5%)
OR
Crude Nickel Sulphate containing 22.5% Nickel Metal” | 0.325 kg |
| 3. | 227 | Chemicals & Allied Products Sl.No.A1775 | The description of export item shall be amended to read as under:-
“Chlorinated Paraffin Wax (Chlorine content 40% to 50%)” |
| 4. | 227 | Chemicals & Allied Products Sl.No.A1776 | The description of export item shall be amended to read as under:-
“Chlorinated Paraffin Wax (Chlorine content 50% to 60%)” |
| 5. | 227 | Chemicals & Allied Products Sl.No.A1777 | The description of export item shall be amended to read as under:-
“Chlorinated Paraffin Wax (Chlorine content 60% to 65%)” |
| 6. | 278 | Chemicals & Allied Products Sl.No.A2175 | The description of export item shall be amended to read as under:-
“POTASSIUM HYDROXIDE (MIN. 88%)-0.402 Kg.” |
| 7. | 280 | Chemicals & Allied Products Sl.No.A2187 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A2187 | 4.4” Thiodiphenol (99%) | 1 kg | 1. Phenol | 1.850 kg |
| 2. Sulphur Dichloride | 0.550 kg |
| 3. Toluene | 0.910 kg |
| 4. Methanol | 0.800 kg |
| 8. | 331 | Chemicals & Allied Products Sl.No.A2590 | After the import item at Sl. No. 2, the following import item shall be (with quantity) added:- |
| “3. Ethyl Formate | 1.51 kg” |
| 9. | 334 | Chemicals & Allied Products Sl.No.A2624 | The norm covered by this entry shall be deleted. |
| 10. | 343-344 | Chemicals & Allied Products Sl.No.A2713 | The description of import item at Sl. No. 2, shall be amended (without any change in quantity) to read as under:-
“Synthetic Rubber EPDM including (Reprocessed)/ SBR-1502/1712/PBR” |
| 11. | 356 | Chemicals & Allied Products Sl.No.A2813 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| A2813 | Tetanus Antitoxin BP 3000 IU/2ML in Vial. | 1 Lac Vials | 1. Tetanus Antitoxin 4000IU/ML | 95.25 Ltrs. |
| 2. Glass Vials | 115,000 Nos |
| 3. Aluminum Caps/Seals | 110,000 Nos |
| 4. Rubber Stoppers | 110,000 Nos |
| 5. Shipping Indicators | 350 Nos |
| 12. | 359 | Chemicals & Allied Products Sl.No.A2841 | 1. The quantity of import item at SL. No. 2 shall be amended to read as under:-
“2.260 kgs”
2. The description of import item at Sl. No. 3, (with quantity) shall be deleted. |
| 13. | 499 | Engineering Product Sl.No.C151 | After the description of import items at Sl. No. 5, the following import items (with quantity) shall be added:- |
| “6. Brass Rod | 1.1 kg/kg content in the export product |
| 7. Silver Epoxy and Epoxy Resin | CIF value of these item together shall be restricted to 1% of FOB” |
| 14. | 556 | Engineering Product Sl.No.C362 | The description of export item shall be amended to read as under:-
“Casing Pipes of OD 114.30 mm to 508 mm equivalent to 4 ½ ” OD to 20” OD.” |
| 15. | 556-557 | Engineering Product Sl.No.C366 | The description of import item at Sl. No. 4 shall be amended (without any change in quantity) to read as under:-
“Hard Banding Material, such as, Tungsten Carbide, ARMACOR-M ARNCO 200 XT (Optional)” |
| 16. | 564-565 | Engineering Product Sl.No.C397 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| C397 | Thermostatic type Bimetal/Trimetal Strip of Various Grades | 1 kg | 1. Controlled Expansion Alloys:
Cold Rolled Strips of maximum thickness of 1.85 mm and minimum thickness of 1.27 mm and 73 mm width.
a) HE Alloys: | |
| 1. Alloy with 20% Nickel, 6% manganese and balance ferrous | 1.10 kg/kg content in the export product |
| 2. Alloy with 22% nickel, 4% chrome and balance ferrous | 1.10 kg/kg content in the export product |
| 3. Alloy with 72% manganese, 10% Nickel and 18% Copper | 1.10 kg/kg content in the export product |
b) L.E. Alloys:
1. Alloy with 36% Nickel and balance Iron | 1.10 kg/kg content in the export product |
| 2. Alloy with 42% Nickel and balance ferrous | 1.10 kg/kg content in the export product |
| 3. Alloy with 48% Nickel and balance ferrous | 1.10 kg/kg content in the export product |
| 4. Relevant Grade of Stainless Steel | 1.10 kg/kg content in the export product |
| 5. Nickel | 1.10 kg/kg content in the export product |
| 6. Copper | 1.10 kg/kg content in the export product |
| 17. | 588-589 | Engineering Products Sl.No.C482 | 1. The description of import item at Sl. No. 3(i)(e) shall be corrected (with quantity) to read as under:- |
| ‘3(i)(e). Calcium Silicide (CaSi)” | 1.5 kg |
| 2. The description of import item as Sl. No. 3(iii)(e) shall be corrected (with quantity) to read as under:- |
| 3(iii)(e). Alumina Based Refractories for Iron and Steel Ladles” | 1.25 kg |
| 18. | 603-604 | Engineering Products Sl.No.C512 | 1. The description of import item at Sl. No. 3(i)(e) shall be corrected (with quantity) to read as under:- |
| ‘3(i)(e). Calcium Silicide (CaSi)” | 1.5 kg |
| 2. The description of import item as Sl. No. 3(iii)(e) shall be corrected (with quantity) to read as under:- |
| 3(iii)(e). Alumina Based Refractories for Iron and Steel Ladles” | 1.25 kg |
| 19. | 622-623 | Engineering Product Sl.No.C564 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| C564 | Bimetallic Type Spark plug | 2 lakh Nos. | A. RAW MATERIALS:
1. Calcite Powder | 144.50 kgs |
| 2. Calcined Alumina | 3701.86 kgs |
| 3. Steiron Talc | 31.50 kgs |
| 4. Green Pigment | 0.62 kg |
| 5. Active Bentonite | 0.40 kg |
| 6. Adhesive | 2.00 kgs |
| 7. Dextrin | 0.40 kg |
| 8. Fusing Glass | 50.80 kgs |
| 9. Carbonyl Iron Powder | 36.36 kgs |
| 10. Melt Mullite | 20.00 kgs |
| 11. Fine Graphite Powder | 10.98 kgs |
| 12. Inscription Script Green | 0.40 kg |
| 13. Nickel Alloy Round/ Profile Wire | 90.64 kgs |
| 14. Nickel Squares/ Anodes | 34.00 kgs |
| 15. Nickel Sulphate | 112.00 kgs |
B. COMPONENTS:
1. Bi-Metal Electrode | Net to Net |
| 2. Electrode Shank | Net to Net |
| 3. Washer/Gasket | Net to Net |
| 4. Sealing Washer | Net to Net |
| 5. Terminal Cap/Nut | Net to Net |
| 6. Sealing Washer/Ring | Net to Net |
7. Housing
OR | Net to Net |
| 7. Cold Heading/ Extruding/ Forging Steel Rounds/ Bars/ Coils and Rods of Dia 13 mm to 19.6 mm | 9178.33 kgs |
| 8. Insulator | 1 No./ unit (Net to Net) |
| 9. Resister | 1 No./ unit (Net to Net) |
| 10. Spring | 1 No./ unit (Net to Net) |
C. MISC. ITEMS:
1. Molykote “G” Rapid Spray
2. Silver Anode
3. Silver 1M Salt
4. Special HSS Drills
5. Inscription Strips
6. Grinding Mandrels
7. Thread Chasers/ Thread Rolling Jaws
8. Electrode Disc. Blanks
9. Grinding Wheels
10. Inscription Ring
11. Pressing Pins
12. Stamp Head
13. Welding Electrodes
14. Form Sinkers
15. Carbide Tips/ inserts/ Ceramic Inserts
16. Punches
17. Shear Blade
18. Sillment Powder (198 kgs)
19. Activator (9.9 kg)
20. Epoxy Resin (26 kg) | Upto 2% of FOB value of export |
| Note: 1. Import item viz insulator mentioned at Sl. No. 8 of Components shall be allowed for import in lieu of Import items at Sl. No. 1 to 12 of Raw Material. |
| 20. | 657 | Engineering Product Sl.No.C829 | The quantity of import item at Sl. No. 1 shall be corrected to read as under:-
“988 kg” |
| 21. | 738 | Engineering Product Sl.No.C1154 | The norm covered by this entry shall be deleted. |
| 22. | 738 | Engineering Product Sl.No.C1155 | The norm covered by this entry shall be deleted. |
| 23. | 738- 739 | Engineering Product Sl.No.C1156 | The norm covered by this entry shall be deleted. |
| 24. | 739 | Engineering Product Sl.No.C1157 | The norm covered by this entry shall be deleted. |
| 25. | 756 | Engineering Product Sl.No.C1291 | The quantity against import item at Sl. No. 6, shall be added as under:-
“The CIF value of all these items taken together is restricted to 6% of the FOB value” |
| 26. | 756 | Engineering Product Sl.No.C1292 | The quantity against import item at Sl. No. 6, shall be added as under:-
“The CIF value of all these items taken together is restricted to 6% of the FOB value” |
| 27. | 773-774 | Engineering Product Sl.No.C1363 | The note No. 2, below this entry shall be deleted. |
| 28. | 860 | Engineering Product Sl.No.C1695 | 1. The quantity of import item at Sl. No. 8, shall be corrected to read as under:-
“0.0051 kg”
2. After the description of import item at Sl. No. 9, the following import items (with quantity) shall be added:- |
| “10. Self Soldering enameled copper wire | 0.5406 kg |
| 11. Mylar Polyester Film | 0.0081 kg” |
| 29. | 861 | Engineering Product Sl.No.C1699 | 1. The description of import item at Sl. No. 2, shall be amended (without any change in quantity)to read as under:-
“Transformer (KB 10)”
2. The description of import item at Sl. No. 19, shall be amended (without any change in quantity)to read as under:-
“Transistor Power 2 S D965”
3. The description of import item at Sl. No. 20, shall be amended (without any change in quantity) to read as under:-
“Lubricomp PDX-D-5373 KOD BK8 115”
4. The description of import item at Sl. No. 21, shall be amended (without any change in quantity)to read as under:-
“SS Strip .007”x1.25” T 301 ½ H”
5. The description of import item at Sl. No. 23, shall be amended (without any change in quantity)to read as under:-
“SS 0.008” x 1.65” CT 301 ½ H” |
| 30. | 878 | Engineering Product Sl.No.C1765 | The description of export item shall be amended to read as under:-
“Dacrotised or other equivalent surface coated high tensile precision fastners Cold/Hot Forged Bolts/Screws All varieties” |
| 31. | 878 | Engineering Product Sl.No.C1766 | The description of export item shall be amended to read as under:-
“Dacrotised or other equivalent surface coated high tensile precision fastners Cold/Hot Forged Nuts All varieties” |
| 32. | 1022 | Plastic Products Sl.No.H-334 | 1. The description of import item at Sl. No. 1, shall be amended (without any change in quantity) to read as under:-
“UHMWPE Powder” |
| 33. | 1026 | Plastic Products Sl.No.H-358 | 1. The description of export item shall be amended to read as under:-
“Thermo Plastic Rubber Sole”
2. The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-
“TPR Granules or Styrene Butadiene Styrene Oil Bound Copolymer or SBS Oil Bound Copolymer” |
| 34. | 1039 | Plastic Products Sl.No.H-433 | 1. The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-
“Cellulose Acetate Moulding Powder or Cellulose Acetate Granules” |
| 35. | 1099 | Textile Product Sl.No.J-205 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Export Item | Qty. | Import Item | Qty. Allowed |
|---|
| J-205 | Made-ups of Grey Cotton Fabrics | 1 kg | 1. Grey Cotton Fabrics
OR | 1.02 kg/kg content in the export product |
| 1. Raw Cotton | 1.195 kg/kg content in the export product |
| 36. | 1115 | Textile Product Sl.No.J-327 | The following note No.1 below this entry shall be added:-
‘Note-1. The exporter at the time of exports will supply a sample of grey and processed fabric to the Customs Authority supported by a Certificate issued from the testing laboratories of the Textile Committee/ Man made Textiles Research Association (MANTRA) / Silk & Artsilk Mills Research Association (SASMIRA), Bombay / Bombay Textiles Research Association (BTRA), Bombay / Southern India Textiles Research Association (SITRA),Coimbatore/ Ahmedabad Textiles Industries research Association (ATIRA), Ahmedabad or any other institution recognised by the Government of India for this purpose.” |
| 37. | 1137 | Miscellaneous Products Sl.No.K107 | The quantity of import item at Sl. No. 4 shall be corrected to read as under:-
“upto 4% of FOB value of exports” |
| 38. | 1142 | Miscellaneous Products Sl.No.K135 | 1. The description of export item shall be amended to read as under:-
“Rubber Backed Polypropylene Non-woven/ woven Door Mat”
2. The description of import item at Sl. No. 1, shall be amended to read as under:-
“Relevant Polypropylene floor covering” |
| 39. | 5-6 (vol-2 Part-I) & (v)–(vi) (Vol-2 Part-II) | GENERAL NOTE FOR FUEL | After Sl. No. 13 of the General Note for Fuel, the following shall be added:- |
| 14. Organic Chemicals | 4% |
| 15. Inorganic Chemicals | 3% |
| 16. Glass Artwares | 3% |