PN No. 23/(RE-99)/1997-2002 Dated 09-07-1999Attention is invited to Paragraph 7.8 of the Export and Import Policy 1997- 2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time.
2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended.
3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.
4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:-
CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A-2218, the new entries from Sl.No.A-2219 to A-2250 shall be added as per Annexure "B" to this Public Notice.
ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1408, the new entries from Sl.No.C-1409 to C-1426 shall be added as per Annexure "C" to this Public Notice.
PLASTIC PRODUCTS After the existing entry at Sl.No.H-406, the new entries from Sl.No.H-407 to H- 413 shall be added as per Annexure "D" to this Public Notice.
TEXTILE PRODUCTSAfter the existing entry at Sl.No.J-305, a new entry as Sl.No.J-306 shall be added as per Annexure "E" to this Public Notice.
5. This issues in Public interest.
Sd/-
(N.L. LAKHANPAL)
DIRECTOR GENERAL OF FOREIGN TRADE
(Issued from File No.01/83/44/19/AM99-DES-IV)Annexure "A" to the
Public Notice No.23
Dated: 9.7.1999
| Sl.No. | Page No. | Reference | Amendments/Corrections |
| (1) | (2) | (3) | (4) |
| 1. | 6 | Chemicals & Allied Products Sl.No.A2 | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| A2 | 1, (4-Hydroxy 3- Hydroxy Methyl Penyl) 2-(N-Ter- butyl-N-Benzyl Amino) Ethanol (Drug Intermedi- ate of Salbutamol Sulphate) | 1 kg | 1. Parahydroxy Aceto-phorone | 760. kg |
| 2. Tertiary Butylamine | 0.746 kg |
| 3. Sodium Boro- hydride | 0.365 kg |
| 4. Acetic Anhydride | 2.060 kgs |
| 5. Methylene Chloride | 4.080 kgs |
| 6. Chloroform | 3.070 kgs |
| 7. Methyl Isobutyl Ketone | 3.240 kgs |
| 2. | 9 | Chemicals & Allied Products Sl.No.A27
(As amended vide Publlic Notice No.52 Dated 5.11.98) | The description of the export product shall be amended to read as under:-
"4 4 Diamino Diphenyl Sulphone BP/ Dapsone BP". |
| 3. | 12 | Chemicals & Allied Products Sl.No.A46 | The norms covered by this entry shall be deleted. |
| 4. | 26 | Chemicals & Allied Products Sl.No.A123 | The description of the export product shall be amended to read as under:-
"Chloramphenicol Sodium Succinate Sterile". |
| 5. | 76 | Chemicals & Allied Products Sl.No.A504 | The description of the export product shall be amended to read as under:-
"Acid Red 19 CI Food Red 7, Ponceau 4 R (C.I. No.16255) Dye content 80%". |
| 6. | 97 | Chemicals & Allied Products Sl.No.A661 | The description of the export product shall be amended to read as under:-
"Fast Orange GC Base". |
| 7. | 160 | Chemicals & Allied Products Sl.No.A1208 | The description of the export product shall be amended to read as under:-
"Zinc Oxide Disulphurisation Catalyst (containing 65% Zinc)". |
| 8. | 181 | Chemicals & Allied Products Sl.No.A1481 | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| A1481 | Silicon Fluid | 1 kg | Low Molecular Weight Silanol/ Octamethyl CycloTetrasilo Siloxane/Siloxane 45-C/Dimethyl Cyclic/Hydrolizate | 1.04 kg |
| 9. | 188 | Chemicals & Allied Products Sl.No.A1545 | The description of the import item 9 shall be amended to read as under:-
"Refind Soyabean Oil conforming to specification of ASTM D-1462-70 or its equivalent". |
| 10. | 189 | Chemicals & Allied Products Sl.No.A1546 | The description of the import item 8 shall be amended to read as under:-
"Refind Soyabean Oil conforming to specification of ASTM D-1462-70 or its equivalent". |
| 11. | 189 | Chemicals & Allied Products Sl.No.A1547 | The description of the import item 9 shall be amended to read as under:-
"Refind Soyabean Oil conforming to specification of ASTM D-1462-70 or its equivalent". |
| 12. | 189 | Chemicals & Allied Products Sl.No.A1548 | The description of the import item 6 shall be amended to read as under:-
"Refind Soyabean Oil conforming to specification of ASTM D-1462-70 or its equivalent". |
| 13. | 189-190 | Chemicals & Allied Products Sl.No.A1549 | The description of the import item 5 shall be amended to read as under:-
"Refind Soyabean Oil conforming to specification of ASTM D-1462-70 or its equivalent". |
| 14. | 220-221 | Chemicals & Allied Products Sl.No.A1709 | The following note shall be added below this entry:-
"Item NBR shall be allowed only in case of Oil Resistant Rubber Hoses" |
| 15. | 255 | Chemicals & Allied Products Sl.No.A1877 | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| A1877 | Viscose Staple Fibre | 1 kg | 1. Caustic Soda Lye | 50. kg |
| 2. Wood Pulp | 1.05 kg |
| 3. Viscose Additive Auxirol GR | 0.001 kg |
| 16. | 269 | Chemicals & Allied Products Sl.No.A1999 | After import item No.1, the following alternative item with quantity shall be added:- |
"OR
1. Ortho Chloro Benzyl Cyanide | 1.50 kg". |
| 17. | 272 | Chemicals & Allied Products Sl.No.A2024 | After import item No.3, the following alternative item with quantity shall be added:- |
"OR
3. Boron Triflouride Gas | 0.76 kg". |
| 18. | 276 | Chemicals & Allied Products Sl.No.A2057 | The description of the import item 1 shall be amended to read as under:-
"CRCA/HR Sheets/ Coils/ Rods in Prime Condition or in Seconds/ Defective Condition". |
| 19. | 279 | Chemicals & Allied Products Sl.No.A2080 | The description of the import item shall be amended to read as under:-
"Pyridine Base/ Crude Pyridine (Average Pyridine content 60%)". |
| 20. | 282 | Chemicals & Allied Products Sl.No.A2130
(Introduced vide Public Notice No.37 dated 10.9.98) | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| A2130 | Disodium Cocoa- mido Sulfo-Succi- nate (Active Matter 36% Solid: 36% - 40%) | 1 kg | 1. Methyl Ester
OR | 177. kg |
| 1. Coconut Fatty Acid | 0.177 kg |
| 2. Monoethanolamine | 0.048 kg |
| 3. Maleic Anydride | 0.075 kg |
| 4. Sodium Sulfite | 0.097 kg |
| 21. | 282 | Chemicals & Allied Products Sl.No.A2164
(Introduced vide Public Notice No.63 Dated 24.12.98) | The norms covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| A2164 | 2,4 D Dimethyl amine Salt (580 gms/litre of 2,4 D Acid content) 58% w/w | 1 kg | 1. 2,4 Dichloro Phenoxy Acetic Acid
OR | 630. kg |
| 1. a)Phenol | 0.407 kg |
| 1. b)Monochloro Acetic Acid | 0.345 kg |
| 1. c)Caustic Soda | 0.290 kg |
| 2. Dimethyl Amine 40% w/w | 0.328 kg |
| 22. | 282 | Chemicals & Allied Products Sl.No.A2199
(Introduced vide Public Notice No.63 Dated 24.12.98) | The norms covered by this entry shall be deleted.
Please see entry at Sl.No.A2197. |
| 23. | The following note shall be added below these entries:-
"The above norm is valid upto 30.9.1999." |
| 24. | 372 | Engineering Products Sl.No.C2 | 1. After import item 8, the following item with quantity shall be added:- |
| "9. Powder for Coating content on | 0.02 kg/kg of export Product". |
2. Below this entry, after note 2, the following note shall be added:-
"Note.3: Powder for coating shall be allowed only if export product is Powder Coated." |
| 25. | 378-379 | Engineering Products Sl.No.C57 | 1. After import item 7, the following alternative item with quantity shall be added:- |
"OR
7. a)Polyol | 0.100 kg |
| 7. b)Isocynate | 0.066 kg |
Below this entry, after note 1, the following note shall be added:-
"Note.2: If the bicycle is exported with moulded P.U. Saddle, the import of Polyol & Isocynate to the extent of 100 gms and 66 gms respectively per Saddle shall be permitted. Corres pondingly, the quantity of the input at Sl.No.7 viz. PVC Compound/ Polypropylene/ Polystyrene shall be reduced by 158 gms. The description of resultant product shall be accordingly amended to read as "Bicycle with P.U. Saddle". |
| 26. | 382 | Engineering Products Sl.No.C105 | 1. After import item 3, the following alternative item with quantity shall be added:- |
"OR
3. a)Polyol | 100 gms |
| 3. b)Isocynate | 66 gms |
2. Below this entry following note shall be added:-
"Note: If the export product is of moulded P.U. Saddle, the import of Polyol & Isocynate as indicated shall be permitted instead of PVC Compound." |
| 27. | 421 | Engineering Products Sl.No.C253 | Below this entry the following note shall be added:
"Note2: For unplated conductors import of item No.4,5 & 6 shall not be allowed. |
| 28. | 441 to 444 | Engineering Products Sl.Nos.C324,C325, C326,C327, C328, C329, C330, C331, C332, C333, C334, C335 Below these entries, the following note shall be added:- | "Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input item No.3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted." |
| 29. | 489 | Engineering Products Sl.No.C485 | The description of the export product shall be amended to read as under:-
"Graphite electrode/ Carbon electrode/ Anodes/ Nipples/ Graphite Fine and Mix Graphite Products". |
| 30. | 523 | Engineering Products Sl.No.C565 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| C565 | Black Pipe/Precision Steel tubes/ Galvanised Pipes | 1 MT | 1. Hot rolled carbon steel Strips/plates/coil, other than high carbon steel | 1.05 MT |
| 2. Zinc (in case of Galvanized Pipe only) | 4% of the wt. of the Steel used in the export Products. |
| 31. | 530 | Engineering Products Sl.No.C632 | The description of the export product shall be amended to read as under:-
"Dowel Pin made out of CHQ Alloy Steel/Stainless Steel".
2. The description of the import item 1 shall be amended to read as under:-
"Relevant CHQ Alloy Steel/Stainless Steel Wire Rods in Coils or Bars". |
| 32. | 554 | Engineering Products Sl.No.C803 | The description of the export product Shall be amended to read as under:-
"Shoulder Bolt made out of CHQ AlloySteel/Stainless Steel".
2. The description of the import item 1 shall be amended to read as under:-
"Relevant CHQ Alloy Steel/Stainless Steel Wire Rods in Coils or Bars". |
| 33. | 566 | Engineering Products Sl.No.C875 | After import item 7, the following item with quantity shall be added:- |
| "Lubra Strips | Net to Net". |
Below this entry, the following Note shall be added:-
"Note.1 Lubra Strips shall be allowed if the product exported is with Lubra Strip." |
| 34. | 566 | Engineering Products Sl.No.C876 | After import item 4, the following item with quantity shall be added:- |
| "Lubra Strips | Net to Net". |
Below this entry, the following Note shall be added:-
"Note.1 Lubra Strips shall be allowed if the product exported is with Lubra Strip." |
| 35. | 575 | Engineering Products Sl.No.C934 | The description of the import item 1 shall be amended to read as under:-
"Tungsten Carbide Powder/ Tungsten Carbide Mixed Powder". |
| 36. | 609 | Engineering Products Sl.No.1058 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| C1058 | Lead Acid Storage Batteries of all types/ Battery Cells | 1 No. | 1. Pure Lead | 1.02 kg/ kg content in export product |
| 2. Antimony or 2. Antimonial Lead Alloy | 1.02 Kg/kg content in export product |
3. Battery Separators
OR | Net to Net |
| 3. Rolls of Battery Separators | 1.05 Sq.Mtr./ Sq.Mtr. content |
| 4. Tubular Bags | Net to Net |
5. Relevant Battery Containers & Lids.
OR | Net to Net |
| 5. Polypropylene Granules | 1.05 kg/kg content the export product |
| 6. Battery Vent Plugs | Net to Net |
| 7. Polarity Indicator Rings | Net to Net |
| 8. Rubber Grommet | Net to Net |
| 9. Electrolytic Pure Tin | Net to Net |
| 10. Lignin | 1.02 kg/kg content in export product |
| 37. | 649 | Engineering Products Sl.No.C1221 | The description of the import item 1 shall be amended to read as under:-
"Styrene Butadiene Rubber (SBR) 1502".
The description of export product shall accordingly been amended as "Heavy Duty Hard Rubber Battery containers made out of minimum 20% Styrene Butadiene Rubber (SBR) 1502". |
| 38. | 661 to 662 | Engineering Products Sl.No.C1302 | After import item-Aluminium Sheet, of item 1, the following item with quantity as alternative item shall be added:- |
"OR
Aluminium Alloy Ingot (CG grade/EC grade) | 1.01 kg |
| 39. | 663 | Engineering Products Sl.No.1312 | The following import item as alternative item to Aluminium Sheet at import item 1, shall be added:-
"OR Relevant Glass Reinforced Plastics Enclosures. Net to net to be accounted for in export product |
| 40. | 663-664 | Engineering Products Sl.No.C1314 | The description of the export product shall be amended to read as under:-
"Silver Brazing Alloys in the form of Strips/ Wire/ Powder/ Foil/ Blanks/ Discs/ Profile/ Sheet/ Rod as per ASTM/ JIS/ DIN/ BIS/ IBS standard or equivalent". |
| 41. | 664-665 | Engineering Products Sl.No.C1320 | The description of the import item 16, shall be amended to read as under:-
"PVC Tubes or Nylon Knitted Texture Tube". |
| 42. | 692 | Engineering Products Sl.No.C1383
(Introduced vide P.N. No.52 dated 5.11.98 | The description of the export product shall be amended to read as under:-
"Automobile Oil Filter/Fuel Filter".
The description of the import item 1, shall be amended to read as under:-
"1. CRCA Sheet/Coil"
The description of the import item 2, shall be amended to read as under:-
"2. Filter Paper of Mean Pore size 4-14 Micron for Fuel Filter and Mean Pore 25-45 Micron for Oil Filter". |
| 43. | 692 | Engineering Products Sl.No.C1391 (Introduced vide P.N. No.63 dated 24.12.98 | The description of the export item shall be amended to read as under:-
"Mechanical Spray Pump (15mm to 20mm)".
2. The description of the import item 2 shall be amended to read as under:-
"Stem (Polyacetal)".
3. After import item No.7, the following alternative item with quantity shall be added:- |
"OR
7. Aluminium Ferrule | Net to net." |
| 44. | 692 | Engineering Products Sl.No.C1394
(Introduced vide P.N. No.63 dated 24.12.98 | The norms covered by these entries shall be substituted by the following:- |
| Sl.No | Qty | Allowed |
| C1394 | All Aluminium Alloy Conductors | 1 kg | 1. a)Primary Un-alloyed Aluminium | 1.02 kg/ kg content in export. |
| 1. b)Magnesium | 1.10 kg/ kg content in export. |
1. c)Silicon
OR | 1.075 kg/ kg content in export. |
2. Aluminium Alloy Ingots/T-Bars/ Sows
OR | 1.01 kg/ kg content in export. |
| 3. Aluminium Alloy Wire Rod | 1.01 kg/ kg content in export. |
| 45. | 718 | Food Products Sl.No.E27 | After import item 1, the following alternative item with quantity shall be added:- |
"OR
Tin Plate Prime | 1.30 kg/kg content in the export product." |
| 46. | 727 | General Note for Leather & Leather Products Sl.No.6 | The existing note shall be amended to read as under:-
"6. Wherever import of Dyes have been allowed, the same would mean Dyes of 100% strength (assay). In addition to quantity limit fixed, the CIF value of dyes shall not exceed 6% of FOB value of exports." |
| 47. | 727 | General Note for Leather & Leather Products Sl.No.7 | After the existing note at Sl.No.6, the following note as Sl.No.7 shall be added:-
"7. For manufacture of leather products, wherever a request is made for import of processing chemicals for making finished leather, the same may be allowed as per standard norms available at Sl.No.G7(a) or G7(b), as the case may be, provided the final leather product is manufactured out of finished leather made from Hide of Cow/ Buffalo or Skins of Goat/ Sheep/ Calf in the exporter’s own tanning unit or in the tanning unit of exporter’s supporting manufacturer so declared and endorsed in the DEEC Book." |
| 48. | 735 | Leather & Leather Products Sl.No.G7(a) (As amended vide Public Notice No.3 dated 5.4.1999) | In case of export of Suede and Nubuck leather, the quantity of the import item 24 i.e. Dyes shall be enhanced to "20 kgs (Out of the total quantity of 20 kgs, the quantity of Reactive Dyes shall not exceed 0.6 kg)".
The description and quantity of import item No.37 shall be amended to read as under:-
"(i) Oil for pull up Finish- 15 kgs
(ii) Wax for pull up - 10 kgs Finish |
| 49. | 735 | Leather & Leather Products Sl.No.G7(b) (As amended vide Public Notice No.3 dated 5.4.1999) | The quantity of import item No.19 shall be amended to read as "20 kgs". |
| 50. | 734,743,752 to 755, 775 to 778 and 783 to 784 | Leather & Leather Products Sl.Nos.G6, G12, G19, G20, G21, G36, G37, G38 and G42 | The import items at Sl. No.2 alongwith its quantities shall be deleted. |
| 51. | 728 to 732, 735 to 742, 745 to 751, 755 to 775 and 782 to 783 | Leather & Leather Products Sl.Nos.G1, G2, G3, G8, G9, G10, G13, G14, G15, G22, G23, G24, G25, G26, G27, G28, G29, G33, G35, G40 and G41 | The import items at Sl. No.3 alongwith its quantities shall be deleted. |
| 52. | 778 to 780 | Leather & Leather Products Sl.No.G39 | The import item at Sl. No.6 alongwith its quantities shall be deleted. |
| 53. | 802-803 | Plastic Products Sl.No.H61 | The norms covered by these entries shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| H61 | Coloured Nylon 66 or 610 Mono- filament Yarn (Dia 0.1 - 0.4 mm) in Cut Hanks upto maximum length of 45" for Tooth Brush | 1 kg | 1. Nylon 66/610 (Relevant Nylon to be allowed) | 13. kg |
| 2. Relevant Colour Master Batch | 0.02 kg |
| 54. | 803 | Plastic Products Sl.No.H237 | The description of the export product shall be amended to read as under:-
"Polyurethane Resin Solution containing 66% Resin in Ethyl Acetate/ Methyl Ethyl Ketone Solvent". |
| 55. | 851 | Plastic Products Sl.No.H280 | The description of the export product shall be amended to read as under:-
"PVC Flexible Sheet/Film". |
| 56. | 871 | Plastic Products Sl.No.H376 | The description of the import items alongwith quantity shall be amended to read as under:- |
| "1. Polycarbonate Powder | 0.771 kg |
| 2. SAN Powder | 0.157 kg |
| 3. ABS Powder | 0.115 kg" |
| 57. | 875 | Sports Goods Sl.Nos.I13, I14 & I19 | The description of the import item 1, against these entries shall be amended to read as under:-
"Relevant PVC/PU Leather Cloth". |
| 58. | 875 | Sports Goods Sl.No.I25 (Introduced vide Public Notice No.63 Dated 24.12.98) | The description of the import item 1, against these entries shall be amended to read as under:-
"Relevant PVC/PU Leather Cloth". |
| 59. | 884 | Textile Products Sl.No.J20 | The norm covered by this entry shall be deleted. |
| 60. | 888 | Textile Products Sl.No.J31 | Below this entry, the following note shall be added:-
"Note: Fabric made out of Polyester cotton Dyed Blended Yarn shall also get Covered within the ambit of above Mentioned resultant product." |
| 61. | 889 | Textile Products Sl.No.J34 | The norm covered by this entry shall be substituted by the following:- |
| Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| J34 | Finished Flax Blended Fabrics (Grey or Dyed) containing Polyester/ Viscose/ Cotton/ Flax | 1 kg | 1. Flax Fibre
OR | 1.843 kg/kg ofFlax Fibre content in the export product |
1. Flax Yarn
OR | 1.07 kg/kg of Flax content in the export product. |
1. Flax Blended Yarn
OR | 1.11 kg/kg content in the export product |
| 1. Flax Blended Fabrics (Grey) | 1.05 kg/kg content in the export product |
2. Polyester Fibre
OR | 1.115 kg/kg of Polyester content in the exportproduct |
| 2. Polyester Yarn | 1.065 kg/kg of Polyester content in the exportproduct |
3. Viscose Fibre
OR | 1.115 kg/ kg of Viscose content in the exportproduct |
| 3. Viscose Yarn | 1.065 kg/kg of Viscose content in the export product |
| 4. Disperse Dyes of 100% Strength | 2% of weight of Polyester content in the export product |
| 5. Vat Dyes of 100% Strength | 0.015 kg/kg of Flax, Viscose and Cotton content in the export product |
| Note: Items 4 and 5 shall be allowed only if export product is Dyed one. |
| 62. | 902 and 903 | Textile Products Sl.No.J80 | After import item 2, the following items with quantity shall be added:- |
| "3. Synthetic Clipping | 1.15 kg/kg content in the export product. |
| 4. Pulled or Garnetted | 1.05 kg/kg Fibres made out of content in the Woollen and/or export product Synthetic Rags/Clippings/ Hard waste |
| 63. | 910 | Textile Products Sl.No.J126 | The quantity of import item 1 shall be amended to read as under:-
"1.40 kg/kg content in the export product." |
| 64. | 914 | Textile Products Sl.No.J148 | The description of the export product shall be amended to read as under:-
"Boys Shorts".
The description of the import item shall be amended to read as under:-
"Relevant Fabric". |
| 65. | 924 and 925 | Textile Products Sl.No.J233 | After import item 7, the following items with quantity shall be added:- |
| "8. Woollen/Synthetic | 1.30 kg/kg Clipping content in the export product. |
| 9. Pulled or Garnetted | 1.11 kg/kg Fibres made out of content in the Woollen and/or export product Synthetic Rags/ Clippings/ Hard waste |
| 66. | 902 and 903 | Textile Products Sl.No.J249 | After import item 2, the following items with quantity shall be added:- |
| "3. Woollen Clipping | 1.15 kg/kg content in the export product. |
| 4. Pulled or Garnetted | 1.05 kg/kg Fibres made out of content in the Woollen and/or export product Synthetic Rags/ Clippings/ Hard waste |
| 67. | 914 | Textile Products Sl.No.J305 (Introduced vide Public Notice No.3 Dated 5.4.99) | The description of the export product shall be amended to read as under:-
"100% Natural Silk Made ups made of relevant Silk Fabrics (including Dyed and/or Printed and/or Embroidered and of relevant GSM with variation of +/- 10%".
The description of the import item 1 shall be amended to read as under:-
"Relevant 100% Natural Silk Fabrics (Including Dyed and/or Printed and/or Embroidered and of relevant GSM With variation of +/- 10%". |
| 68. | 934 | Miscellaneous Products Sl.No.K3 | The description of the export product shall be amended to read as under:- "Rennet Casein/ Acid Casein (Industrial Grade) having protein content 80-85%." |
Annexure "B" to the
Public Notice No.23
Dated: 9.7.1999
CHEMICALS AND ALLIED PRODUCTS | Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| A2219 | N-Acetyl Sulpha-Nilyl Chloride | 1 kg | 1. Acetanilide | 0.917 kg |
| A2220 | 4-Niro-3, 5 Dimethyl-2-Hydroxy Methyl Pyridine (PNH Base) | 1 kg | 1. 2,3,5 Collidine | 1.32 kg |
| 2. Methylene Chloride | 10.00 kgs |
| 3. Methanol | 1.00 kg |
| 4. Isopropyl Alcohol | 2.00 kgs |
| A2221 | Methyl Ethyl Ketone | 1 kg | 1. Butene
OR | 0.897 kg |
| 1. Secondary Butyl Alcohol | 1.050 kg |
| 2. Antifoam | 0.176 kg |
| 3. Catalyst (Copper Layed on diamac- eous earth carrier) | 0.050 kg |
| A2222 | Secondary Butyl Alcohol | 1 kg | 1. Butene | 0.854 kg |
| 2. Antifoam | 0.168 kg |
| A2223 | 2,4 Dichloro Meta Xylenol or 2,4 Dichloro 3,5 Xylenol | 1 kg | 1. 3:5 Xylenol | 0.830 kg |
| 2. Perchloro Ethylene | 0.305 kg |
| A2224 | Para Chloro Meta Xylenol (4-Chloro 3,5 Xylenol or 4-Chloro Metan Xylenol | 1 kg | 1. Meta Xylenol (3,5 Xylenol) | 0.92 kg |
| 2. Per Chloro Ethylene | 0.305 kg |
| A2225 | Triethylene Glycol | 1 kg | 1. Ethylene | 0.759 kg |
| 2. Silver Catalyst (S-860) or equivalent | 0.003 kg |
| 3. Molecular Sieves | 0.001 kg |
| 4. Pluronic PE (Antifoam) | 0.00005 kg |
| 5. Activated Carbon | 0.0006 kg |
| 6. Activated Alumina | 0.0005 kg |
| A2226 | 5-Sulfo Salicylic Acid | 1 kg | 1. Phenol | 0.600 kg |
| A2227 | Para Cresyl Methyl Ether or 4 Methoxy Toluene or Para Methyl Anisole | 1 kg | 1. Para Cresol | 1.035 kg |
| 2. Caustisc Soda | 0.600 kg |
| A2228 | Ethylene Glycol Disterate (Assay 98% Minimum) | 1 kg | 1. Stearic Acid AV Molecular weight 268 C 16 content: 52% - 58% C 18 content: 40% - 45% | 0.941 kg |
| A2229 | N.N. Diethyl M-Toluamide (Minimum purity 97%) | 1 kg | 1. Diethyl Amine | 0.425 kg |
| 2. Meta Toluic Acid/3 Methyl Benzoic Acid | 0.783 kg |
| A2230 | Rhodamine 6 GDN (Basic Red 1)C.I. No.45160 | 1 kg | 1. 2-Ethyl Amine Paracresol (Purity 95%) | 0.950 kg |
| A2231 | Halothane BP | 1 kg | 1. Chloro Trifluoro Dibromo Ethane | 1.714 kg |
| A2232 | Acyclovir | 1 kg | 1. Guanine | 1.20 kg |
| 2. 1,3 Dioxlane | 1.39 kg |
| 3. Acetone | 1.85 kg |
| 4. Dimethyl Amine | 1.25 kg |
| 5. Acetic Anydride | 2.17 kgs |
| A2233 | Para Chloro Benzoyl Chloride | 1 kg | 1. Para Chloro Benzoic Acid | 1.00 kg |
| A2234 | Vat Violet 13 CI No.68700 (Vat Violet XBN) Dye Content 98% | 1 kg | 1. 1,5 Dichloro Anthraquinone | 1.136 Kg |
| 2. Anthranilic Acid | 2.070 kg |
| 3. Copper Acetate | 0.097 kg |
| 4. Magnesium Oxide | 0.343 kg |
| 5. Potassium Hydroxide | 1.155 kg |
| A2235 | Vat Orange 15 CI No.69025 (Vat Orange 3G) Dye Content 98% | 1 kg | 1. 1,5 Dichloro Anthraquinone | 1.218 kg |
| 2. Para Toluene Sulphonamide | 0.804 kg |
| 3. Benzoyl Chloride | 0.594 kg |
| 4. Ortho Dichloro Benzene | 1.463 kg |
| 5. Nitrobenzene | 0.640 kg |
| 6. Cuprous Chloride | 0.028 kg |
| 7. Copper Sulphate Mono Hydrate | 0.055 kg |
| 8. Sodium Di-Chromate | 1.380 kg |
| 9. Sodium Carbonate | 0.852 kg |
| 10. Potassium Carbonate | 0.875 kg |
| A2236 | Vat Green 9 CI No.59850 (Vat Black NB) Dye Content 98% | 1 kg | 1. Benzanthrene | 1.008 kg |
| 2. Methanol | 0.372 kg |
| 3. Cellosolve (2-Ethoxy Ethanol) | 0.980 kg |
| 4. M-Nitro Benzene Sulphonic Acid | 0.302 kg |
| 5. Potassium Hydroxide | 1.741 kg |
| 6. Sodium Hydroxide | 0.074 kg |
| A2237 | Tulabase Fast Yellow RL | 1 kg | 1. C-Acid | 0.800 kg |
| 2. M-Toluidine | 0.282 kg |
| 3. Sodium Nitrite | 0.185 kg |
| 4. Sodium Acetate | 0.750 kg |
| 5. Caustic Soda | 0.130 kg |
| 6. Sodium Carbonate | 0.738 kg |
| 7. Sulphonic Acid | 0.005 kg |
| A2238 | Direct Yellow HR (Direct Yellow86) CI No.29325 Dye content 60% | 1 kg | 1. C-Acid | 0.388 kg |
| 2. M-Toluidine | 0.137 kg |
| 3. Sodium Nitrite | 0.088 kg |
| 4. Sodium Acetate | 0.083 kg |
| 5. Caustic Soda | 0.036 kg |
| 6. Sodium Carbonate | 0.321 kg |
| A2239 | Direct Red 79 (Direct Supra Light Fast Red 6B H/C) Dye content 85% | 1 kg | 1. H- Acid | 0.752 kg |
| 2. Benzene Sulphonyl | 0.472 kg |
| 3. P-Cresidine | 0.247 kg |
| 4. Sodium Nitrite | 0.129 kg |
| 5. Sodium Acetate | 0.608 kg |
| 6. Sodium Hydroxide | 0.436 kg |
| 7. Sodium Carbonate | 0.533 kg |
| A2240 | Vat Black 25 (Vat Olive TN Micropede) Dye content 40% | 1 kg | 1. Benzanthrone | 0.149 kg |
| 2. 1 Amino Anthraquinone | 0.266 kg |
| 3. Liquid Bromine | 0.108 kg |
| 4. Nitrobenzene | 0.297 kg |
| 5. Cellosolve (2-Ethoxy Ethanol) | 0.179 kg |
| 6. M.Nitrobenzene Sulphonic Acid Sodium Salt (Resist Salt) | 0.149 kg |
| 7. Sulphuryl Chloride | 0.112 kg |
| 8. Sodium Carbonate | 0.241 kg |
| 9. Sodium Hydroxide | 1.125 kg |
| 10. O-Cresol | 0.047 kg |
| 11. Crisilic Acid | 0.230 kg |
| 12. Sulphanilic Acid | 0.239 kg |
| 13. Formaldehyde (40%) | 0.261 kg |
| A2241 | Sodium Methyl Hydroxy Benzoate BP | 1 kg | 1. Para Hydroxy Benzoic Acid | 0.90 kg |
| 2. Caustic Soda | 0.24 kg |
| 3. Methanol | 0.50 kg |
| A2242 | Oxtriphylline Choline Theo-phyllinate BP/USP | 1 kg | 1. Theophylline | 0.80 kg |
| A2243 | O-Benzyl Salbutamol | 1 kg | 1. Sodium Dihydro Bis (2-Methoxy Ethoxy Aluminate 70% Active in Toluene (Vitride)
OR | 2.37 kgs |
| 1. a)Sodium Borohydride | 0.55 kg |
| 1. b)Diglyene | 3.70 kgs |
| 2. Sodium Boro-Hydride | 0.15 kg |
| 3. Selenium Dioxide | 0.72 kg |
| 4. 1,4 Dioxane | 2.42 kgs |
| 5. Turtiary Butyl-Amine | 0.77 kg |
| 6. Palladium Charcoal | 0.032 kg |
| 7. Dimethyl Sulfoxide | 1.64 kg |
| A2244 | Erythromycin Oxime Base | 1 kg | 1. Erythromicin Thiocyanate
OR | 1.20 kg |
| 1. Erythromycin Base | 1.27 kg |
| 1. Isopropanol | 0.78 Ltr. |
| 2. Hydroxylamine Hydrochloride | 0.60 kg |
| A2245 | Cyfluthrin 10% WP (Solfac WP10) | 1 kg | 1. Cyfluthrin Tech. Purity 95% minimum | 0.107 kg |
| A2246 | 4-Amino-2-[(4-1, 4 Benzodioxan-2-Dioxan-2-Carbo-nyl) Piperizin-1-Y1] 6,7-Dimeth-Oxy Quinozoline Monomethane Sulfonate (DOXAZOSIN MESYLATE) | 1 kg | 1. 6,7 Dimethoxy Quinozoline-2,4 Dione | 2.05 kgs |
| 2. N-(1,4-Benzo-Dioxan-2-YL-Carbonyl)-Pipera-zine | 1.29 kg |
| 3. Methane Sulfonic Acid | 0.29 kg |
| 4. Dimethyl Acetamide | 0.54 kg |
| 5. Tetrahydrofuran | 2.83 kgs |
| 6. Dimethyl Formamide | 1.80 kg |
| 7. Methanol | 4.90 kgs |
| A2247 | 4(S)-Benzyl Oxza-olidinone (-BOZ) | 1 kg | 1. L-Phenyl Alanine | 2.479 kgs |
| 2. Sodium Borohydride | 1.90 kg |
| 3. Ethyl Chloroformate | 1.05 kg |
| 4. Methanol | 8.49 ltrs. |
| 5. Isopropyl Alcohol | 3.98 ltrs. |
| 6. Toluene | 1.657 ltrs. |
| A2248 | 2,4 D Dimethyl-amine Salt (720 gms/litre of 2,4 D Acid content) 72% w/w | 1 Ltr. | 1. 2,4 Dichloro Phenoxy Acetic Acid (97%)
OR | 0.781 kg |
| 1. a)Phenol | 0.500 kg |
| 1. b)Mono Chloro Acetic Acid | 0.415 kg |
| 1. c)Caustic Soda | 0.350 kg |
| 2. Dimethylamine 40% w/w (Aquous solution) | 0.400 kg |
| A2249 | Di-Teributyl Dicarbonate (DIBOC) | 1 kg | 1. Sodium Tertiary Butoxide | 1.47 kg |
| 2. Para Toluene Sulfonyl Chloride | 1.47 kg |
| 3. N,N,N,N, Tetra Methyl Ethlene Diamine | 0.044 kg |
| A2250 | Cinnamic Acid | 1 kg | 1. Benzaldehyde
OR | 1.08 kg |
| 1. Toluene | 2.01 kgs |
| 2. Acetic Anhydride | 1.26 kg |
| 3. Sodium Acetate | 0.85 kg |
| 4. Activated Carbon | 200 gms |
| 5. Soda Ash | 0.47 kg |
Annexure "C" to
Public Notice No.23
Dated: 9.7.1999
ENGINEERING PRODUCTS | Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| C1409 | Alloy Iron Powder Grade - FeCrMo (Cromaloy) | 1000 kgs | 1. M.S. Scrap | 1085 kgs |
| 2. Low Carbon Ferro Chrome Lumps | 49.9 kgs |
| 3. Low Carbon Ferro Molybdenum | 8 kgs |
| C1410 | Carbon/ Alloy Steel Seamless Tubes/ Pipes (Cold Finished) | 1 MT | 1. Carbon/ Alloy Steel Pipes/ Tubes (Hot Finished) Grade: ASTM A192 | 1.075 MT |
| C1411 | High Speed Steel (Non-Cobalt Grade) Tool Blanks (4 mm to 10 mm Dia) | 1 kg | 1. High Speed Steel (Non-Cobalt Grade) Wire/Rod/Coils | 1.10 kg/kg content in export product. |
| C1412 | AA/R6 Dry Cell Battery (Paper Jacket) | 1 No. | 1. Electolytic Manganese Dioxide | 3.92 gms |
| 2. Acetylene Black | 0.65 gm |
| 3. Zinc (Battery Grade) | 1.44 gms |
| 4. LDPE | 0.38 gm |
| 5. Tin Plate (Electrolytic) for Bottom Plate | 0.50 gm |
| C1413 | Dry Battery Cell (Zn Cl), R-20 Paper Jacket/ R-20 Paper Metal Jacket Premium Battery (asper IS-8144) | 1 No. | 1. Manganese Dioxide | 1.16 gms |
| 2. Acetylene Black | 2.65 gms |
| 3. Natural Manganese Ore (Powder) | 11.60 gms |
| 4. Zinc (Battery Grade) | 13.64 gms |
| 5. LDPE | 1.18 gms |
| 6. Graphite Lubricant | 0.5% of FOB value. |
| 7. Electrolytic tin plate (for top bottam and cylindrical jacket) | 14.5 gms |
| Note: Import item No.7 to be allowed only when Metal Jacket Premium Battery is exported. |
| C1414 | Lever Arch Mechanism (Index File Clip) with or without Slide-in-Plate | 1 kg | 1. Cold Rollled Steel Strips/ Sheets (Coated or Uncoated) | 1.40 kg/kg content in the export product. |
| 2. MS Wire Rod | 1.05 kg/kg content in the export product. |
| C1415 | Cold Rolled Formed (Sections of Collapsible Gates) | 1 MT | 1. HR Coil | 1.08 MT |
| C1416 | Alloy Iron Powder Grade - FeCu 80:20 | 1 kg | 1. M.S. Scrap | 880 gms |
| 2. Oxygen Free High Conductivity Copper Ingots | 220 gms |
| C1417 | Dry Cell (Zinc Chloride) Metal Jacket, R-14 Battery as per IS-8144 | 1 No. | 1. Manganese Dioxide (electrolytic)/ Manganese Ore Powder | 0.65 gms |
| 2. Acetylene Black | 1.66 gms |
| 3. Zinc (Battery grade) | 8.52 gms |
| 4. LDPE | 8.0 gms |
| 5. Tin Plate electrolytic | 8.55 gms |
| 6. Graphite Powder | 0.5% of FOB value |
| C1418 | Cast Iron Castings (Mini blast Furnace and Cupola route) | 1000 kgs | 1. Low Ash Metallurgical Coke (Ash contents below 15%) | 495 kgs. |
| C1419 | 1 Core X 1000 Sq.mm 1.1 KV Grade Aluminium XLPE insulated cable | 1 Km | 1. Aluminium rod E.C. grade having 99.6% purity (min.) | 2745 Kg. |
| 2. XLPE Compound | 450 Kg. |
| 3. PVC Resin | 205 Kg. |
| C1420 | Fine Cobalt Powder Grain size 1-1.5 micron | 1 Kg | 1. Cobalt granules/ briquettes | 1.050 Kg. |
| C1421 | Electrode Holder | 1 Kg. | 1. Copper bar/ingot | 1.05 kg/kg content |
| 2. Spring Steel wire | 1.02 kg/kg content |
| 3. M.S.Wire/rod | 1.10 kg/kg content |
| 4. CRCA Sheet | 1.20 kg/kg content |
| 5. ABS Moulding | 1.05 kg/kg content |
| 6. Silicon Rubber | 1.05 kg/kg content |
| C1422 | Copper Conductors (continuously transposed containing 5 to 31 enamelled strips) | 1 Kg. | 1. C. Cast Copper Rod (EC Grade) | 1 Kg. |
| 2. Insulating Paper | 7 gms |
| 3. High density kraft paper | 4 gms |
| C1423 | Aluminium bottles/cans | 1 MT | 1. Aluminium Ingot | 1.05 MT |
| C1424 | Woven Asbestos Free Clutch Facings | 1 Kg | 1. Glass Rovings | 0.520 kg |
| 2. Nitrile Rubber | 0.207 kg |
| 3. Phenol Formaldehyde Resin (Powder Phenol Resin) | 0.095 kg |
| 4. Magnesium Oxide | 0.050 kg |
| 5. Potassium Titanate | 0.040 kg |
| 6. Kevlar Dry Pulp | 0.004 kg |
| C1425 | Insulated Adjacent Jumpers (25A, 1.34 gms. weight) | 1 No | 1. Copper contact | 1 No. |
| 2. Polyamide (6.6) Grey | 1.08 gms. |
| C1426 | G-DS Clamp 2 Pole Grey | 1 No | 1. Wire Protect | 2 Nos. |
| 2. Contact Pin | 2 Nos. |
| 3. Screws | 2 Nos. |
| 4. Polyamide (6.6) Gredy | 1.18 gms. |
Annexure "D" to the
Public Notice No.23
Dated: 9.7.1999
PLASTIC PRODUCTS | Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| H407 | PVC Lace Table covers with film backing (square/ rectangular type) | 1 Sq. mtr. (Net wt. Also to be indi-cated) | 1. PVC Film of Relevant thickness | 1.10 kg/kg content in the export product. |
2. Raw material for 1 kg Plastisol (coating weight):
2. i)PVC Resin | 0.603 kg |
| 2. ii)PVC Plasticizer | 0.510 kg |
| 2. iii)PVC Stabilizer | 0.012 kg |
| 2. iv)Pigments | 0.035 kg |
| Note: The applicant shall declare the coating weight in the export product and in the application for the licence. |
| H408 | PVC Lace Table covers with film backing (Circular/ Oval type) | 1 Sq. mtr. (Net wt. Also to be indi-cated) | 1. PVC Film of Relevant thickness | 1.30 kg/kg content in the export product. |
2. Raw material for 1 kg Plastisol (coating weight)
2. i)PVC Resin | 0.696 kg |
| 2. ii)PVC Plasticizer | 0.572 kg |
| 2. iii)PVC Stabilizer | 0.013 kg |
| 2. iv)Pigments | 0.034 kg |
| Note: The applicant shall declare the coating weight in the export product and in the application for the licence. |
| H409 | PVC Crochet Table cover with film backing (square/ rect- angular/Circular/Oval type) | 1 Sq. mtr. (Net wt. Also to be indi-cated) | 1. PVC Resin | 0.624 kg |
| 2. PVC Plasticizer | 0.528 kg |
| 3. PVC Stabilizer | 0.012 kg |
| 4. Pigments | 0.036 kg |
| H410 | PVC Lace Table Mats/Covers/ Doilesy Meter | 1 Sq. mtr. (Net wt. Also to be indi-cated) | 1. PVC Film of Relevant thickness | 1.32 kg/kg content in the export product. |
2. Raw material for 1 kg Plastisol (coating weight):
2. i)PVC Resin | 0.676 kg |
| 2. ii)PVC Plasticizer | 0.572 kg |
| 2. iii)PVC Stabilizer | 0.013 kg |
| 2. iv)Pigments | 0.039 kg |
Note: 1. The applicant shall declare the coating weight in the export product and in the application for the licence.
2. In case of Rectangular product the quantity of PVC Film would be reduced to 1.10 kg/kg content in the export product. |
| H411 | PVC Metallic Mat | 1 Sq. mtr. | 1. Relevant PVC Metallic Film | 1.08 kg/kg content in the export product. |
| H412 | PVC with Non-Woven Backing Film Apron | 1 No. | 1. PVC Film with Non-Woven Poly-Propylene Film Backing | 1.08 kg/kg content in the export product. |
| H413 | PVC Laundry Bag | 1 No. | 1. Relevant PVC Film | 1.08 kg/kg content in the export product. |
Annexure "E" to the
Public Notice No.23
Dated: 9.7.1999
TEXTILE PRODUCTS | Sl.No. | Item of Export | Qty. | Item of Import | Qty. Allowed |
| J306 | Polyester Woven Lebels | 1 kg | 1. Texturised Polyester Filament Yarn | 1.05 kg/ kg content in the export product. |
Presented by eximkey.com