Eximkey - India Export Import Policy 2004 2013 Exim Policy
DGFT Notification, Circulars... Public Notices Public Notices w.e.f 01/04/1997 PN No. 71/(RE-97)/1997-2002 Dated 19-02-1998
EXIM PN NO. 71(RE-97)/1997-2002 DATED 19-2-1998


Attention is invited to Paras 7.8, 7.9 and 7.10 of Procedures, Vol. 1, 1997-2002, published under the Ministry of Commerce Public Notice No. 1/1997-2002 dated 31.3.1997 and Handbook of Procedure, Vol.2, 1997-2002 published under the Ministry of Commerce Public NoticeNo. 2/1997-2002 dated 31.3.1997.

2. In the statement of Standard Input-Output Norms as contained in the Handbook of Procedure, Vol. 2, amendments/corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made.

3. In the statement of Standard Input-Output Norms, following additions shall be made at appropriate places as mentioned below :-
 

CHEMICALS AND ALLIED PRODUCTS

(1) After Entry No. A-2007, the new entries from Sl.No. A-2008 to A-2026 shall be added as per Annexure "B" to this Public Notice.
 

ELECTRONICS PRODUCTS

(2) After Entry No. B-213, the new entries from Sl.No.B-214 to B-221 added as per Annexure "C" to this Public Notice.
 

ENGINEERING PRODUCTS

(3) After Entry No. C-1318, the new entries from Sl.No. C-1319 to C-1328 shall be added as per Annexure "D" to this Public Notice.
 

PLASTIC PRODUCTS

(4) After Entry No. H-367, the new entries from Sl.No. H-368 to H-370 shall be added as per Annexure "E" to this Public Notice.
 

TEXTILE PRODUCTS

(5) After Entry No. J-269, the new entries from Sl.No. J-270 to J-297 shall be added as per Annexure "F" to this Public Notice.
 

MISCELLANEOUS PRODUCTS

(6) After Entry No. K-108, the new entry as Sl.No. K-109 shall be added as per Annexure "G" to this Public Notice.

This issues in public interest.
 

Annexure "A" to Public Notice No. 71 Dated 19.02.98
AMENDMENTS / CORRECTIONS

Sl. No. Page No. Reference Amendments/Corrections
(1) (2) (3) (4)
1.   Public Notice No. 56 Dated 13.11.97 Sl.No. 2 of Annexure "A" The reference of "Sl.No. A108" in the Public Notice shall be corrected to read as "Sl.No. A109"
2. 43 Chemicals & Allied Products Sl.No. A226 The norms covered by this entry shall be substituted by the following :-

Sl. No. Export Item Import Item
Name Qty. Name Qty.
(1) (2) (3) (4) (5)
A226 Ethambutol Hydrochloride BP / USP 1 kg 1. Dl-2-Aminobutanol 1.25 kg
2. Monosodium Glutamate 0.90 kg
3. Isopropanol Alcohol / Methanol 2.00 kgs
4. Methyl Ethyl Ketone / Toluene / Ethlene Dichloride 0.90 kg
5. Potassium Carbonate

OR		 2.20 kgs
5. Sodium Hydroxide 1.42 kgs
6. Citric Acid 2.00 kgs
3. 87 Chemicals & Allied Products Sl.No. A610 The descriptions of the import items 1, 2, and 4 shall be corrected to read as under :-

"1. 3-Amino-4-Methoxy Acetanilide
2. Liquid Bromine
3. Sodium Ligno Sulfonate."
4. 114 Chemicals & Allied Products Sl.No. A831 The norms covered by this entry shall be substituted by the following :-

(1) (2) (3) (4) (5)
A831 Reactive Black 5 (CI No. 20505) (Dye content 58%) 1 kg 1. H. Acid 0.220 kg
2. Vinyl Sulphone Acetanilide Base

OR		 0.380 kg
2. (a) N-Acetyl Sulphanilyl Chloride 0.380 kg
2. (b) Sodium Bisulphite 0.213 kg
2. (c) Caustic Soda Flakes 0.380 kg
5. 162 Chemicals & Allied Products Sl.No. A1236 The quantity of import item 1 shall be amended to read as "0.941 kg".
6. 178 Chemicals & Allied Products Sl.No. A1440 The norms covered by this entry shall be substituted by the following :-

(1) (2) (3) (4) (5)
A1440 Ortho Chloro Phenol 1 kg 1. Phenol 1.202 kg
2. Perchloro Ethylene 1.442 kg
7. 178 Chemicals & Allied Products Sl.No. A1446 The norms covered by this entry shall be substituted by the following :-

(1) (2) (3) (4) (5)
A1446 Para Chloro Meta Cresol 1 kg 1. Meta Cresol 1.181 kg
2. Perchloro Ethylene 0.955 kg
8. 237 Chemicals & Allied Products Sl.No. A1764 The description of the export product shall be amended to read as under :-

"Acrylic Fibre"

(1) (2) (3) (4)
9. 250 Chemicals & Allied Products Sl.No. A1853 The description of the import item 5 shall be amended to read as under :-

"5. Zinc Electrolytic (99.95% Purity)".
10. 251 Chemicals & Allied Products Sl.No. A1855 The description of the import item 3 shall be amended to read as Under :-

"3. Zinc Electrolytic (99.95% Purity)".
11. 268 Electronics Products S.No. B26 The norms covered by this entry shall substituted by the following :-

(1) (2) (3) (4) (5)
B26 Copper Clad Glass Epoxy Laminate (FR-4) Single Sided / Double Sided of thickness 1.6 mm 100 sq. Mtrs. 1. Copper Foil (Electrodeposited) *111.95 Sq. Mtr. For Single sided)

**223.90 sq.Mtr. (For double sided)
2. Glass Fabric (Silane Treated 7628 Style) 711.00 Linear Metres (186.0) kgs
3. Epoxy Resin (Brominated Bisphenol Epoxy Resin) 209.00 kgs
4. Thinner & Solvents (Methyl Glycol / MEK / DMF or Methyl cellosolve / DMF) 62.00 kgs
5. Hardeners (Dicynadimide) 4.91 kgs
6. Accelerator (BDMA or 2-Methyl Imidazole) 0.42 kg
7. Release Film (BOPP / TEDLAR / TRIACETATE) 5.96 kgs
8. Padding Paper (kraft Paper) 44.24 kgs
* For Single Sided **For Double Sided
18 Microns
35 Microns
70 Microns		 17.35 kgs
35.26 kgs
70.52 kgs		 34.70 kgs
70.52 kgs
141.04 kgs

(1) (2) (3) (4)
13. 365 Engineering Products Sl.No. C168 After Import item 7, following additional items with quantity shall be added :-
8. Capacitor Net to net.
9. Aluminium Sheet CRCA Sheet (for Blades of Fan) (Only the relevant item used in the export to be allowed) 1.05 kg/kg content in the export product.
14. 365 Engineering Products Sl.No. C171 After import item 6, following additional items with quantity shall be added :-
"7. Capacitor Net to net.
8. Aluminium Sheet CRCA Sheet (for Blades of Fan) (Only the relevant item used in the export to be allowed) 1.05 kg/kg content in the export product.
15. 376 Engineering Products Sl.No. C203 The norms covered by this entry shall be substituted by the following :-

(1) (2) (3) (4) (5)
C203 Electrical Wiring Accessories made of Copper / Copper Alloy & relevant finished parts made of plastic / steel. 1 kg 1. Copper Alloy Ingot / Scrap (Gun metal, Aluminium-bronze)

OR		 1.10 kg/kg content in the export product of appropriate alloy.
1. (a) Copper Wire Bar / Scrap 1.10 kg/kg content in the product.
1. (b) Zinc Ingots

OR		 1.10 kg/kg content in the export product.
1. Brass Scrap 1.10 kg/kg content in the export product.
2. Steel Components, viz. SS/MSG Screws, Nuts, Bolts, Revets, Strips, Washers

OR		 Net to net.
2. (a) SS / MS Wire Rods /Bars 1.15 kg/kg content in the export product.
2. (b) SS / MS Sheets / Plates / Coils 1.15 kg/kg content in the export product.
3. Copper / Copper Alloy Componenets viz. Screws, Nuts, Bolts, Revets, Strips, Washers

OR		 Net to net.
3. (a) Copper / Copper Alloy Wire Rod 1.10 kg/kg content in the export product.
3. (b) Copper / Copper Alloy Sheet. 1.10 kg/kg content in the export product.
4. Plastic Components

OR		 Net to net.
4. Relevant plastic material 1.05 kg/kg content in the export product.
5. Paper Tube

OR		 Net to net.
5. Kraft Paper Electrical Grade 1.05 kg/kg content in the export product.
6. Consumables :
Diesteel, Emery Belt Drills, Reamers, Cutting Oil.		 Upto 2% of FOB value of exports.

(1) (2) (3) (4)
16. 377 Engineering Products Sl.No. C206 The quantity of import item 1 shall be amended to read as under : "1.04 kg/kg content in respect of the product having diameter uptp 0.2mm or 1.02 kg/kg content in respect of the product having diameter above 0.2 mm."
17. 421 Engineering Products Sl.No. C368 In the description of the item 1, the item " / Alloy Steel" shall be added.
18. 422 Engineering Products Sl. No. C370 In the description of the item 1, the item " / Alloy Steel" shall be added.
19. 603 Engineering Products Sl. No. C1318 (Introduced vide Public Notice No. 56 Dated 13.11.97) 1. The quantity of import items 1 & 2 shall be amended to read as "0.515 kg".

2. In the Note below this norms, the figure "3% shall be amended to read as "4%".
20. 651 Food Products Sl.No. E32 The norms covered by this entry shall be substituted by the following :-

(1) (2) (3) (4) (5)
E32 Nutmeg Oil / Oleoresin or combination thereof (percentage of Oil content in the export product should be specified) 1 kg 1. Nutmeg Seed

OR		 5.29 kg/kg of Nutmeg Oleoresin content in the export product.
1. Nutmeg Seed 7.06 kg/kg of Nutmeg Oil content in the export product.
Note : While there will be no oil content restriction in any particular consignment of export, in no case, the overall total weight of Oleoresin and Oil content in the export product shall be lesser than 18% of weight of Nutmeg seed allowed for import.
21. 719 Plastic Products Sl.No. H3 The norms covered by this entry shall be substituted by the following :-

(1) (2) (3) (4) (5)
H3 ABS Briefcases /Suitcases / Beauty cases with / without Aluminium Frame of all sizes. 1 No. 1. ABS moulding Powder /Granules 1.10 kg/kg content in export.
2. LDPE Moulding Powder /Granules 1.05 kg/kg content in export.
3. Polypropylene Moulding Power / Granules 1.05 kg/kg content in export.
4. Aluminium Sheet / Strip 1.05 kg/kg content in export.
5. PVC Compound 1.05 kg/kg content in export.
6. ABS / PVC / Acrylic Film 1.10 kg/kg content in export.
7. Combination Lock / Number / Side Lock and parts thereof Net to net.
8. Relevant lining (Rayon / Polyester / Nylon) 1.10 Sq.Mtr / Sq.Mtr. content in export.
9. Carrying Handle Net to net.
10. Handle Lugs Net to net.
11. Pulling Handle Net to net.
12. Granules of relevant Nylon Chips for manufacture of Frame Moulded Components. 1.05 kg/kg content in export.
13. Glue Foil 1.05 kg/kg content in export.
14. Hot Melt Glue 1.02 kg/kg content in export.
15. Kraft Paper / Board for Lining / Divider 1.05 kg/kg content in export.
16. Fibre / Chip Board 1.05 kg/kg content in export.
17. Relevant Metallic /Non-Metallic components 1.05 kg/kg content in export.
18. Extruded Flexible Plastic Profiles 1.02 Mtr./Mtr. content in export.
19. Relevant Zip Fastener Net to net.
Note : In case of export of coloured items, the relevant colour Master Batch are allowed as an input @0.02 kg/kg weight of Polymer. In case Colour Master Batch is imported, then relevant Polymer at Sl.Nos. 1, 2 & 3 will be reduced to 1.03 kg/kg content in export product.
22. 724 Plastic Products Sl. No. H21 The description of import item 1 shall be amended to read as Under :-

"ABS Resin Powder / Granules".
The quantity will remain unchanges.
23. 724 Plastic Products Sl. No. H23 The description of import item 1 shall be amended to read as Under :-

"HDPE Granules".
The quantity will remain unchanges.
24. 724 Plastic Products Sl. No. H25 The description of import item 1 shall be amended to read as Under :-

"LDPE Granules".
The quantity will remain unchanges.
25. 724 Plastic Products Sl. No. H26 The description of import item 1 shall be amended to read as Under :-

"Nylon 6 Chips / Granules".
The quantity will remain unchanges.
26. 724 Plastic Products Sl. No. H27 The description of import item 1 shall be amended to read as Under :-

"Nylon 66 Chips / Granules".
The quantity will remain unchanges.
27. 724 Plastic Products Sl. No. H30 The description of import item 1 shall be amended to read as Under :-

"Polypropylene Granules".
The quantity will remain unchanges.
28. 725 Plastic Products Sl. No. H31 The description of import item 1 shall be amended to read as Under :-

"Relevant GPPS / HIPS Granules".
29. 768 Plastic Products Sl.No. H241 In the description of the export product the word "Fabric shall be deleted."
30. 700 to 802 General Note for Textiles After Note 14, the following Note shall be added :- "15, Licences issued as perthe norms at Sl. Nos. J270 to J297 shall be with "Actual User" condition and materials imported there against even after the fulfillment of the stipulated export obligation shall not be transferred and the same shall be utilised only for further export production. Custom would accept certification of licensing authority to the effect that input output norms have been met and would not link clearance of export Cargo with the measurement norms of garment being exported and DEEC logging would accordingly be completed in accordance with the Deptt. of Revenue Circular No. 36/97-Cus dated 16.9.97. Items allowed in the norms covered by Sl.Nos. J270 to J297 are for fabrics other than Silk Fabric".

Textile Products

The norms covered by this entry shall Sl.No. J20 be substituted by the following :-

(1) (2) (3) (4) (5)
J20 Blended Flax Fabrics (Grey) containing Flax, Polyester, viscose and Cotton 1 kg 1. Flax Blended Yarn

OR		 1.06 kg/kg content in export.
1a Flax Fibre 1.76 kg/kg content in export.
1b Polyester Fibre

OR		 11.15 kg/kg content in export product.
1b Polyester Yarn 1.065 kg/kg content in export product.
1c Viscose Fibre

OR		 1.115 kg/kg content in export product.
1c Viscose Yarn 1.065 kg/kg content in export.
32. 809 Textile Products Sl.No. J28 In Note 3, below the norms, the "Item 7" shall be corrected to read as "Item 5"
33. 810 Textile Products Sl.No. J30 1. In the description of export products "Dyed and Printed Fabrics" shall be amended to read as "Dyed/Dyed and Printed Fabrics".

2. In Note 1 below this norm, the reference of "Item 2" shall be corrected to read as "Item 5"
34.   Textile Products Sl.No. J51 The norms covered by this entry shall be substituted by the following :-
J51 Grey / Dyed / Printed Fabric with Embroidery 1 Sq. Mtr. 1. Relevant Fabric 1.01 Sq. Mtr.
35. 836 to 845 Textile Products Sl.Nos. J133,J134, J143, J151, J152, J153, J174, J193, J194, J200, J201, J202, J216 and J217 Norms covered by these entries shall be deleted.

Annexure "B" to Public Notice No. 71 Dated 19.02.98
CHEMICALS AND ALLIED PRODUCTS

(1) (2) (3) (4) (5)
A2008 Roxatidine Acetate Hydrochloride 1 kg 1. Piperidine 0.60 kg
2. 3-Amino Propanol 0.815 kg
3. Glycollic Acid 0.36 kg
A2009 Perlite Filteraid 1 kg 1. Perite Ore 1.05 kg
A2010 Triclabendazole 1 kg 1. 3, 4-Dichloro Aniline 1.75 kg
2. 2, 3-Dichloro Phenol 1.71 kg
3. Hydrazine Hydrate (80%) 1.92 kg
4. Isopropyl Alcohol 4.40 kgs
5. Di-Methyl Sulphoxide 3.00 kgs
6. Di-Methyl Formamide 1.25 kg
Note : The above norms are valid upto 30.9.1998.
A2011 Albendazole USP 1 kg 1. N-Propane Thiol 1.14 kg
2. Thio Urea 0.87 kg
3. Methyl Chloro-formate 2.49 kg
4. Hydrazine Hydrate 80% 0.90 kg
A2012 Nimesulide Chloride 1 kg 1. Methane Sulphonyl 0.62 kg
2. Methyl Ethyl Ketone 0.60 kg
A2013 Sulfamoxole Sulfonyl Chloride 1 kg 1. N-Acetyl Amino 1.45 kg
2. Calcium Cynamide 1.00 kg
3. Acetoin 0.52 kg
A2014 Reactive Black BA / TA (Chromazol Black BA / TA) (Dye content Reactive Black 5-45%, Reactive Orange 78-18%) 1 kg 1. H. Acid 0.169 kg
2. Vinyl Sulfone Easter (Acetanilide Based) 0.400 kg
3. J. Acid 0.080 kg
4. Sodium Nitrite 0.100 kg
5. Caustic Soda Flakes 0.100 kg
6. Soda Ash 0.150 kg
7. Sodium Bicarbonate 0.200 kg
A2015 Amlodipine Besylate 1 kg 1. Phthalic Anhydride 1.58 kg
2. Mono Ethanol Amine 0.65 kg
3. Ethyl-4-Chloro Aceto Acetate 1.52 kg
4. Ortho Chloro Benzyldehyde 0.92 kg
5. Mono Methylamine 40% Solution 2.50 kgs
6. Methyl Aceto Acetate 1.90 kg
7. Methylene Chloride 7.50 kgs
8. N-Hexane 3.00 kgs
9. Ethyl Acetate 7.30 kgs
10. Acetic Acid 4.50 kgs
11. Benzene 6.60 kgs
12. Toluene 4.80 kgs
13. Activated Characoal 0.20 kg
Note : The above norm is valid upto 30.6.98.
A2016 Ceftriaxone Sodium 1 kg 1. 7 ACA 0.733 kg
2. 2, 5 Dihydro-2-Methyl -3-Mercapto-5-Oxe-6-Hydroxy-1,2,4,triazine (TAA) 0.32 kg
3. BF Etherate 2.17 kgs
4. Mercapto Benzo Thiazole 4-4-y1-2(2-Amino Thiazolyl) Methoxy Imino Acetate (MAEM) 0.88 kg
5. Triethyl Amine 1.86 kg
6. Acetonitrile 2.865 kgs
7. Methylene Chloride 7.34 kgs
8. Acetone 13.10 kgs
Note : The above norm is valid upto 30.6.98.
A2017 Cephradine USP / BP Crystal 1 kg 1. Potassium Pen. G First 2.86 BOU
OR
1.79 kg
2. Peracetic Acid 1.07 kg
3. Pyridine HBr

OR		 0.54 kg
3. Pyridine 0.27 kg
4. Bis Methyl Silyl Urea

OR		 1.82 kg
4. a)Hexamethyl Disilazane 1.72 kg
4. b)Trimethyl Chloro Silane 0.14 kg
5. Methylene Chloride 1.79 kg
6. Pen. G. Amidase 1.50 gm
7. Hexamethyl Disilane 0.198 kg
8. Trimethyl Chloro Silane
OR
Tetramethyl Guanidine		 0.42 kg
9. Dihydro Phenyl Glycine Danesalt 1.06 kg
10. 2, 6 Lutidine 0.03 kg
11. Pivaloyl Chloride 0.417 kg
12. Quinoline 0.09 kg
13. DMF / Acetone 2.85 kgs
14. Activated Carbon 0.032 kg
A2018 Denatonium Benzoate USP 1 kg 1. Lidocaine Hydrochloride

OR		 1.08 kg
1. a) 2-6 Xylidine 0.60 kg
1. b) Chloro Acetyl Chloride 0.60 kg
1. c) Di-ethyl Amine 0.48 kg
2. Benzoic Acid 0.27 kg
3. Potassium Hydroxide 0.20 kg
4. Dimethyl Formamide 1.50 kg
A2019 Disperse Yellow 54 (51% Dye content) 1 kg 1. 3-Hydroxy Quinaldine-4-Carboxylic Acid 0.378 kg
2. Sodium Ligno Sulfonate 0.490 kg
3. Twichell Oil 0.010 kg
A2020 Colocid Dark Brown SG (CI No. Acid Brown 349) (Dye content 83%) 1 kg 1. H-Acid 0.360 kg
2. Resorcinol 0.123 kg
3. Sodium Nitrite 0.207 kg
A2021 Promethazine Theoclate BP 1 kg 1. Promethazine Hydrochloride 0.82 kg
2. 8-Chloro-Theophyline 0.55 kg
3. dimethyl Formamide 1.37 kg
A2022 Methyl-4-Acetamide -5-Chloro-2-Methoxy Benzoate 1 kg 1. M-Amino Phenol 1.03 kg
2. Potassium Carbonate 2.04 kg
3. Acetic Anhydride 0.80 kg
A2023 Citrizine Dihydro-chloride 1 kg 1. Para Chloro Benzophenon 1.22 kg
2. Peperazin Anhydrous 1.89 kg
3. 2-Chloroethanol 0.48 kg
4. Dimethyl Formamide 1.05 kg
5. Acetone 3.37 kgs
6. Triethyl Amine 0.60 kg
7. Methylene Chloride 3.40 kgs
8. Ethyl Acetate 2.84 kgs
9. Sodium Chloro Acetic Acid 0.55 kg
10. Methanol 0.80 kg
11. Toluene 2.40 kgs
12. Chloroform 2.52 kgs
A2024 Cefazoline Sodium Sterile 1 kg 1. 7-ACA 1.06 kg
2. 2-Methyl-5-Mercaptothiadiazole (MMTD) 0.61 kg
3. Boron Triflouride Etherate 1.65 kg
4. Tetrazolyl Acetic Acid 0.52 kg
5. Pivaloyl Chloride 0.50 kg
6. Diazabicycloun-decence (DBU) 0.49 kg
7. Dichloro Methane / Dimethyl Formamide 0.56 kg
8. Activated Carbon 0.10 kg
Note : The requirement of Item 1 for different percentate of moisture may be worked out in the inverse ratio.
A2025 Palm Fatty Acid Containing Palmitic Acid 63% Stearic Acid 34% 1 kg 1. Crud Palm Stearine Oil 0.805 kg
2. Nickel Catalyst 5.545 gms.
3. Phosphoric Acid 0.500 gm.
4. Bleaching Earth 3.600 gms.
5. Bleaching Carbon 3.600 gms.
A2026 Citric Acid containing 13% Moisture 1 Kg. 1. Commercial Maize Starch 1.318 kg.
2. Caustic Soda Lye 50% 0.150 kg
3. Antiform Oil 0.0036 kg
4. Enzyme Dexthnozyme 0.001 kg
Note : The requirement of item 1 for different percentage of moisture may be worked out in the inverse ratio.
Annexure "C" to Public Notice No. 71 Dated :19.02.1998
ELECTRONICS PRODUCTS

(1) (2) (3) (4) (5)
B214 Optical Fibre 1 km (67 gms) 1. Silica Substrate Tube 11.76 gms
2. Silica Seeving Tube 94.31 gms
3. Silica Inlet Tube 3.88 gms
4. Silica Exhaust Tube 7.80 gms
5. Silica Handle Rod 10.50 gms
6. Silica Extension 39.29 gms
7. Silicon Tetrachloride 34.00 gms
8. Germanium Tetrachloride 4.48 gms
9. Phosphorous Oxychloride 1.79 gms
10. Coating of U. V. Resin 116 gms
Note : The above norms are valid upto 31.3.1998
B215 Optical Fibre Patchcord 1 No. 1. Connectors Net + 2% wastage
2. Potical Fibre Cable Net + 2% wastage
B216 Optical Fibre Pigtail 1 No. 1. Connectors Net + 2% wastage
2. Optical Fibre Cable Net + 2% wastage
B217 Copper Clad Glass Epoxy Laminate (FR-4) Single Sided / Double Sided of thickness 0.8 mm 100 sq. 1. Copper Foil (Electro deposited) *111.95 sq. mtr. (For Single sided)

**223.90 sq. Mtr. (For Double sided)
2. Glass Fabric (Silane Treated 7628 Style) 356.00 Linear Metres
3. Epoxy Resin (Bromina lnated Bispheno Epoxy Resin)(93.0 kgs) 104.50 kgs
4. Thinner & Solvents (Methyl Glycol / MEK / Dmf or Methyl Cellosolve / DMF) 31.00 kgs
5. Hardeners (Dicynadimide) 2.45 kgs
6. Accelerator (BDMA or 2-Methyl Imidazole) 0.21 kg
7. Release Film (BOPP /TEDLAR) TRIACETATE 2.96 kgs
8. Padding Paper (Kraft Paper) 22.12 kgs
*For Sing Sided **For Double Sided
18 Microns
35 Microns
70 Microns		 17.35 kgs
35.26 kgs
70.52 kgs		 34.70 kgs
70.52 kgs
141.04 kgs
B218 Copper Clad Glass Epoxy Laminate (FR-4) Single Sided / Double Sided of thickness 1.0 mm 100 sq. 1. Copper Foil (Electro deposited) *111.95 sq. mtr. (For Single sided)

**223.90 sq. Mtr. (For Double sided)
2. Glass Fabric (Silane Treated 7628 Style) 445.00 Linear Metres (116.25 kgs)
3. Epoxy Resin (Bromina nated Bisphenol Epoxy Resin) 130.60 kgs
4. Thinner & Solvents (Methyl Glycol / MEK /Dmf or Methyl Cellosolve / DMF) 39.00 kgs
5. Hardeners (Dicynadimide) 3.08 kgs
6. Accelerator (BDMA or 2-Methyl Imidazole) 0.26 kg
7. Release Film (BOPP /TEDLAR) TRIACETATE 3.72 kgs
8. Padding Paper (Kraft Paper) 27.65 kgs
*For Sin Sided **For Double Sided
18 Microns
35 Microns
70 Microns		 17.35 kgs
35.26 kgs
70.52 kgs		 34.70 kgs
70.52 kgs
141.04 kgs
B219 Copper Clad Glass Epoxy Laminate (FR-4) Single Sided / Double Sided of thickness 1.2 mm 100 sq. 1. Copper Foil (Electro deposited) *111.95 sq. mtr. (For Single sided)
**223.90 sq. Mtr. (For Double sided)
2. Glass Fabric (Silane Treated 7628 Style) 534.00 Linear Metres (139.50 kgs)
3. Epoxy Resin (Brominanated Bisphenol Epoxy Resin) 156.50 kgs
4. Thinner & Solvents (Methyl Glycol / MEK / Dmf or Methyl Cellosolve / DMF) 47.00 kgs
5. Hardeners (Dicynadimide) 3.68 kgs
6. Accelerator (BDMA or 2-Methyl Imidazole) 0.31 kg
7. Release Film (BOPP /TEDLAR) TRIACETATE 4.47 kgs
8. Padding Paper (Kraft Paper) 33.18 kgs
*For Sin Sided **For Double Sided
18 Microns
35 Microns
70 Microns		 17.35 kgs
35.26 kgs
70.52 kgs		 34.70 kgs
70.52 kgs
141.04 kgs
B220 Copper Clad Glass Epoxy Laminate (FR-4) Single Sided / Double Sided of thickness 2.4 mm 100 sq. 1. Copper Foil (Electro deposited) *111.95 sq. mtr. (For Single sided)
**223.90 sq. Mtr. (For Double sided)
2. Glass Fabric (Silane Treated 7628 Style) 1067.00 Linear Metres (279 kgs)
3. Epoxy Resin (Bromina nated Bisphenol Epoxy Resin) 312.00 kgs
4. Thinner & Solvents (Methyl Glycol / MEK /Dmf or Methyl Cellosolve / DMF) 93.00 kgs
5. Hardeners (Dicynadimide) 7.36 kgs
6. Accelerator (BDMA or 2-Methyl Imidazole) 0.63 kg
7. Release Film (BOPP /TEDLAR) TRIACETATE 8.94 kgs
8. Padding Paper (Kraft Paper) 66.36 kgs
*For Sin Sided **For Double Sided
18 Microns
35 Microns
70 Microns		 17.35 kgs
35.26 kgs
70.52 kgs		 34.70 kgs
70.52 kgs
141.04 kgs
B221 Copper Clad Glass Epoxy Laminate Sided / Double Sided of thickness 3.2 mm 100 sq. 1. Copper Foil (Electro deposited) (FR-4) Single *111.95 sq.mtr. (For Single sided)
**223.90 sq. Mtr. (For Double sided)
2. Glass Fabric (Silane Treated 7628 Style) 1422.00 Linear Metres (372 kgs)
3. Epoxy Resin (Bromina nated Bisphenol Epoxy Resin) 418.00 kgs
4. Thinner & Solvents (Methyl Glycol / MEK /Dmf or Methyl Cellosolve / DMF) 124.00 kgs
5. Hardeners (Dicynadimide) 9.82 kgs
6. Accelerator (BDMA or 2-Methyl Imidazole) 0.84 kg
7. Release Film (BOPP /TEDLAR) TRIACETATE 11.92 kgs
8. Padding Paper (Kraft Paper) 88.48 kgs
*For Single Sided **For Double Sided
18 Microns
35 Microns
70 Microns		 17.35 kgs
35.26 kgs
70.52 kgs		 34.70 kgs
70.52 kgs
141.04 kgs
Annexure "D" to Public Notice No. 71 Dated : 10.02.1998

(1) (2) (3) (4) (5)
C1319 Containers made of Boiler Quality Plate for Chlorine 1 MT 1. Boiler Quality Plates 1.075 MT
2. Welding Wire 9 kgs
3. Welding Flux 11 kgs
Note : The cummulative value of items 2 and 3 shall not exceed 5% of FOB value of exports.
C1320 Integrated Wiring Harness 1 No. 1. Body Clips / Cable Ties Net to Net
2. Cable Channels Net to Net
3. Cacity Plugs Net to Net
4. Connector Covers Net to Net
5. Connectors Net + 2% wastate
6. Conv. Conduits Net to Net
7. Diodes Net to Net
8. End Fittings Net to Net
9. Fuseboxes Net to Net
10. Fuses Net to Net
11. Grommets Net + 3% wastage
12. Moulded Connector Assemblies Net to Net
13. Octane Rating (Resistor) Net to Net
14. PVC Coated Copper Wires Net to Net
15. PVC Tapes Net + 2% wastage
16. PVC Tubes Net to Net
17. Ring Out Labels Net to Net
18. Seals Net to Net
19. Sec. Locks Net to Net
20. Shrink Tubes Net to Net
21. Sleeves Net to Net
22. Splice Chips Net to Net
23. Terminals Net to Net
24. Tesa Bands Net to Net
25. Textile Tapes (Relevant width and length). Net + 2% wastage
26. silicon Spray Net to Net
27. Terrostat Net to Net
C1321 Instrument Cooling Fan for Sleeve Bearing Type 110c AC/115V AC/220V AC/23.V AC/24V AC 1 No. 1. Aluminium Ingot / Aluminium Scrap

OR		 1.05 kg/kg content in the export product.
1. Aluminium Housing Net to net.
3. Self Solderable Enamelled Copper Wire Self Bonding (Electrolytic Grade) Nylon 66/Polycarbonate 1.01 kg/kg content in the export.
5. Expandable Polystrene 1.05 kg/kg content in the export product.
6. Copper Wire / Strip 1.01 kg/kg content in the export product.
7. Label Paper 1.05 kg/kg content in the export product.
8. Components :
a) Housing Clip
b) Lock Washer (Circlip)
c) Insulation Sleeve
d) Brass Insert
e) Shaft
f) Screw with Washer
g) Terminals
h) Finger Guard
i) Polyslider Washer
j) Teflon Washer
k) O-Ring
l) Sintered Bush
m) Inter lock
n) Spring
o) Ball Bearing
p) Brass Washer
q) Hook up wire		 Net to net.
9. Consumables :
a) Epoxy Paint
b) Epoxy Bond
c) Lubricating Oil
d) Cynoacrylic Adhesive
e) Varnish
f) Insulation Tape		 upto 2% FOB value of export.
C1322 Double Fibre Glass Covered /Insulated Round /Rectangular Copper Wire / Strip 1 kg 1. Copper Wire Bar / Wire Rod / Cathode 1.01 kg/kg content in the export product.
2. Glass Fibre Yarn 1.03 kg/kg content in the export product.
C1323 Enamelled Rectangular Copper Wire / Strip 1 kg 1. Copper Wire Bar / Wire Rod /Cathode 1.01 kg/kg content in the export product.
C1324 Enamelled and Double Fibre Glass Covered / Insulated Rectangular Copper Wire / Strip 1 kg 1. Copper Wire Bar / Wire Rod / Cathode 1.01 kg/kg content in the export product.
2. Glass Fibre Yarn 1.03 kg/kg content in the export product.
C1325 Kapton Polyamide Film Insulated Covered Copper Wire / Strip 1 kg 1. Copper Wire / Bar / Wire Rod /Cathode 1.01 kg/kg content in the export product.
2. Kapton Polyamide Film 1.015 kg/kg content in the export product.
C1326 Protective Apron for X-Ray having 0.25 mm/0.35 mm /0.50 mm Lead equivalent thickness 1 No. 1. X-Ray Protective Sheeting of Lead having 0.125 mm / 0.175 mm Lead equivalent thickness 1.05 Sq.Mtr. content in export
Note : The export product is normally Two / Three fold of the thickness of Lead Equivalent Sheet imported. The quality may accordingly be worked out. For Example, in case the thickness of sheet of Lead Equivalent exported is 0.35 mm and the thickness of sheet imported is 0.175 mm, the quantity of import to be allowed is 1.05 x 2 = 2.10 Sq. Mtr. / Sq. Mtr. of Sheet exported. Requirement for other thickness may be worked out in similar way.
C1327 Auto Transformers (Variable Voltage) 1 kg 1. CRGO Silicon Steel Sheet 1.05 kg/kg content in the export product.
2. Electrolytic Copper Insulating Wire 1.01 kg/kg content in the export product.
3. Carbon Brush Blocks 1.05 kg/kg content in the export product.
C1328 Textile Machinery Continuous Open width Chainless Mercerising Machine 1 No. 1. Stainless Steel Sheet Coil SS304 / 316 Quality 1.25 mm to 4 mm 1.05 kg/kg content in the export product.
2. Stainless Steel Rounds / Bars 10 mm to 50 mm 1.02 kg.kg content in the export product.
3. Stainless Stee Pipes 1.25 mm to 3.15 mm 1.05 kg/kg content in the export product.
4. Mild Steel Plate 6 mm to 16 mm 1.05 kg/kg content in the export product.
5. Mild Steel Rounds / Bars 25 mm to 140 mm 1.02 kg/kg content in the export product.
6. Mild Steel Channel 100 x 50 mm Net to net
7. Seamless Tubes 215 to 450 O.D. 1.05 kg/kg content in the export product.
8. C. I. Castings 1.02 kg/kg content in the export product.
9. Tapered Roller Bearings Net to net.
Annexure "E" to Public Notice No. 71 Dated : 19.02.1998
PLASTIC PRODUCTS

(1) (2) (3) (4) (5)
H368 HDPE Knitted Coloured Fabrics HDPE Master Batch 1 kg 1. HDPE Granules 1.07 kg
2. Relevant Colour 0.01 kg
H369 Plastics Insulated Thermowares -Casseroies, Packs, Water, Jugs, Water Water bottles, ABS, Polystyrene) Cold Insulated Flask, Cups, Mugs Gifts of all sizes 1 kg 1. Relevant Polymer (Poly Propylene, HDPE, LDPE Polycarbonate ABS, Polystyrene) 1.05 kg/kg content in the export product.
2. Master Batch 0.03 kg/kg content of polymer the export product.
3. Polyol 0.575 kg/kg content of Polyurethane in the export product.
4. Isocyanate 0.575 kg/kg content of Polyurethane in the export product.
5. Magnetic / Non-Magnetic Stainless Steel Sheets / Coils 1.125 kg/kg content in the export product.
6. Relevant Nylon / Poly Propylene Belt 1.03 Mtr/Mtr in the export product.
7. Metallic Parts net + 1% wastage.
H370 ADCM (CR-39) Spectacle Lenses (Both Sides Finished) 100 Nos. 1. ADCM (CR-39) Spectacle Lenses (Front Side Finished) 105 Nos.
2. Consumables i.e. Smoothing Pad, Polishing Pad, CR-39 Polish Blocking Tape, Diamond Tool Upto 4% of FOB value of export.
Annexure "F" to Public Notice No. 71 Dated : 19.02.1998
TEXTILE PRODUCTS

(1) (2) (3) (4) (5)
J270 Ladies Shirt (Full Sleeve) 1 Pc. 1. Fabric to be used in the Garment 2.75 Sq. Mtrs.
J271 Ladies Shirt (Half Sleeve) 1 Pc. 1. Fabric to be used in the Garment 2.20 Sq. Mtrs.
J272 Men's Shirt (Full Sleeve) 1 Pc. 1. Fabric to be used in the Garment 2.90 Sq. Mtrs.
J273 Men's Shirt (Half Sleeve) 1 Pc. 1. Fabric to be used in the Garment 2.25 Sq. Mtrs.
J274 Children Shirt (Full Sleeve) 1 Pc. 1. Fabric to be used in the Garment 1.90 Sq. Mtrs.
J275 Men's / Ladies Trouser 1 Pc. 1. Fabric to be used in the Garment 2.25 Sq. Mtrs.
J276 Ladies Trouser With Lining 1 Pc. 1. Fabric to be used in the Garment 2.25 Sq. Mtrs. 1.10 Sq. Mtr. (Lining)
J277 Men's / Ladies T-Shirt(Full Sleeve) 1 Pc. 1. Fabric to be used in the Garment 2.60 Sq. Mtrs.
J278 Men's / Ladies T-Shirt(Short Sleeve) 1 Pc. 1. Fabric to be used in the Garment 2.20 Sq. Mtrs.
J279 Children T-Shirt (Large Size) 1 Pc. 1. Fabric to be used in the Garment 2.10 Sq. Mtrs.
J280 Gents / Ladies Sweat Shirt(Full Sleeve) 1 Pc. 1. Fabric to be used in the Garment 2.90 Sq. Mtrs.
J281 Children Sweat Shirt(Full Size) 1 Pc. 1. Fabric to be used in the Garment 2.30 Sq. Mtrs.
J282 Men's Pyjama Set (Please see Note. 1 below) 1 Pc. 1. Fabrics to be used in the Garment 4.80 Sq. Mtrs.
J283 Ladies Pyjama Set (Please see Note. 1 below) 1 Pc. 1. Fabrics to be used in the Garment 4.50 Sq. Mtrs.
J284 Children Pyjama Set (Please see Note. 1 below) 1 Pc. 1. Fabrics to be used in the Garment 3.85 Sq. Mtrs.
J285 Men's Night Dress (Please see Note. 2 below) 1 Pc. 1. Fabrics to be used in the Garment 4.30 Sq. Mtrs.
J286 Ladies Night Dress (Please see Note. 2 below) 1 Pc. 1. Fabrics to be used in the Garment 4.00 Sq. Mtrs.
J287 Children Night Dress (Please see Note. 2 below) 1 Pc. 1. Fabrics to be used in the Garment 3.45 Sq. Mtrs.
J288 Ladies Dress (Please see Note 3 below) 1 Pc. 1. Fabric to be used in the Garment 4.5 Sq.Mtr. & 2.00 Sq. Mtr. for Lining
J289 Ladies Skirts 1 Pc. 1. Fabric to be used in the Garment 3.15 Sq. Mtrs.
J290 Ladies Blouse 1 Pc. 1. Fabric to be used in the Garment 2.45 Sq. Mtrs.
J291 Girl Blouse 1 Pc. 1. Fabric to be used in the Garment 1.85 Sq. Mtrs.
J292 Men's / Ladies Shorts 1 Pc. 1. Fabric to be used in the Garment 1.60 Sq. Mtrs.
J293 Men's Brief 1 Pc. 1. Fabric to be used in the Garment 0.70 Sq. Mtrs.
J294 Ladies Panties 1 Pc. 1. Fabric to be used in the Garment 0.60 Sq. Mtrs.
J295 Co-ordinate set (Comprising of Full Sleeve Top and Trouser) 1 Pc. 1. Fabric to be used in the Garment 4.80 Sq. Mtrs.
J296 Co-ordinate set (Comprising of Half Sleeve T-Shirt & Short) 1 Pc. 1. Fabric to be used in the Garment 3.80 Sq. Mtrs.
Note. 1. PYJAMAS : Consisting of two garments, namely, a garment intended to cover the upper part of the body, generally a jacket type garment or pullover or similar type of garment and a garment consisting of a trouser or short of simple cut with no opening or with an opening at the front.

2. NIGHT DRESS : These garments are made from lighter farbic, vary in length from less than knee length to ankle length. Such night dresses may be eleborately styled with decorating e.g. lace, ribbons, flounces, bows, embroidery, pipings, gathers etc. When made from comparatively heavier fabrics which may be brushed and / or printed, they are more simply styled and may have some decoration.

3. LADIED DRESS : The product covers one piece of garment for the female covering the top of the body and extending to some where from the mid-thigh to feet. It is appropriate to wear without other garments and its lower end encloses both the legs in a single "tube" (rather than two, as trousers.)
J297 Twisted Silk Yarn 1 kg 1. Relevant Raw Silk 1.01 kg/kg content in the export product.
Annexure "G" to Public Notice No. 71 Dated : 19.02.1998
MISCELLANEOUS PRODUCTS

(1) (2) (3) (4) (5)
K109 Manila Ropes (for Steel Wire Ropes) 1 kg 1. Manila Fibre 1.05 kg/kg content in the export product.
2. Spindle Oil / Jute Batchine Oil Upto 10% of weight of Fibre content in the export.

 

Presented by eximkey.com
Trade Intelligence
Search for latest information on item wise exports and imports, from all major Indian ports.

Username
Password
Register now Free ? Forgot Password ?
© Copyright 2022. Asis Industries Ltd . All Rights Reserved