PUBLIC NOTICE No.9 (RE-2000)/1997-2002 Dated 1-5-2000. Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol. 1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments / modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments / corrections at appropriate places as mentioned in Annexure 'W' to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions siiall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS After the existing entry at SI.No.A-2403, the new entries from SI.No.A-2404 to A-2428 shall be added as per Annexure "B" to this Public Notice.
ENGINEERING PRODUCTS After the existing entry at SI.No.C-1521, the new entries from SI.No.C-1522 to C-1530 shall be added as per Annexure "C" to this Public Notice.
LEATHER PRODUCTS After the existing entry at SI.No.G-46, a new entry SI.No.G-47 shall be added as per Annexure "C" to this Public Notice.
TEXTILE PRODUCTS After the existing entry at SI.NoJ-311, a new entry SI.NoJ-312 shall be added as per Annexure "C" to this Public Notice.
5. In the Hand Book of Procedures (Vol-2) 1997-2002, as amended, Input Output Norms are valid, in some cases, upto a specified period. In all such cases, validity of Input Output Norms shall stand extended upto 30th September, 2000.
This issues in Public interest.
Sd/-
(N.L. Lakhanpal)
Director General of Foreign Trade
Annexure "A" AMENDMENTS/CORRECTIONS-------------------------------------------------------------------------------------- SI Page Reference Amendments/CorrectionsNo. No.--------------------------------------------------------------------------------------1 2 3 4--------------------------------------------------------------------------------------1. 14 Chemicals & After import item No.3(c) the following item along Allied Products with quantity shall be added:- Sl.No.A58 "(d) Potassium Carbonate - 0.267 kg" 2. 17 Chemicals & After import item No.3(b) the following item along Allied Products with quantity shall be added:- Sl.No.A69 "(c) Potassium Carbonate - 0.174 kg" 3. 19 Chemicals & The norms covered by this entry shall be Allied Products substituted by the following:- Sl.No.A84 ------------------------------------------------------------------------ Sl.No. Export Item Qty. Import Item Qty. Allowed ------------------------------------------------------------------------ A84 Betamethasone 1 kg 1. 17-Alpha 1 -Di-Hydroxy- 1.125 kg Dipropionate 16-Beta Methyl-9-Beta, BP 93MSP 23 11-Beta-Epoxy Prigina-1, 4-Diene-3, 20-Diene (DB-XI) 2. Triethyl Ortho Propionate/Trimethyl Ortho Propionate 0.65 kg 4. 35 Chemicals & The description of import item No. 1 along with quantity Allied shall be amended to read as under:- Products Sl.No.A177 1.6 APA - 0.49 kg OR i) Pencillin G Potassium - 1.568 BOU ii) Methylene Chloride - 0.49 kg iii) Pen. G Amidase - 0.822 gm". 5. 44 Chemicals & The norms covered by this entry shall be substituted by Allied the following:- Products Sl.No.A238 ------------------------------------------------------------------------------------ Sl.No. Export Item Qty. Import Item Qty. Allowed ------------------------------------------------------------------------------------ A238 Flucloxacillin 1 kg 1. Amino Penicillanic 0.502 kg Sodium Acid (6 APA) OR 1.a) Penicillin G 1.606 BOU Potassium First Crystal b) Penicillin G Amidase 0.842 gm Enzyme c) Methylene 0.502 gm, Chloride / Butyl Acetate 2. FCM1C Chloride 0.706 gm OR 2.a) 2-Fluoro-6-Chloro 0.806 kg Benzaidehyde b) Hydroxylamine 0.537 kg Sulphate c) Methyl Aceto Acetate 0.77 kg d) Chloroform 0.95 kg e) Sodium Hydroxide 0.76 kg 3. 2-Ehtyl Hexanoic Acid 0.37 kg 4. Methylene Chloride 2.30 kgs 5. Acetone 0.50 kg 6. Chloroform 0.90 kg--------------------------------------------------------------------------------------------- 6. 73 Chemicals & The norms covered by this entry shall be substituted by Allied the following:- Products Sl.No.A487------------------------------------------------------------------------ Sl.No. Export Item Qty. Import Item Qty. Allowed------------------------------------------------------------------------ A487 Acid Black 172 1 kg 1. Beta Naphthol 0.746 kg (100% Dye 2. Sodium Nitrite 0.251 kg content) 3. Twitchell Oil 0.020 kg------------------------------------------------------------------------ 7. 146 Chemicals & The norms covered by this entry shall be substituted by Allied the following:- Products Sl.No.A1045-------------------------------------------------------------------------------------------Sl.No. Export Item Qty. Import Item Qty. Allowed-------------------------------------------------------------------------------------------A1045 Laboratory 1 kg 1.Relevant Fused Silica/ 1.70 kg Equipment/ Quartz Borosilicate Tube Glassware of assorted size and made of Fused thickness Silica/Quartz/ Borosilicate-------------------------------------------------------------------------------------------- 8. 164 Chemicals & The norms covered by this entry shall be substituted by Allied the following:- Products Sl.No.A1280-------------------------------------------------------------------------------------------- Sl.No. Export Item Qty. Import Item Qty. Allowed-------------------------------------------------------------------------------------------- A1280 Cocoamidopro 1 kg 1. Coconut fatty Acid 0.187 kg pyl Betaine (36 OR +/- 2% Solids) Methyl ester of 0.190 kg (Active matter coconut Fatty Acid 29% 2. Dimethyl Amino Acid 0.087 kg minimum) 3. Sodium Mohochloro 0.093 kg Acetate OR Monochloro Acetic 0.077 kg Acid 4. Caustic Soda Flakes 0.033 kg-------------------------------------------------------------------------------------------- 9. 210 Chemicals & 1. The description of the export product shall be Allied amended to read as under: - Products "Chlorobutyl or Bromobutyl / Natural Rubber Blended Sl.No.A1676 Tubes". 2. The description of import item No. 1 shall be amended to read as under: - "Relevant Chlorobutyl Rubber or Bromobutyl Rubber' 10. 214 Chemicals & The norms covered by this entry shall be substituted by Allied the following:- Products Sl.No.A1687-------------------------------------------------------------------------------------------Sl.No. Export Item Qty. Import Item Qty. Allowed-------------------------------------------------------------------------------------------A1687 Metal 1 kg 1. Mild Steel 1.30 kg/kg fitted / Sheets / coils / Plates content in Bonded / / Rods / Rounds / Strips the export Un-bonded product rubber Part 2. Relevant Rubber (Moulded / Compound consisting of Extruded) the following:- including Engine 2. (a) Relevant Natural 0.63 kg/kg Mounting Rubber / Synthetic content of and Rubber depending Rubber Automotive upon the compound Parts description of the in the product to be export exported product (b) Carbon Black 0.126 kg/kg content of Rubber compound in the export product (c) Zinc Oxide 0.0315 kg/kg content of Rubber compound in the export product (d) Rubber Chemicals 0.012 kg viz. Antioxidant / /kg Accellerator / content of retarder and Rubber Peptizer compound in the export product (e) Misc. chemicals viz. 0.042 kg Stearic Acid, /kg Insoluble Sulphur, content of Silicon Oil Rubber compound in the export product 3. Bonding agent 0.01 kg /kg of steel in the export product------------------------------------------------------------------------------------------- Note: 1 The CIF Value of rubber Chemicals and Miscellaneous Chemicals should not exceed 7% of FOB value of exports. Note: 2 The bonding agents shall not be allowed for import in the case of metal unbonded part or fitted part. 11. 302 Chemicals & The description of import item No.6 along with quantity Allied shall be amended to read as under:- Products Sl.No.A2263 "2-Methoxy Propene -0.905 kg OR 2,2-Dimethoxy Propane -1.45 kg"12. 307 Chemicals & The quantity of import item Nos. 8.9 & 10 shall be amended Allied to read as under Products "8. Glass Vials - 11,500 Nos Sl.No.A2302 9. Rubber Stopper - 11,000 Nos 10. Aluminium Caps / Seals - 11,000 Nos"13. 308 Chemicals & The quantity of import item Nos. 8,9 & 10 shall be amended Allied to read as under Products "8. Glass Vials - 5,750 Nos. Sl.No.A2304 9. Rubber. Stopper - 5,500 Nos 10. Aluminium Caps / Seals - 5,500 Nos"14. 443 Engineering The norms covered by this entry shall be substituted by Product the following Sl.NoC187------------------------------------------------------------------------ Sl.No. Export Item Qty. Import Item Qty. Allowed------------------------------------------------------------------------C187 A. Electric 1000 1. Aluminium Strip 2.916 kg Lamp Caps pcs. OR (Aluminium)/GLS Aluminium Ingot 2.974 kg Caps B22D OR & E 27/27 Aluminium Scrap 3.047 kg 2. Brass Strip 0.224 kg OR Brass Cathode / Rod 0.233 kg B. FTL Caps 1000 1. Aluminium Strip 2.55 kg (G-13/35 pcs. OR mm) Aluminium Ingot 2.601 kgs 2. Brass Pin 2020 Nos. C. FTL Caps 1000 1. Aluminium Strip 1.65 kg (G-13/24 pcs. OR mm or 24.5 Aluminium Ingot 1.683 kg mm) OR Aluminium Scrap 1.724 kg 2. Brass Pin 2020 Nos.------------------------------------------------------------------------ 15. 531 Engineering In the note below this norm, the words viz. "Table 2" Product shall be substituted by "Table 3". Sl.No.C47216. 657 Engineering The description of export product alongwith quantity shall Product be corrected to read as under:- Sl.No.C1058 "Lead Acid Storage Batteries of all types / Battery Cells" - 1 No."17. 720 Engineering The norms covered by this entry shall be substituted by Product the following:- Sl.No.C1343----------------------------------------------------------------------------------------------- Sl.No. Export Item Qty. Import Item Qty. Allowed-----------------------------------------------------------------------------------------------C1343 Typewriter 1000 1. High carbon Steel Strip 574 kg (Manual) with Nos. (0.97 x 55 mm) ABS Casing 2. ABS Granules 1250 kg Top cover and 3. Aluminium Allos Ingots 4700 kg Keyboard frame 4. Steel wires (Tempered 138 kg and hardened/ profiles 5. Steel Rollers 8000 Nos 6. Steel Type sets 45000 Nos----------------------------------------------------------------------------------------------- 18. 738 Engineering The description of import item No. 1 shall he amended to Product read as under:- Sl.No.C1400 1. Aluminium Tube of relevant size in terms of LD/O.D." 768 Engineering The engineering Table-2 appearing at the end of Group-C Table-2 (engineering Products) shall be deleted.19. 869 Plastic The description of the export product shall be amended to Product read as under Sl.No.H66 "Disposable Plastic Cups, Glasses, Plates, Trays, Bowls, Containers & Lids made of Polystyrene-.20. 960 Textile The description of the export product shall be amended to Product read as under Sl.NoJ21 "Polyester / Cotton Blended Grey / Bleached Fabrics."21. 974 Textile After import item No. 1, the following item along with Product quantity shall be added Sl.NoJ68 2. Raw cotton - 1.22 kg/kg content in the export product. 22. 981 Textile In import item no. 1, the following alternative item shall & Product be added 982 Sl.NoJ92 "OR Raw cotton for carded counts 1.225 kg/kg content in of yarn of 40s & below the export product OR Raw cotton for combed 1.289 kg/kg content in counts of yarn of 40s and below the export product OR Raw cotton for combed 1.325 kg/kg content in counts of yarn of above 40s" the export product 23. 982 Textile In import item No.2, the following alternative item shall Product be added Sl.NoJ93 "OR Raw cotton for carded counts 1.175 kg/kg content in of yarn of 40s & below the export product OR Raw cotton for combed 1.270 kg/kg content in counts of yarn of 40s and below the export product OR Raw cotton for combed 1.290 kg/kg content in counts of yam of above 40s" the export product24. 982 Textile In import item No. 1, the following alternative item shall Product be added Sl.NoJ94 "OR Raw cotton for carded counts 1.225 kg/kg content in of yarn of 40s & below the export product OR Raw cotton for combed 1.289 kg/kg content in counts of yarn of 40s & below the export product OR Raw cotton for combed 1.325 kg/kg content in counts of yarn of above 40s" the export product25. 982 Textile After import product No.2, the following item along with Product quantity shall be added:- Sl.No.J95 "3.Raw cotton for carded counts 1.225 kg/kg content in of yarn of 40s & below the export product OR Raw cotton for combed 1.289 kg/kg content in counts of yam of 40s and below the export product OR Raw cotton for combed 1.325 kg/kg content in counts of yarn of above 40s". the export product 26. 983 Textile The description of the export product shall be amended to Product read as under Sl.No.J100 "Combed Cotton / Melange Yarn of counts 40s and below"27. 983 Textile The description of the export product shall be amended to Product read as under Sl.NoJ101 "Combed Cotton / Melange Yarn of counts above 40s".28. 983& Textile In import item No. 1, the following alternative item along 984 Product with quantity shall be added:- Sl.NoJ103 "OR Raw cotton for carded counts 1.225 kg/kg content in export of yarn of 40s & below the product OR Raw cotton for combed counts 1.289 kg/kg content in of yarn of 40s and below the export product OR Raw cotton for combed counts 1.325 kg/kg content in of yarn of above 40s". the export product . 29. 984 Textile In import item No.2, the following alternative item with Product quantity shall be added Sl.NoJ105 "OR Raw cotton for carded counts 1.225 kg/kg content in of yarn of 40s & below the export product OR Raw cotton for combed counts 1.289 kg/kg content in of yarn of 40s and below the export product OR Raw cotton for combed counts 1.325 kg/kg content in of yarn of above 40s". the export product 30. 1000 Textile In import item No. 1, the following alternative item along Product with quantity shall be added:- Sl.NoJ225 "OR Wool Yarn 1.10 kg content in the export product31. 1005 Textile The norms covered by this entry shall be substituted by Product the following Sl.No.J243---------------------------------------------------------------------------------------------- Sl.No. Export Item Qty. Import Item Qty. Allowed---------------------------------------------------------------------------------------------- J243 Shawls / Scraves / 1 kg 1. Scoured Wool 1.308 kg content Mufflers & in the export Made-ups made product of 100% wool OR 1.198 kg content Wool Top in the export product OR Wool Yarn 1.10 kg content in the export product 32. 1012 Textile The quantity of the import item No. 1 shall be amended to Product read as under: - Sl.No.J3OO "0.90 Meters"33. 1042 Miscellaneous The quantity of the import item No.4 shall be corrected to Product read as under Sl.NoK122 "1.66 Sq. Mtrs" 34. 1043 Miscellaneous The quantity of the import item No.4 shall be corrected to Product read as under Sl.NoK123 174 Sq. Mtrs" 35. 1043 Miscellaneous The quantity of the import item No.4 shall be corrected to Product read as under Sl.NoK124 183 Sq. Mtrs" ANNEXURE "B" CHEMICALS & ALLIED PRODUCTS Sl.No. Export Item Qty Import Item Qty. allowedA2404 Antimony Trisulphide 1 Kg. 1. Antimony Trioxide O.900 Kg. 99.8% purity 2. Sodium Sulphide 0.300 Kg.A2405 Cloxacillin Benzathine 1 Kg. 1. Potassium Penicillin G First Crystal 1.645 BOU 2. Penicillin G Amidase 0.863 gm. 3. 3-(2-Chlorophenyl)-5- Methyl Isoxazole-4- 0.628 Kg. Carbonyl Chloride) (CM1C Chloride) OR i) Ortho Chloro Benzaldehyde ii) Hydroxyl Amine Sulphate 0.666 Kg. iii)Methyl Aceto Acetate 1.332 Kg. iv) Chloroform 0.950 Kg. 4. Activated Carbon 100 gm. 5. Methylene Chloride 2.28 kg. 6. Acetone 0.476 kg. 7. Chloroform 0.952 kg. 8. Isopropyl Alcohol 0.50 kg.A2406 Ketoconazole USP 23 1 kg. 1. 2,4 Dichloro Acetophenone 1.365 Kg. 2. Imidazole 1.584 kg. 3. 1-Acetyl-4-(4- Hydroxy Phenyl) Piperazone 0.776 kg. 4. Toluene 9.12 kg. 5. Methanol 14.35 kg. 6. Dimelthyl formamide 0.90 kg. 7. Acetone 3.60 kg. 8. Dimethyl Sulfoxoide 1.566 kg.A2407 2-(Hydroxy Methyl) 3,5, 1 kg. 1. 2,3,5, Tri Methyl Pyridine 1.990 kg. Dimethyl-4-Methoxy 2. N-Butanol 4.000 Kg. Pyridine (Omeprazole 3. Methylene Chloride 10.000 Kg. Intermediate) 4. Activated Carbon 0.200 Kg. 5. Phosphotungstic Acid (CAT-44) 0.100 Kg. A2408 4-Amino-2- (4-(1,4- 1 kg. 1. (a)6,7 Dimethoxy Quinazoline- Benzodioxan-2- Carbonyl)- 2,4 Dione 2.05 Kg. Piperazine- 1 -YL-6, 7 (b)Dimethyl Acetamide 0.54 Kg. Dimethoxy auinozoline (c)Tetrahydrofuran 2.83 Kg. monomethane Sulfanate OR (Doxazosin Messyleate) 4-Amino 2-Chloro 6,7- Dimetboxy 1.11 Kg. Quinazoline 2. N-(1,4-Benzodioxan 2-YL Carbonyl) - 1.29 Kg. Piperazine 3. Methane Sulfonic Acid 0.29 Kg. 4. Dimethyl formamide 1.80 Kg. 5. Methanol 4.90 Kg.A2409 Loratadine 1 Kg. 1. 3-Chloro Benzyl Cyanide 8.62 Kg. OR 3-Chloro Benzyl Dehyde 8.00 kg OR 3-Chloro Benzyl Chloride 9.21 kg 2. Methyl / Ethyl Nicotinide 8.63 kg. 3. 4-Chloro-N-Methyl Piperidine 1.84 kg. 4. N,N dimethyl Carbonyl chloride 5.00 kg. 5. Tetrahydrofuran 22.00 kg 6. Methylene Chloride 22.00 kg 7. Acetonitrile/Dimethyl Sulfoxide, 16.50 kg. 8. Di-Isopropylamine / Triethyl Amine 0.50 ]kg. A2410 Carbamazepine 1 kg. 1. Iminodibenzyl 1.55 kg OR 1. (a) Othro Nitro Toluene 4.29 kg (b) Sodium Metboxide (c) Cyclo Hexane 1.19 kg (d) Isopropyl Alcohol 2.51 kg (e) Toluene 0.52 kg (f) Methanol 1.53 kg 2. Potassium Hydroxide 2.15 kg 3. Bromine 0.93 kg 4. Orthodichloro Benzene 0.39 kg 5. Toluene 1.21 kg 6. Acetone / DMF / Ethylene Dichloride 2.00 kgA2411 Ceramic Colour Yellow l kg 1. Antimony Trioxide 0.297 kg orange(containing Antimony Trioxide 28.80%)A2412 Aceto Acet-Ortho- l kg 1. Acetic Acid 0.855 kg Anisidine 2. Ortho Anisidine 0.745 kgA2413 Plastic Files / Folders / 1 No. 1. Relevant PVC / Polypropylene Laver Arch Files Sheet 1.05 kg/kg content in the export product 2. Relevant Book Binding Board 1.05 kg/kg content in the export product 3. Relevant components as Contain the export product a) Paper Filling Machanism Net to net b) Metal Rado Slots Net to net c) Metal Fingerings Net to net d) Metal Riverts Net to netA2414 PVC Folder/ 1 No. 1. Relevant PVC / Polypropylene Polypropylenc Files / ZIP Sheet 1.05 kg/kg Lock Bag content in the export product 2. Relevant Book Binding Board 1.05 kg/kg content in the export product 3. Relevant components as Contain the export product a) Paper Filling Machanism Net to net b) Metal Rado Slots Net to net c) Metal Fingerings Net to net d) Metal Riverts Net to netA2415 Brief Card 1 MT 1. Wood Pulp 0.9525 kg 2. Calcium Carbonate Clay 0.019 kg 3. Latex 0.0076 kg 4. CMC(Carboxy Methyl Cellulose) 0.004 kg 5. Wetend Chemicals 0.0600 kg 6. Laminating Chemicals 0.049 kg 7. Stretch Film 0.0013 kg 8. Poly Kraft Paper 0.015 kgA2416 Diphenyl Isodecyl l kg 1. Phenol 0.558 kg Phosphite (DPOP) 2. Isodecyl Alcohol 0.419 kg A2417 C-80-Hydroxy 1 kg 1. 4-13 Xinino Propy 11 0.600 kg Naphthalene-2 Carbonyl - Morpholine (3 Morpholine - Propyl- 2. BON Methyl Ester 0.841 kg Amine)A2418 Irgaphor Green 1736 1.4 1 kg 1. 2.4 -Dimethyl-3- Pentanol 1.206 kg Tetrakis(2,4- Dimethylpenthy1-3-oxo) 2. Sodium Hvdride (60% 1,4-Tribromo 1,4- dispersion in paraffin) 0.415 kg (Formyl) Phthalocynate 3. Palladium chloride 0.238 kg Palladium (II) 4. N-MethA Formanilide 1.178 kgA2419 Irgaphor Green HW 627 1 kg 1. 2.4 -Dimethyl-3- Pentanon 1.022 kg (Tetra (2,4 Dimethyl-3- Pentyloxy) Palladium 2. Sodium Hydride (60% Phthalocyanine dispersion in paraffin) 0.352 kg 3. Palladium chloride 0.183 kgA2420 Novasol Yellow G liquid 1 kg 1. Vinyl Isobutyl Ether 0.517 kg (Solvent Yellow 124) 2. Aromatic Hydrocarbon (Dye content 55%) Solvent C lO-C 11 0.562 kg (shellsol AB Aromatic 150)A2421 Opaque white polyester 1 kg 1. DMT 0.819 kg chip 2. MEG 0.297 kg 3. Barium Sulphate 0.185 kg 4. DMIP 0.014 kg 5. Antifoam 0.00001 kg 6. Calcium Acetate 0.0007 kg 7. Manganese Acetate 0.000125kg 8. TPP 0.0014 kgA2422 Black -Centered Board 1 MT 1. Wood Pulp 0.992 kg 2. Calcium Carbonate Clay 0.122 kg 3. Latex (5% concentration) 0.0114 kg 4. Wet end chemicals Retention 0.0505 kg Aid, AKD Dimer of Fatty Acid AKD- Emulsifier Resin 216, AKD Stabiliser 472 Optical Brightening Agent Cutionic Starch Oxide Starch 5. Coating Chemicals (Carboxy 0.0173kg Methyl Cellulose, Lubricant, Insolubilizer, Optical brightening Agent, Dispersant, NaOH, coating starch) 6. Laminating Chemicals (Starch, 0.0196 kg Carboxy, Methyl Cellulose Insolubilizer) 7. Stretch Film As per packing policy 8. Polykraft paper As per packing policyA2423 Polytetrafluoroethyl ene 1 MT 1. Chloroform 4.3 MT Dispension (Emulsion 2. Perfluoro-octanic Acid Grade, TFE content (FC-26) 0.0075 MT 59.5+/- 0.5%)A2424 Silicon Polymer RS-103 1 kg Residual Polymer Mixture (Trimethyl Sliyl Vinyl (Average content 95%) 1.2 Methyl Polysiloxame)A2425 PVC Braided Hoses with 1 kg 1. PVC Resin 0.7 kg Synthetic Yarn 2. Dioctyl Ohthalate 0.250 kg (Nylon / Polyester) 3. PVC Stabilizer 0.030 kg 4. Relevant Synthetic Yam (Nylon/ Polyester) 0.070 kg NB: 1. The quantity of inputs at S.No. 1,2 & 3 are for PVC compound weight of 933 gms in the export product. For any variation in the PVC compound weight the items at S.No. 1,2 & 3 shall be allowed adopting the following formula: AXB/ 933 Where A = Quantity allowed for 933 gm PVC compound B = Weight of PVC compound in the export productNote: 2. The quantity of relevant Synthetic yarn at S.No.4 is for 67 gm of yarn in the export product. For any variation in the relevant yarn weight, the relevant yarn shall be allowed adopting the following fomula:- CXD/ 67 Where C = Quantity allowed for 67 gm yarn content in the export product. D = Weight of relevant Synthetic yarn in the export product. A2426 Glyphosate 41 % W/WSL 1 kg 1. Isopropyl Amine Salt of Glyphosate Tech.(62%) 0.668 kg 2. Surfactant (Inert Polyoxyethylene) 0.150 kgA2427 1-Ethyl-6Hydroxy 4- lkg 1. Ethyl Cyanoacetate 0.688 kg Methyl-2Pyridine 3- 2. Mono ethyl Amine 0.315 kg Carbonylamide 3. Methyl Aceto acetate 0.692 kgA2428 Nylon 6/66 Co-polymer 1 kg 1. Nylon 6/66 Copolymer Chips 1.05 kg/kg mono-filament yarn (soft 2. Antioxidant 0.002 kg grade) 3. Surface Active Agent 0.001 kg 4. Finish Oil 0.001 kg 5. Relevant PP/PS granules for bobbins 1.05 kg/kg content in the export productNote: For the export of Nylon 6/66 co-polymer mono-filament yarn (soft grade) upto 500 mtrs length in smaller disposable bobbins/coils, nylon 6/66 co-polymer chips shall be allowed at the rate of 1.08 kg/kg instead of 1.05 kg/kg in the export product. ANNEXURE "C" ENGINEERING PRODUCTS SR. No. Export Item Qty Import Item Qty. allowedC1522 Pneumatic Tool-Balancer 1 No. 1. Relevant Bearing Ball 1No. with balance Capacity 2. Relevant Gear Worm 1No. above 75 lb (34.1 kg) upto 3. Relevant Shaft-worm gear 1No. and including 210 lb 4. Relevant Retainer ball (thrust) 1No. (95.5 kg). 5. Relevant Race Retainer 1No. 6. Relevant Ball Race 1No. 7. Relevant Worm 1No. 8. Relevant Ball Bearing 1No. 9. Relevant Guide Plate 1No. 10. Relevant Stop Shield 1No. 11. Relevant Housing Cable drum 1No. 12. Relevant Stop Assembly 1No. 13. Relevant Hook Assembly Swivel 1 No. 14. Relevant Housing cover 1No. 15. Relevant Cover 1No. 16. Relevant Hub-main spring 2Nos. 17. Relevant Assembly Main Spring and retainer 2Nos. 18. Relevant Hook 1No. 19. Relevant Cable 1No. 20. Relevant Clamp cable 1No. 21. Relevant Separator plate 1No. 22. Relevant Housing cable drum 1No. 23. Relevant Main spring anchor 1No. Note: The import of components shall be allowed on net to net basis with accountability clause. C1523 Pneumatic Tool-Clay 1 No. l. Relevant Cylinder 1 No. Digger / Utility Hammer 2. Relevant Sleeve 1 No. (picks) Latch Retainer 3. Relevant Retainer Latch 1 No. with Chuck 7/8" hex x 3 4. Relevant Latch Bushing 1 No. 1/4" (22.2 mm x 82.6 mm) 5. Relevant Handle & Bush Without muffler. Assembly 1 No. 6. Relevant Lever Chit 1 No. 7. Relevant Lever Pin 1 No. 8. Relevant Throttle Valve 1 No. 9. Relevant Retainer Latch Pin 1 No. 10. Relevant Valve 1 No. 11. Relevant Piston 1 No. 12. Relevant Upper valve case Lid 1 No. 13. Relevant Lower Valve case Lid 1 No. 14. Relevant Valve Case 1 No. 15. Relevant Back Head Bolt 2 Nos. Note: The import of components shall be allowed on net to net basis with accountability clause. C1524 Pneumatic Tool-Clay 1 No. 1. Relevant Cylinder 1 No. Digger / Utility Hammer 2. Relevant Sleeve 1 No. (picks) Latch Retainer 3. Relevant Retainer Latch 1 No. with Chuck 7/8" hex x 3 4. Relevant Latch Bushing 1 No. 1/4"(22.2 mm x 82.6 mm) 5. Relevant Handle & Bush Assembly 1 No. with muffler. 6. Relevant Lever Chit 1 No. 7. Relevant Lever Pin 1 No. 8. Relevant Throttle Valve 1 No. 9. Relevant Retainer Latch Pin 1 No. 10.Relevant Valve 1 No. 11.Relevant Piston 1 No. 12.Relevant Upper valve case Lid 1 No. 13.Relevant Lower Valve case Lid 1 No. 14.Relevant Valve Case 1 No. 15.Relevant Back Head Bolt 2 Nos. 16.Relevant Hood-Muffler complete 1 No. Note: The import of components shall be allowed on net to net basis with accountability pause. C1525 Pneumatic Toot Balancer 1 No. 1. Relevant Main Spring Anchor 1 No. with balance Capacity 2. Relevant Bearing ball 1 No. upto 75 lb (34.1 kg). 3. Relevant Drum Cable Assembly 1 No. 4. Relevant Gear Worm 1 No. 5. Relevant Shaft-worm gear 1 No. 6. Relevant Retainer ball (Thrust) 1 No. 7. Relevant Race Retainer 1 No. 8. Relevant Ball race 1 No. 9. Relevant Worm 1 No. 10.Relevant Ball Bearing 1 No. 11.Relevant Guide Plate 1 No. 12.Relevant Stop Shield 1 No. 13.Relevant Housing -cable drum 1 No. 14.Relevant Stop Assembly 1 No. 15.Relevant Flook Assembly Swivel 1 No. 16.Relevant Cover 2 Nos. 17.Relevant Hub-Main spring 1 No. 18.Relevant Assembly main spring and retainer 1 No. 19.Relevant Hook 1 No. 20.Relevant Cable 1 No. 21.Relevant Clamp cable 1 No. 22.Relevant Latch 1 No. Note: The import of component shall be allowed on net to net basis with accountability clause.C1526 Pneumatic Tool- 1 No. 1. Relevant Air Handle Cap 1 No. Reversible Drill with the 2. Relevant Valve 1 No. speed of 350 R.P.M. and 3. Relevant Live air handle sleeve 1 No. above upto and including 4. Relevant Governor Plunger 1 No. 750 R.P.M. 5. Relevant Governor Stop pin 1 No. 6. Relevant Governor bushing 1 No. 7. Relevant Governor weight 2 Nos. 8. Relevant Governor body 1 No. 9. Relevant Governor pin 1 No. 10.Relevant Reverse Sleeve 1 No. 11.Relevant Ball Bearing 2 Nos. 12.Relevant Dead handle 1 No. 13.Relevant Universal Joint 1 No. 14.Relevant Round Plug 1 No. 15.Relevant End plate 1 No. 16.Relevant Ball Bearing 1 No. 17.Relevant Liner 1 No. 18.Relevant rotor 1 No. 19.Relevant Spindle collar 1 No. 20.Relevant End Plate 1 No. 21.Relevant Spindle gear 1 No. 22.Relevant Gear case 1 No. 23.Relevant Collar 1 No. 24.Relevant Gear Pinion 1 No. 25.Relevant Ball Bearing 2 Nos. 26.Relevant Sleeve 1 No. 27.Relevant Oil regulating plug 1 No. 28.Relevant Dowel 1 No. 29.Relevant Muffler cover 1 No. 30.Relevant Feed post 1 No. 31.Relevant Bearing 1 No. 32.Relevant Feed Sleeve handle 1 No. 33.Relevant Transfer plate 1 No. 34.Relevant Cylinder cap 1 No. 35.Relevant Spindle 1 No. 36.Relevant Feed Sleeve centre 1 No. 37.Relevant Feed Sleeve 1 No. 38.Relevant Socket shank 1 No. 39.Relevant Dowel 3 Nos. 40.Relevant cylinder & Bushing Assembly 1 No. 41.Relevant Live air handle stem & Bush 1 No.Note: The import of components shall be allowed on net to net basis with accountability clause.C1527 Pneumatic Tool- Non 1 No. 1. Relevant Cap 1 No. Reversible Drill with the 2. Relevant Valve 1 No. speed of 350 RPM and 3. Relevant Live Air handle sleeve 1 No. above upto and including 4. Relevant Adaptor Flange 1 No. 750 RPM 5. Relevant Governor Bushing 1 No. 6. Relevant Governor weight 2 Nos. 7. Relevant Governor body 1 No. 8. Relevant Governor pin 1 No. 9. Relevant cylinder 1 No. 10.Relevant Ball Bearing 2 Nos. 11.Relevant Dead Handle 1 No. 12.Relevant End Plate 1 No. 13.Relevant Ball Bearing 1 No. 14.Relevant throttle roller protector 1 No. 15.Relevant Cylinder liner 1 No. 16.Relevant Rotor 1 No. 17.Relevant Spindle collar 1 No. 18.Relevant end plate 1 No. 19.Relevant Spindle gear 1 No. 20.Relevant Gear case 1 No. 21.Relevant Collar 1 No. 22.Relevant Gear Pinion 1 No. 23.Relevant Ball Bearing 2 Nos. 24.Relevant Spindle 1 No. 25.Relevant Bearing 1 No. 26.Relevant Transfer Plate 1 No. 27.Relevant Cylinder cap 1 No. 28.Relevant Governor Stop Pin 1 No. 29.Relevant G Plunger 1 No. 30.Relevant Dowel 3 Nos. 31.Relevant Dowel 1 No. 32.Relevant Stem & Bushing Assembly 1 No.Note: The import of components shall be allowed on net to net basis with accountability clause.C1528 Pneumatic Tool- 1 No. 1. Relevant Centre 1 No. Reversible Drill with the 2. Relevant Bushing 1 No. speed above 100 RPM 3. Relevant end plate 1 No. upto and including 350 4. Relevant Feed Post 1 No. RPM. 5. Relevant Rotor 1 No. 6. Relevant Liner 1 No. 7. Relevant rotor housing assembly 1 No. 8. Relevant Plate 1 No. 9. Relevant Ball Bearing 1 No. 10.Relevant spindle gear 1 No. 11.Relevant Gear case assembly 1 No. 12.Relevant throttle valve 1 No. 13.Relevant end Plate 1 No. 14.Relevant Gear Stud 1 No. 15.Relevant Ball Bearing 1 No. 16.Relevant Valve cage 1 No. 17.Relevant Valve pin 1 No. 18.Relevant Bearing clamp nut 1 No. 19.Relevant Governor Lever 1 No. 20.Relevant Governor body 1 No. 21.Relevant Governor push pin 1 No. 22.Relevant Ball Bearing 1 No. 23.Relevant Nut 1 No. 24.Relevant Governor weight 2 Nos. 25.Relevant Muffler 1 No. 26.Relevant Transfer Plate 1 No. 27.Relevant Collar 1 No. 28.Relevant roller race 1 No. 29.Relevant roller bearing assembly 1 No. 30.Relevant Retainer washer 2 Nos. 31.Relevant packing nut 1 No. 32.Relevant extractor pin 1 No. 33.Relevant gear pinion 1 No. 34.Relevant internal gear 1 NO. 35.Relevant internal gear 1 No. 36.Relevant Ball Bearing 2 Nos. 37.Relevant Ball Bearing 3 Nos. 38.Relevant Dead handle 1 No. 39.Relevant live air handle stem assembly 1 No. 40.Relevant Sleeve 1 No. 41.Relevant set screw 1 No. 42.Relevant throttle valve 1 No. 43.Relevant throttle cap 1 No. 44.Relevant seat 1 No. 45.Relevant universal joint 1 No. 46.Relevant sleeve 1 No. 47.Relevant retainer sleeve 1 No. 48.Relevant protection sleeve 1 No. 49.Relevant throttle valve plate 1 No. 50.Relevant ball bearing 1 No. 51.Relevant cylinder cap 1 No. 52.Relevant Feed sleeve handle 1 No. 53.Relevant Screw 1 No. 54.Relevant Spindle 1 No. 55.Relevant Bearing spacer 1 No. 56.Relevant Dowel 2 Nos. Note: The import of component shall be allowed on net to net basis with accountability clause. C1529 Pneumatic Tool-Reversible 1 No. 1. Relevant Centre 1 No. Drill with the speed upto 2. Relevant Bushing 1 No. 100 R.P.M. 3. Relevant end plate 1 No. 4. Relevant Feed Post 1 No. 5. Relevant Rotor 1 No. 6. Relevant Liner 1 No. 7. Relevant Rotor housing assembly 1 No. 8. Relevant Dead Handle 1 No. 9. Relevant Plate 1 No. 10.Relevant Ball Bearing 1 No. 11.Relevant throttle valve 1 No. 12.Relevant end plate 1 No. 13.Relevant Gear stud 1 No. 14.Relevant ball bearing 1 No. 15.Relevant valve cage 1 No. 16.Relevant valve pin 1 No. 17.Relevant bearing clamp nut 1 No. 18.Relevant Governor lever 1 No. 19.Relevant Governor push pin 1 No. 20.Relevant Ball bearing 1 No. 21.Relevant Nut 1 No. 22.Relevant Muffler 1 No. 23.Relevant Protection sleeve 1 No. 24.Relevant throttle cap 1 No. 25.Relevant roller bearing assembly 1 No. 26.Relevant packing nut 1 No. 27.Relevant ball bearing 1 No. 28.Relevant ball bearing 1 No. 29.Relevant transfer plate 1 No. 30.Relevant cylinder cap 1 No. 31.Relevant Feed sleeve handle 1 No. 32.Relevant throttle valve 1 No. 33.Relevant Screw 1 No. 34.Relevant roller race 1 No. 35.Relevant retainer washer 2 Nos. 36.Relevant throttle valve plate 1 No. 37.Relevant seat 1 No. 38.Relevant Collar 1 No. 39.Relevant sleeve 1 No. 40.Relevant Retainer sleeve 1 No. 41.Relevant sleeve 1 No. 42.Relevant Universal Joint 1 No. 43.Relevant Extractor Pin 1 No. 44.Relevant Governor Body 1 No. 45.Relevant Spindle 1 No. 46.Relevant Bearing spacer 1 No. 47.Relevant Internal gear 1 No. 48.Relevant gear pinion 1 No. 49.Relevant internal gear 1 No. 50.Relevant spindle gear 51.Relevant Governor weight 4 Nos. 52.Relevant set screw 1 No. 53.Relevant Dowel 2 Nos. 54.Relevant Live air handle stem assembly 1 No. 55.Relevant gear case assembly 1 No. 56.Relevant ball bearing 2 Nos. Note: The import of components shall be allowed on net to net basis with accountability clause. C1530 Movements for Electrical 1 No 1. Plastic Moulding Powder: 50 gms Measuring Instruments type: a)ABS Moving iron, Moving Coil, b)Polycarbonate Dynamo Meter, Bimetallic c)Polyphenylene oxide Net+5% Reed Type, Namely Volt d)Polyacetal wastage Meter, Ammeter, Frequency e)Polycarbonate Meter WATT meter, f)Polyamide multimeters, Insulation g)Phenol Formaldehyde (Bakelite) testers, Maximum Demand Power and Moulded components Indicator, Power factor thereof meter. 2. Silicon Oils 1 gm 3. Industrial Jewels with screws 2 Nos. 4. Pivots 2 Nos. 5. Hair Springs Net to net 6. Super Enamelled Copper wire Net to net 7. Duralumin Rods Free Cutting Net + 2% Aluminium Rods, Capillary wastage Tubes: a)Copper Bars/strips b)Manganin wire/Rods c)Eureka Wire/Rods 8. Magnet Centre Core Net to net 9. Coil former 1 No. 10. Mumetals Permalloy strips & Net to net components thereof 11. Pointers / Pointer Arms Net to net 12. Tant Bands / Ligaments Net to net 13. Barllium Copper / Phospher / Bronze strips Net + 5% wastage (Qty restricted to 20 gms) 14. Aluminium Die Castings Net to net 15. Bimetallic Springs 2 Nos. 16. Springs steel strips Net to net 17. Transistors, Capacitors, Net to net IC's & other electronic Components not covered by Other input entries 18. Yoke 1 No. 19. Hybride Circuits 1 No. 20. Zener Diodes 2 Nos. 21. Yoke Holder 1 No. 22. Lower Boss/under Boss 1 No. Annexure "D" LEATHER PRODUCTS Sl.No. Export Item Qty. Import Item Qty AllowedG 47 Finished Leather 1000 1.Relevant lining 1.05 sq. mtr./sq. mtr content Sofa Cover Sq.ft. in the export product (Stitched) 2. Polyester wading 1.05 sq. mtr./sq. mtr content in the export product 3. Zippers Net + 1 % wastage 4. Velcro Net + 2% wastage 5. Runner (slider) Net + 1 %wastage 6. Relevant double Net + 1 %wastage fused tape Note: 1. The items thread and needle shall not be allowed. 2. The norms for the chemical items are to be allowed as per SION G- 7 of furnished Leather. Annexure "E" TEXTILE PRODUCTS Sl.No. Export Item Qty. Import Item Qty AllowedJ312 Wool / Silk blended 1 kg 1. Scoured 1.31 kg/kg content in the Shawls / Scraves / wool export product. Muffiers and made-ups OR Wool Top 1.21 kg/kg content in the export product. OR Wool Yarn 1.10 kg/kg content in the export product. 2. Spun Silk Yarn 1.05 kg/kg content in the export product.
Presented by eximkey.com