Public Notice No. 38 (Re-2000)/1997-2002 dated the 1st November, 2000

Input-Output Norms Further Added/Amended

Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.

2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.

3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A” to this Public Notice shall be made.

4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS

After the existing entry at Sl.No.A-2475, the new entries from Sl.No.A-2476 to A-2482 shall be added as per Annexure ”B” to this Public Notice.

ENGINEERING PRODUCTS

After the existing entry at Sl.No.C-1548, the new entries from Sl.No.C-1549 to A-1574 shall be added as per Annexure ”C” to this Public Notice.

FOOD PRODUCTS

After the existing entry at Sl.No.E-80, the new entry Sl.No.E-81 shall be added as per Annexure ”D” to this Public Notice.

PLASTIC PRODUCTS

After the existing entry at Sl.No.H-421, the new entries Sl.No.H-422 to H-423 shall be added as per Annexure ”E” to this Public Notice.

TEXTILE PRODUCTS

After the existing entry at Sl.No.J-331, the new entries from Sl.No.J-332 to J-333 shall be added as per Annexure ”F” to this Public Notice.

5. This issues in public interest.

Sd/-
(N.L. Lakhanpal)
Director General of Foreign Trade

Issued by:
Government of India
Ministry of Commerce & Industry
Department of Commerce, New Delhi

(F.No. 01/85/44/19/AM2001/DES-VI)

Annexure “A”

AMENDMENTS/CORRECTIONS

Sl. No.	Page No.	Reference	Amendments/Corrections
1	2	3	4
1.	35	Chemicals & Allied Products Sl.No.A175	The description of import item at Sl. No. 1 shall be amended to read as under:- “Propiophenone”.
2.	46	Chemicals & Allied Products Sl.No.A264	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A264	Ibuprofen (Neopentyl Glycol route)	1 kg	1. Isobutyl Benzene 2. Propionic Acid OR 2. a) 2-Chloro propionic Acid b) Thionyl Chloride OR 2. 2-Chloropropionyl Chloride 3. Neopentyl Glycol 4. Methylene Chloride/ Ethylene Dichloride/ Methanol	0.952 kg 0.897 kg 0.897 kg 1.07 kg 0.923 kg 0.89 kg 1.00 kg

3.

46

Chemicals & Allied Products Sl.No.A265

The norm covered by this entry shall be substituted by

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A265	Ibuprofen (Nickel Sodium Cyanide Route)	1 kg	1. Isobutyl Benzene 2. Acetyl Chloride 3. Sodium Cyanide 4. Tetra Butyl Ammonium Bromide 5. Nickel Metal 6. Isopropyl Alcohol/ Methanol/ Methylene Chloride	0.952 kg 0.875 kg 0.809 kg 0.071 kg 0.042 kg 1.00 kg

4.

46

Chemicals & Allied Products Sl.No.A266

The norm covered by this entry shall be substituted by

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A266	Ibuprofen (Sodium Metal Route)	1 kg	1. Isobutyl Benzene 2. Acetyl Chloride OR Acetic Acid 3. Sodium Metal 4. a) Monochloro Acetic Acid b) Isopropyl Alcohol OR 4. Isopropyl Chloro Acetate 5. Isopropyl Alcohol/Acetone	0.952 kg 0.714 kg 0.952 kg 0.285 kg 1.25 kg 0.952 kg 1.80 kg 1.00 kg

5.	161	Chemicals & Allied Products Sl.No.A1250	The description of export item shall be amended to read as under:- “Liner Alkyl Benzene Sulphonic Acid”.
6.	201	Chemicals & Allied Products Sl.No.A1637	The quantity of import item at Sl. No. 1 shall be amended to read as under:- “0.952 kg”.
7.	217-218	Chemicals & Allied Products Sl.No.A1701	The following Note 2 shall be added below this norm:- “Note: 2. Within the total quantity of Natural/ Synthetic Rubber (SBR 1502/ 1712) at Sl. No. 1 of the SION, PBR shall be allowed upto 0.170 kg”.
8.	263	Chemicals & Allied Products Sl.No.A1969	The quantity of import item at Sl. No. 1 shall be amended to read as under:- “0.816 kg”.
9.	269	Chemicals & Allied Products Sl.No.A2016	The norm covered by this entry shall be deleted.
10.	269	Chemicals & Allied Products Sl.No.A2017	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2017	Cefradine	1 kg	1. 7-ADCA OR Raw materials for 7-ADCA as per Sl. No. A-35 2. Hexamethyl Disilazane 3. Trimethyl Chlorosilane OR Trimethyl Guanidine 4. a) D(-) Dihydro Phenyl Glycine Base b) Methyl Aceto Acetate OR 4. D(-) Dihydro Phenyl Glycine Dane salt 5. Ethyl Chloroformate OR 5. a) 2,6 Lutidine b) Pivalyl Chloride 6. DMF Acetone 7. Activated Carbon	0.715 kg 0.198 kg 0.25 kg 0.706 kg 0.615 kg 1.06 kg 0.425 kg 0.03 kg 0.417 kg 2.85 kg 0.032 kg

11.	270-271	Chemicals & Allied Products Sl.No.A2024	After import item at Sl. No. 8 the following items (with quantity) shall be added:-
			“9.	Dimethyl Carbonate	2.25 kg
			10.	2, Acetonitrile	1.62 kg”.
12.	278	Chemicals & Allied Products Sl.No.A2090	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2090	Benzyl Cyanides	1 kg	1. Benzyl Chloride OR Toluene 2. Sodium Cyanide 3. Soda Ash 4. Triethyl Amine	1.253 kg 1.06 kg 0.485 kg 0.019 kg 1.012 kg

13.	288	Chemicals & Allied Products Sl.No.A2155	The norms covered by this entry shall be deleted.
14.	291-292	Chemicals & Allied Products Sl.No.A2182	The description of import item at Sl. No. 7 (with quantity) shall be amended to read as under:- “7. Ethyl Acetate-4.50 kg OR Methyl Isobutyl Ketone (MIBK) - 3.754 kg”.
15.	296	Chemicals & Allied Products Sl.No.A2211	The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- “1. Caustic Soda - 0.467 kg OR Soda ash”
16.	297	Chemicals & Allied Products Sl.No.A2217	The description of export item shall be amended to read as under:- “Choline Di-Chloride (2-Chloroethyl Trimethyl Ammonium Chloride)”.
17.	302	Chemicals & Allied Products Sl.No.A2260	1. The description of export item shall be amended to read as under:- “Cephradine Arginine Sterile” 2. The description of import item at Sl. No. 4 (without any change in quantity) shall be amended to read as under:- “L-Arginine (Pyrogen Free)”.
18.	311	Chemicals & Allied Products Sl.No.A2319	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2319	Patent Blue V C. I. No. 42051 (Dye Content 89%)	1 kg	1. Meta Hydroxy Benzaldehyde	0.435 kg

19.

314

Chemicals & Allied Products Sl.No.A2339

The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2339	Patent Blue V C. I. No. 42051 (Dye Content 89%)	kg	1. Meta Hydroxy Benzaldehyde	0.435 kg

20.	314	Chemicals & Allied Products Sl.No.A2340	After import item at Sl. No. 2 the following item (with quantity) shall be added:- “3. Twitchel Oil - 0.02 kg/kg of export product”.
21.	318	Chemicals & Allied Products Sl.No.A2373	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2373	Sterile Ceftriaxone Sodium	1 kg	1. 7-ACA 2. 2,5-Dihydro-2- Methyl-3- Mercapto-5-oxo-6-Hydroxy 1,2,4-Triazine (TAA) 3. Boron Trifluoride Gas 4. Mercapto Benzothiazole-YL-2- (2-Amino-4-Thiazole) Methoxy Imino Acetate (MAEM) OR 4. (i) 2-(2-Amino-thiuazole-4-YL- Methoxyimino Acetic Acid Anhydrous (MIATA) (ii) Thio Bis Benzo Thiazole (PERKACIT) (iii) Triphenyl Phosphine (iv) Triethyl Amine (v) Methylene Chloride 5. Triethyl Amine 6. Acetonitrile/ Dimethyl Acetamide 7.Tetrahydro Furan 8. Acetone 9. Methylene Chloride 10. Sodium Ethyl Hexanoate 11. Activated Carbon	0.668 kg 0.36 kg 0.611 kg 0.81 kg 0.57 kg 1.16 kg 0.87 kg 0.28 kg 4.00 kg 0.514 kg 2.60 kg 1.23 kg 11.50 kg 2.00 kg 0.684 kg 0.100 kg

22.	13	Chemicals & Allied Products Sl.No.A 2450 Introduced vide Public Notice No. 32 dt. 01.09.2000)	The description of export item shall be amended to read as under:- “Roxarasone USP (3-Nitro-4- Hydroxyphenylarsonic Acid)”.
23.	390-391	Electronics Products Sl.No.B-131	(i). The description of export item shall be amended to read as under:- “Telephone Instrument (Push Button Telephone) including CKD/SKD thereof ”. (ii). At the end of this entry the following Note shall be added:- “Note: Various parts of Telephone instrument when exported in CKD/SKD condition should however be covered under single shipping bill evidencing export of complete telephone instrument”.
24.	463	Engineering Product Sl.No.C252	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C252	Paper covered Rectangular/ round Copper conductors	1 kg	1. Continuous Cast Copper Rods/ Bars/ Cathodes (EC Grade) 2. Insulating Kraft Paper	1.02 kg/kg content in the export product 1.02 kg/kg content in the export product

25.	498	Engineering Product Sl.No.C362	(i). The description of export item shall be corrected to read as under:- “Casing Pipes of OD 114.30 mm to 508 mm equivalent to 2-3/8” OD to 4-1/2” OD”. (ii) The description of import item at Sl. No. 1 (without any change in quantity) shall be corrected to read as:- “1. Plain End Seamless Pipes of relevant Dia”. (iii) After import item at Sl. No. 3 the following item (with quantity) shall be added:- “4. Cross Overs - Net to Net with accountability in the export product upto a maximum of 5 Nos.”.
26.	498	Engineering Product Sl.No.C366	(i) The description of export item shall be corrected to read as under:- “Drill Pipes of OD 60.325 to 168.275 mm OD equivalent to 2-3/8” OD to 6-5/8” OD”. (ii) The description of import item at Sl. No. 1 (without any change in quantity) shall be corrected to read as:- “1. Plain End Seamless Pipes of relevant Dia”.
7.	505	Engineering Product Sl.No.C391	(i) The description of export item shall be corrected to read as under:- “Production tubing of OD 60.325 mm to 114.3 mm OD equivalent to 2-3/8” OD to 4-1/2” OD”.(ii) The description of import item at Sl. No. 1 (without any change in quantity) shall be corrected to read as:- “1. Plain End Seamless Pipes of relevant Dia”. (iii) After import item at Sl. No. 4 the following item (with quantity) shall be added:- “5. Cross Overs - Net to Net with accountability in the export product upto a maximum of 5 Nos.”.
28.	641	Engineering Product Sl.No.C978	1. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- “1. Phenol Formaldehyde Resin”.
29.	642	Engineering Product Sl.No.C981	1. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- “1. Phenol Formaldehyde Resin”.
30.	642	Engineering Product Sl.No.C982	1. The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- “1. Phenol Formaldehyde Resin”.
31.	740	Engineering Product Sl.No.C1408	(i) The description of export item shall be corrected to read as under:- “Steel Cable Drum in various sizes”. (ii) The description of import at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- “CRCA Non Alloy Steel Sheet/Coil”. (iii) The description of import item at Sl. No.2 (without any change in quantity) shall be amended to read as under:- “2. HR Non Alloy Steel Sheet/Coil”.
32.	740	Engineering Product Sl.No.C1409	The quantity of export item shall be corrected to read as under:- 1000 Kgs”
33.	6	Food Product Sl.No.E-11 as amended vide Public Notice No. 25 dt. 01/08/2000	The norm covered by this entry shall be substituted by the following:-

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
E-11	Chutneys/condiments paste/ Vegetables/ pickles packed in OTS cans/ Glass containers/ packed in relevant packing material	1 kg	1. Tin plate (OTS quality) OR Relevant Tin Containers OR Relevant Glass Containers OR Relevant packing materials namely LDPE/HDPE/ PP Granules 2. OTS cans/Tin Corrugated Board other than Ivory Board	1.10 kg/kg weight of tin packing in the export product Net +1% wastage Net +1% wastage Net to net with 1% wastage 1.05 kg/kg weight of the relevant packing material Net +1% wastage

34.

6

Textile Product Sl.No.J21 as amended vide Public Notice No. 25 dt. 01/08/2000

After import item at Sl. No. 2 the following import item (with quantity) shall be added:- “3. Raw Cotton - 1.26 kg/kg content in export product”.

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
A2476	Betamethasone 17 valerate	1 kg	1. 9,11 Epoxide 2. Butyl Ortho Valerate 3. Charcoal 4. Potassium Hydroxide 5. Acetone 6. Ethyl Acetate 7. Methylene Chloride	1.10 kg 0.96 kg 0.10 kg 3.71 kg 1.13 kg 2.50 kg 3.52 kg
A2477	DL-Naproxen	1 kg	1. Beta Naphtohol 2. Methanol 3. Acetyl Chloride 4. Nitromethane 5. Potassium Hydroxide 6. 2-Butanol 7. Hydroxyl Amine CH1 8. EDC 9. Toulene	2.50 kg 6.00 kg 1.38 kg 0.96 kg 1.73 kg 3.07 kg 1.03 kg 1.97 kg 1.64 kg
A2478	Rubber Backed/ Embedded Coir Mat, Matting/ Rugs/Carpets	1 kg	1. Natural Rubber/ Synthetic Rubber (SBR-1502/1712) 2. Neoprene Rubber 3. Zinc Oxide 4. Carbon Black 5. Antioxident/ Accelerator/ Retarder/ Peptisizer 6. Misc. Chemicals : (Microcry-stallin wax Pigment and softners Sulphur- Stearic acid solvents, Plasticizers- Synthetic resins, bounding/ coupling agents activators & fillers, dip chemicals (excluding resorcinol) mould release agents tackiffiers and catalysts and syloff.	0.655 kg of Rubber compound in the export product 0.025 kg 0.212 kg 0.170 kg 0.010 kg 0.042 kg
Note: For import of item at Sl. No. (1) above the applicant shall furnish bifurcated quantities of Natural Rubber and Synthetic Rubber (SBR-1502/1712) in a ratio which does not exceed 0.655 kg rubber Compound for the export of 1 kg of resultant product. The exporter shall also get the consumption of similar ratio certified in the Shipping Bill of Export.
A2479	Toluene Di Isocyanate(TDI)	1 kg	1. Toluene 2. Palladium Chloride Catalyst	0.668 kg 5.54 grams
A2480	Meta Nitro Benzoyl Chloride	1 kg	1. Meta Nitro Benzoic Acid	1 kg
A2481	Para Nitro Benzoyl Chloride	1 kg	1. Para Nitro Benzoic Acid	0.948 kg
A2482	Zinc Dust	1 kg	1. Zinc	1.02 kg

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
C1549	Pressure Cooker made of Aluminium Body & Stainless Steel (AISI 304 Grade) Lid	1 kg	1. Aluminium Circles, commercial grade 2. Non magnetic Stainless Steel Sheets/ Coils AISI 304 grade 1/1.25 MM thick	1.07 kg/kg content in the export product 1.25 kg/kg content in the export product
C1550	Carbon Steel (MS) Fabricated Tower Packings	1 MT	1. CRCA Carbon Steel (MS) Sheets/ Strips	1.02 MT per MT of export product.
C1551	Floppy Diskettes Loaded with software (including information/data)	1 No.	1. Blank Floppy of Diskettes of relevant specification (including size)	1 No.
C1552	Battery type HBL-SZ45 22.5V. 45 AH (Silver Oxide zinc air craft Batteries)	1 No.	1. Silver Ingots/ sheets OR Used life expired silver oxide zinc aircraft batteries 15 STS S 45 B or ABL/HBL SZ 45 2. Zinc Oxide 3. Nylon Moulding granules/ powder 4. Cellophane (C-19/350 P00) Regenerated Cellulose film 5. Grade-169-02 paper rolls/ filter reels 6. Metregrip 303 LV epoxy Adhesive acticator 7. Metregrip 303 LV epoxy Adhesive base	4.7527 kgs. 1.41 Nos. 3.81 kgs. 4.000 kgs. 1.05 kgs. 8.200SQM 0.040 Ltrs. 0.40 Ltrs.
C1553	Battery type NCSP B 25150 (Nickel Cadmium Batteries) 24 Volts. 25AH	1 No.	1. Nickel fibremat fibrex OR Nickel Powder 2. Nylon Moulding granules type Zytel 151 NC 010 3. Nonwoven Separator (Viledon)FS 2115 4. Nickel Powder type 255/287/210 5. Celegard 3400 film 6. Battery Connectors 7. Metregrip 303 LV epoxy Adhesive acticator 8. Metregrip 303 LV epoxy Adhesive base	27.05 Sq.ft. 3.12 kgs. 3.70 kgs. 12.40 Sq/ Mtrs. 2.64 kgs. 6.20 Sq.Mtr. 1 No. 0.52 Ltrs. 0.52 Ltrs.
C1554	Shock Absorbers for two wheelers/three wheelers	1 No.	1. Bump Stop (Hexagon RSI)	1 No.
Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause.
C1555	Strut with Spring Assembly for Van	1 No.	1. Reverse DU Bush 2. Rod Seal 20 MM 3. Bushing 20 MM	1 No. 1 No. 1 No.
Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause.
C1556	Shock Absorbers (Gas filled) for Multi Utility vehicle (MUV)	1 No.	1. Piston Rod Seal	1 No.
Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause.
C1557	Shock Absorbers for Cars/Jeep-conventional	1 No.	1. M. L. Seal	1 No.
Note: The import of components shall be permitted on net to net basis without any wastage with accountability clause.
C1558	Circuit Breakers Upto & including 200KVA	1 No.	1. Copper wire Rods/ cathodes 2. Copper Strips 3. Plain Copper stranded Flex round (Braided Copper) 4. Aluminium Sheets/ Ingots 5. CRCA Sheets 6. Thermostat Metals 7. Electrical Contact Buttons/ Square Buttons/ Round Buttons 8. Fasteners/Tab Nuts 9. Extension Springs 10. Secondary Latch Spring 11. Contact Arm Springs	1.01 kg/kg content in the export product 1 kg/kg content in the export product 1 kg/kg content in the export product 1.01 kg/kg content in the export product 1.01 kg/kg content in the export product Net to net Net to net Net to net Net to net Net to net Net to net
Note: The import of components shall be permitted on net to net basis with accountability clause and the type, technical specifications (including part No., if any), etc., of the components sought for import should conform to those utilised in the manufacture of the resultant product, which should be reflected in the export documents (shipping bills) also.
C1559	12 Fiber Optical Fibre Armoured Cable Cable outer Dia: 13.8 MM +/- 1 MM 171 kg/km +/-5% Consisting of two PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	12.60 km 8.30 kg 0.17 kg 0.13 kg 5.74 kg 33.60SQ.MTR 90.74 kg 56.62 kg 2.91 kg 2.69 kg 1.05 KM 1.08 kg 1.05 KM
C1560	24 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14 MM +/- 1 MM 173 kg/km +/-5% Consisting of two PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	25.20 km 8.30 kg 0.17 kg 0.25 kg 5.74 kg 36.75SQ.MTR 91.94 kg 56.62 kg 2.91 kg 2.69 kg. 1.05 KM 1.08 kg 1.05 KM
C1561	48 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14 MM +/- 1 MM 177 kg/km +/-5% Consisting of four PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	50.40 km 16.59 kg 0.33 kg 0.50 kg 11.48 kg 36.75SQ.MTR 79.52 kg 56.62 kg 2.91 kg 2.69 kg. 1.05 KM 1.08 kg 1.05 KM
C1562	72 Fiber Optical Fibre Armoured Cable Cable outer Dia: 14.8 MM +/- 1 MM 212 kg/km +/-5% Consisting of six PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	75.60 km 24.89 kg 0.50 kg 0.75 kg 17.22 kg 39.90SQ.MTR 82.54 kg 64.71 kg 2.91 kg 4.03 kg. 1.05 KM 1.08 kg 1.05 KM
C1563	96 Fiber Optical Fibre Armoured Cable Cable outer Dia: 16.3 MM +/- 1 MM 258 kg/km +/-5% Consisting of eight PBT Tubes of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	100.8 km 33.10 kg 0.66 kg 1.01 kg 22.96 kg 44.10SQ.MTR 102.15 kg 74.42 kg 2.91 kg 6.05 kg. 1.05 KM 1.08 kg 1.05 KM
C1564	144 Fiber Optical Fibre Armoured Cable Cable outer Dia: 19.2 MM +/- 1 MM 348 kg/km +/-5% Consisting of 12 PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	151.2 km 49.78 kg 1.00 kg 1.52 kg 34.44 kg 60.90 SQ.MTR 141.71 kg 93.83 kg 2.91 kg 7.39 kg. 1.05 KM 1.08 kg 1.05 KM
C1565	216 Fiber Optical Fibre Armoured Cable Cable outer Dia: 20.2 MM +/- 1 MM 411 kg/km +/-5% Consisting of nine PBT Tube of 4 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	226.8 km 68.06 kg 1.36 kg 2.28 kg 58.11 kg 69.30SQ.MTR 132.79 kg 119.71 kg 2.91 kg 7.39 kg. 1.05 KM 1.08 kg 1.05 KM
C1566	288 Fiber Optical Fibre Armoured Cable Cable outer Dia: 24.6 MM +/- 1 MM 577 kg/km +/-5% Consisting of 12 PBT Tube of 4 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 9. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 10. Water Swellable Yarn 11. F.R.P. Rod (2MM) 12. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 13. Hot Foil Marking Tape White/Black	302.4 km 90.74 kg 1.81 kg 3.04 kg 77.48 kg 84 SQ.MTR 234.33 kg 135.89 kg 2.91 kg 14.78 kg. 1.05 KM 1.08 kg 1.05 KM
C1567	18 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 95 kg/km +/-5% Consisting of 3 PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8.Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black	18.90 km 12.44 kg 0.25 kg 0.19 kg 8.61 kg 33.60 SQ.MTR 61.05 kg 3.63 kg 2.02 kg. 1.05 KM 0.72 kg 1.05 KM
C1568	36 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 97 kg/km +/-5% Consisting of 3 PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black	37.8 km 12.44 kg 0.25 kg0.38 kg 8.61 kg 33.60SQ.MTR 61.05 kg 3.63 kg 2.02 kg. 1.05 KM 0.72 kg 1.05 KM
C1569	48 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 11.2 MM +/- 1 MM 103 kg/km +/-5% Consisting of 4 PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black	50.4 km 16.59 kg 0.33 kg 0.50 kg 11.48 kg 36.75SQ.MTR 54.85 kg 1.05 kg 1.05 kg. 1.05 KM 0.72 kg 1.05 KM
C1570	72 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 12.2 MM +/- 1 MM 127 kg/km +/-5% Consisting of 6 PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black	75.6 km 24.89 kg 0.50 kg 0.75 kg 17.22 kg 39.90SQ.MTR 57.66 kg 2.91 kg 1.05 kg. 1.05 KM 0.72 kg 1.05 KM
C1571	120 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 16.6 MM +/- 1 MM 206 kg/km +/-5% Consisting of 10 PBT Tube of 2.8 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black	126.00 km 41.48 kg 0.83 kg 1.05 kg 28.70 kg 50.40 SQ.MTR 106.57 kg 1.45 kg 6.05 kg. 1.05 KM 0.72 kg 1.05 KM
C1572	216 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 19 MM +/- 1 MM 301 kg/km +/-5% Consisting of 9 PBT Tube of 4 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black	226.8 km 68.06 kg 1.05 kg 2.28 kg 58.11 kg 60.90 SQ.MTR 134.68 kg 1.05 kg 12.77 kg. 1.05 KM 0.72 kg 1.05 KM
C1573	288 Fiber Optical Fibre unarmoured Cable Cable outer Dia: 22.8 MM +/- 1 MM 412 kg/km +/-5% Consisting of 12 PBT Tube of 4 mm OD	1000 MTR=1 KM	1. Single Mode Optical Fibre 250 micron (Natural Colour) 2. Polybutylene Terpthalate (PBT) 3. PBT Master Batch 4. Colouring INK U.V. 5. Thixotropic Jelly compound (filling/ flooding) 6. Water Blocking Tape 0.25 mm thickness 7. High Density Polyethylene (H.D.P.E.) 8. M.S. Tape Copolymer & Chrome Plated 8. Aramid Yarn/ Aramid filament yarn (DTEX 3160/3200) 9. Water Swellable Yarn 10. F.R.P. Rod (2MM) 11. Water Blocking Rib cord/ Aramid Rib Cord (DTEX 1610/1680) Single/3 Play 12. Hot Foil Marking Tape White/Black	302.4 km 90.74 kg 1.81 kg 3.04 kg 77.48 kg 69.00SQ.MTR 201.87 kg 1.45 kg 12.77 kg. 1.05 KM 0.72 kg 1.05 KM
C1574	Bicycle Tube valve made of Brass	1 kg	1. Brass Scrap	1.20 kg per kg. of export product

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
E81	Psyllium Husk/ powder/ Isabgol Husk/ powder	1 MT	1. Methyl Bromide 2. Ethylene Oxide 3. HDP/LDP/PP 4. Card Board/ Kraft Paper other than ivory board and white board	250 gms 50 gms 1.05 kg/kg weight of relevant packing 1.1 kg/kg weight of relevant packing

Annexure "E"
PLASTIC PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty. Allowed
H422	Nylon-6 Dipped Tyre Cord Fabric	1 MT	1. Nylon-6 Yarn 2. VP Latex	1.02 MT/MT 40 kg/MT
H423	PVDC coated PVC film (containing 0.900 kg PVC film and 0.100 kg PVDC coating)	1 kg	1. PVC Film OR 1. a) PVC Resin b) Epoxidised Soyabean Oil c) PVC Stabilizer d) Pigment e) PVC processing aid f) PVC Impact modifier g) Lubricant 2. Coating materials 2. a) PVDC aqueous dispersion (Total solids 55+/-2%) b) Aqueous dispersion of vinylidene chloride) (Total Solid content 60+/-1%) a) Aqueous dispersion Vinylidenns chloride-Methacrylate Copolymer (TotalSolid Content 55+/-1%) OR 2. a) Primer-PVDC dispersions in ethyl acetate (Total solid content 50 +/-2%) b) Hardner-PVDC dispersions in ethyl acetate (Total solid content 75 +/-2%) c) Aqueous dispersion Vinylidene chloride-Methacrylate Copolymer (Total Solid Content 55+/-1%) d) Ethyl acetate solvent	0.0224 kg 0.1158 kg 0.0217 kg 0.0400 kg 0.990 kg 0.8217 kg 0.0545 kg 0.0297 kg 0.0049 kg 0.0158 kg 0.1010 kg 0.0119 kg 0.0204 kg 0.1447 kg 0.0217 kg

Note: 1. In case of variation in the weight of PVC film, the qty of items of import at S. No. 1 or 1 (a to g) shall be worked out adopting the following: A x B/C Where A = Quantity allowed for 0.900 kg of PVC film. B = Weight of PVC film in one kg of export product. C = 0.900 Note: 2. Increase of variation in the weight of PVDC coating in the export product, the quantity of inputs at S. No. 2 (a to c) and 2 (a to d) shall be worked out by adopting the following: D X E /F Where D = quantity allowed for 0.100 kg PVC coating E = Weight of PVDC coating in the export product F = 0.100 Note: 3. In case of variation in the solid content of solid content at S. No. 2 quantity shall be worked out on pro-rata basis.

Annexure “F”
TEXTILE PRODUCTS

Sl.No.	Export Item	Qty.	Import Item	Qty Allowed
J332	Ladies wrap skirt	1 No.	1. Fabrics to be used in the garment	1.5 sq. mtr.
J333	Ladies Chemise	1 No.	1. Fabrics to be used in the garment	1.50 sq. mtr.

Presented by eximkey.com