Attention is invited to Paras 7.8, 7.9 and 7.10 of Handbook of Procedures, Vol. 1, 1997-2002, published under the Ministry of Commerce Public Notice No. 1/1997-2002 dated 31.3.1997 and Handbook of Procedure Vol. 2, 1997-2002 published under the Ministry of Commerce Public Notice No. 2/1997-2002 dated 31.3.1997.
2. In the statement of Standard Input-Output Norms following additions shall be made at appropriate places as mentioned below :-
3. In the statement of Standard Input-Output Norms following additions shall be made at appropriate places as mentioned below :-
(1) After Entry No. A-1934, the new entries from SI.No. A-1935 to A-1942 shall be added as per Annexure "B" to this Public Notice.
(2) After Entry No. C-1279, the new entries from SI.No. C-1280 to C-1295 shall be added as per Annexure "C" to this Public Notice.
(3) After Entry No. D-3, the new entries from SI.No. D-4 to D-30 shall be added as per Annexure "D" to this Public Notice.
(4) After Entry No. E-60, the new entries from SI.No. E-61 to E-63 shall be added as per Annexure "E" to this Public Notice.
(5) After Entry No. H-358, the new entries from SI.No. H-359 shall be added as per Annexure "F" to this Public Notice.
(6) After Entry No. J-254, the new entries from SI.No. J-255 shall be added as per Annexure "G" to this Public Notice.
(7) After Entry No. K-102, the new entries from SI.No. K-103 to K-105 shall be added as per Annexure "H" to this Public Notice.
This issues in public interest.
Annexure "A" to Public Notice No. 30 Dated 1.8.1997
| (1) | (2) | (3) | (4) |
|---|
| 6. | 144 & 145 | Chemicals & Allied Products Sl.No. A1030 | The description of import item 3 with quantity shall be substituted by the following :- |
"3. Magnesite Refractory Bricks (For those using only this quality bricks)
OR | 0.0003 MT |
| 3.Magnesite Chrome Bricks | 0.0003 MT |
| 7. | 147 & 148 | Chemicals & Allied Products Sl.No. A1050 | The description of import item 3 with quantity shall be substituted by the following :- |
"3. Magnesite Refractory Bricks (For those using only this quality bricks)
OR | 0.0003 MT |
| 3. Magnesite Chrome Bricks | 0.0003 MT |
| 8. | 148 & 149 | Chemicals & Allied Products Sl.No. A1053 | The description of import item 3 with quantity shall be substituted by the following :- |
"3. Magnesite Refractory Bricks (For those using only this quality bricks)
OR | 0.0003 MT |
| 3. Magnesite Chrome Bricks | 0.0003 MT |
| 9. | 154 | Chemicals & Allied Sl.No. A1120 | The quantity of import item 1, shall be amended to read as 0.80 kg |
| 10. | 203 | Chemicals & Allied Products Sl.No. A1644 | 1. The description of import item 2 shall be corrected to read as under :
"2. 2-Ethyl Thioethanol The quantity will remain unchanged.
2. Item 5 & 6 with quantity shall be substituted by the following :- |
| "5. Mixed Xylene / Methyl Iso Butyl Ketone | 0.511 kg |
| 6. Emulsifier | 0.10 kg |
| 11. | 255 | Chemicals & Allied Products Sl.No.A1883(Introduced vide Public Notice No. 13 dated 5.6.97) | The norms covered by this entry shall be substituted by the following :- |
| (1) | (2) | (3) | (4) |
|---|
| 12. | 255 | Chemicals & Allied Products Sl.No. A1924 (Introduced vide Public Notice No. 21 dated 30.6.97) | The quantity of input items 1 & 2' shall be corrected to read as 0.93 kg and "0.033 kg." respectively. |
| 13. | 256 | Electronics Products Sl.No. B1 | 1. The descriptions of the import item 6 shall be corrected to read as under :
"Aluminium can"
2. The description of the import item 8 with quantity shall be corrected to read as under :- |
| B. Heat Shrinkable (6" PVC Sleeve width) | 1 Roll |
| 14. | 347 | Engineering Products Sl.No. C57 | After import item 8, the following alternative item with quantity shall be added in the relevant column :- |
"OR"
Tyre & Tube (in pair)" | Net to net |
| 15. | 377 | Engineering Products Sl.No. C206 | After item 1, the following additional items with quantity shall be added in the relevant column : - |
| "2. Insulating Enamel / Varnishes | Upto 5% of FOB value of exports |
| 3. Relevant polymer | 1.05 kg/kg content in export. |
| 16. | 421 | Engineering Products Sl.No. C362 | The description of the export product shall be amended to read as under :-
"Casing Pipes of size 4-1/2" OD to 20" OD equivalent to 114.3 mm to 508 mm OD. |
| 17. | 421 | Engineering Products Sl.No. C366 | The description of the export products shall be amended to read as under :-
"Drill Pipes of size 2-3/8" OD to 6-5/8" OD equivalent to 60.25 mm to 168.275 mm OD". |
| 18. | 427 & 428 | Engineering Products Sl.No. C391 | The description of the export products shall be amended to read as under :-
"Production Tubing of size 2-3/8" OD to 4-1/2" OD equivalent to 60.325 mm OD to 114.3 mm OD". |
| 19. | 456 | Engineering Products Sl.No. C475 | The quantity of import item 1 shall read as "1320 kgs". |
| 20. | 493 | Engineering Products Sl.Nos C555 to C557 | Norms covered by these entries shall be deleted. |
| 21. | 509 | Engineering Products Sl. No. C676 | The norm covered by this entry shall be substituted by the following. |
| (1) | (2) | (3) | (4) |
|---|
| 22. | 510 | Engineering Products Sl.No. C677 | Norm covered by this entry shall be deleted. |
| 23. | 511 & 512 | Engineering Products Sl.No. C688 | The description of the export product shall be amended to read as under :-
"Industrial / Automotive Roller Chain (Upto 3/4"Pitch Size) including Spares". |
| 24. | 647 Sl.No. E6 | Food Products | After import item 2, the following additional item with quantity shall be added in the relevant column :- |
| "3. Diluent / Filler | 1.01 kg/kg content in export." |
| 25. | 651 | Food Products Sl.No. E35 | After import item 1, the following additional item with quantity shall be added in the relevant column :- |
| "2. Diluent / Filer | 1.01 kg/kg content in export. |
| 26. | 655 | Handicrafts Sl.No. F1 | The quantity of import shall be amended to read as under :-
"1.25 kg/kg content in export." |
| 27. | 796 | Sports Goods Sl.No. l-3 | The description of the export product with quantity shall be corrected to read as under :-
"Cricket Ball 1 Pc". |
| 28. | 800 | General Note for Textile Products Note 10 | This Note shall be substituted by the following :- |
"Wherever Scoured Wool is allowed for import the same would mean "clean wool".
However, import of Greasy wool (Uncleaned Wool (Scoured Wool) as per the test certificate of the foreign supplier will be taken into account for the purpose of computation of value / quantity." |
| 29. | 815 | Textile Products Sl.No. J44 | After import item 1, the following alternative item with quantity be added in the relevant column :- |
"OR
Flax Fibre | 1.78 kg." |
| 30. | 812,820, 840,842, 844,845, 846,847, 849,851, & 852 | Textile Products Sl.Nos. J36, J66,J172,J180,J181,J210,J212,J218, J224,J225,J228, J229,J235,J241,J243,J244,J245, J247 & J248. | In these entries wherever the item "Raw Wool" is allowed for import, the same shall be amended to read as "Scoured Wool". |
| 31. | 837 | Textile Products Sl.No. J138 | Norms covered by this entry shall be substituted by the following :- |
Annexure "B" to Public Note No. 30 dated 1.8.97
Annexure "C" to Public Notice No. 30 Dated : 1.8.1997
| (1) | (2) | (3) | (4) | (5) |
|---|
| C1280 | Ball Bearing upto and including 50 gms / Bearing | 1000 Nos. | 1. Steel Wire / Bar / Rod | 22 kgs |
| 2. Seamless Steel | 30 kgs |
| 3. Steel Balls | 8250 kgs |
| 4. Cages (Retainer) | 1050 kgs |
| 5. Metal / Rubber Shield | 2100 kgs |
| 6. Consumables | upto 5% of FOB value of export. |
| C1281 | Ball Bearing above 50 gms but upto 100 gms / Bearing | 1000 Nos. | 1. Steel Wire / Bar / Rod | 50 kgs |
| 2. Seamless Steel | 65 kgs |
| 3. Steel Balls | 8360 kgs |
| 4. Cages (Retainer) | 1050 Pairs |
| 5. Metal / Rubber Shield | 2100 Nos |
| 6. Consumables | upto 5% of FOB value of export. |
| C1282 | Ball Bearing above 100 gms but upto 200 gms / Bearing | 1000 Nos. | 1. Seamless Steel Tubes | 230 kgs |
| 2. Steel Balls | 1050 Pairs |
| 3. Cages (Retainer) | 1050 Pairs |
| 4. Metal / Rubber Shield | 2100 Nos |
| 5. Consumables | upto 5% of FOB value of export. |
| C1283 | Ball Bearing above 200 gms but upto 500 gms / Bearing | 1000 Nos. | 1. Seamless Steel Tubes | 570 kgs |
| 2. Steel Balls | 9900 Nos. |
| 3. Cages (Retainer) | 1050 Pairs |
| 4. Metal / Rubber Shield | 2100 Nos |
| 5. Consumables | upto 5% of FOB value of export. |
| C1284 | Ball Bearing above 500 gms but upto 1000 gms / Bearing | 1000 Nos. | 1. Seamless Steel Tubes | 980 kgs |
| 2. Steel Balls | 9130 Pairs |
| 3. Cages (Retainer) | 1050 Pairs |
| 4. Metal / Rubber Shield | 2100 Nos |
| 5. Consumables | upto 5% of FOB value of export. |
| C1285 | Ball Bearing above 1000 gms / Bearing | 1000 Nos. | 1. Inner Race of Bearing (in Ring form) | 1050 Nos. |
| 2. Outer Race of Bearing (in Ring form) | 1050 Nos. |
| 3. Steel Balls | 8800 Nos. |
| 4. Cages (Retainer) | 1050 Pairs |
| 5. Metal / Rubber Shield | 2100 Nos. |
| 6. Consumables | Upto 5% of FOB values of export. |
Note : 1. In respect of norms covered by Sl.No. C1280 to C1285 the material of construction for Inner / Outer Race, Seamless Steel Tubes, Steel Wire / Bar / Rod and Steel Balls should be bearing steel to specification SAE 52100 or equivalent.
2. Consumables allowed for import are Grease, Grinding Wheels, Honding, Stones, Polishing Compound, Diamond Drilling Rollers, Rust Preventing Oil and Chemicals.
3. Import of Shield should be allowed only in respect of Bearings fitted with shield. |
| C1286 | Diesel Engine | 1 No. | 1. Piston Assembly Set | Net to net. |
| C1287 | Taper Rollers for Bearings (SAE-E-52100) | 1 kg | 1. Steel Wire Rods / Wire Coils of 100 CR6 | 1.10 kg/kg content in the export product. |
| 2. Grinding Wheels and Die / Steel Tool | Upto 5% of FOB value of export. |
| C1288 | Ball valve | 1 No. | 1. Steel Balls | Net to Net |
| 2. Disc Spring | Net to Net |
| 3. Hex Hd Bolt | Net to Net |
| 4. Hex Full Net | Net to Net |
| 5. Int. Lock Washer | Net to Net |
| C1289 | Carbon Steel Sub merged Arc Welded Pipes with 3 Layer Polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq. Mtr. | 1 MT | 1. HR Coils / Plates | 1.05 MT |
| 2. Welding Wire | 4.13 kgs |
| 3. Epoxy Powder | 0.119 kg/sq. Mtr. of Pipe |
| 4. Adhesive | 0.261 kg/sq. Mtr. of Pipe |
| 5. Polyethylene | 2.53 kg/sq. Mtr. of Pipe |
| 6. Consumables : Welding Flux, Grinding Wheels, Oil & Lubricants, Cutting Oil, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut-back Taper, Taper, Support Wheel, Prep, Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit and Melt Stick. | Upto 6% of FOB value of exports. |
Note : 1. An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT.
2. A minimum value addition of 60% shall be insisted upon. |
| C1290 | Carbon Steel Sub merged Arc Welded Pipes with 3 Layer Polyethylene coating of 2.5 mm thickness and having coating weight of 3.15 kgs +/- 5% per Sq. Mtr. | 1 MT | 1. HR Coils / Plates | 1.05 MT |
| 2. Welding Wire | 4.13 kgs |
| 3. Epoxy Powder | 0.119 kg/sq. Mtr. of Pipe |
| 4. Adhesive | 0.261 kg/sq. Mtr. of Pipe |
| 5. Polyethylene | 2.91 kg/Sq. Mtr. of Pipe |
| 6. Consumables : Welding Flux, Grinding Wheels, Oil & Lubricants, Cutting Oil, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut-back Taper, Taper, Support Wheel, Prep, Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit and Melt Stick. | Upto 6% of FOB value of exports. |
Note : 1. An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT.
2. A minimum value addition of 60% shall be insisted upon. |
| C1291 | Carbon Steel Sub merged Arc Welded Pipes with 3 Layer Polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq. Mtr. | 1 MT | 1. HR Coils / Plates | 1.05 MT |
| 2. Welding Wire | 4.13 kgs |
| 3. Epoxy Powder | 0.119 kg/sq.Mtr. of Pipe |
| 4. Adhesive | 0.261 kg/sq. Mtr. of Pipe |
| 5. Polyethylene | 3.34 kg/Sq. Mtr. of Pipe |
| 6. Consumables : Welding Flux, Grinding Wheels, Oil & Lubricants, Cutting Oil, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut-back Taper, Taper, Support Wheel, Prep, Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit and Melt Stick. | Upto 6% of FOB value of exports. |
Note : 1. An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT.
2. A minimum value addition of 60% shall be insisted upon. |
| C1292 | Carbon Steel Sub merged Arc Welded Pipes with 3 Layer Polyethylene coating of 3.5 mm thickness and having coating weight of 4.2 kgs +/- 5% per Sq. Mtr. | 1 MT | 1. HR Coils / Plates | 1.05 MT |
| 2. Welding Wire | 4.13 kgs |
| 3. Epoxy Powder | 0.119 kg/sq. Mtr. of Pipe |
| 4. Adhesive | 0.261 kg/sq. Mtr. of Pipe |
| 5. Polyethylene | 4.0 kg/Sq. Mtr. of Pipe |
| 6. Consumables : Welding Flux, Grinding Wheels, Oil & Lubricants, Cutting Oil, CO2 Wire, Rust Preventing Oil, X-Ray Film, Steel Shots, Steel Grits, Brush for cut-back Taper, Taper, Support Wheel, Prep, Tape, Prep. Filler, Heat Shrink Sleeve, Epoxy Promer Kit and Melt Stick. | Upto 6% of FOB value of exports. |
Note : 1. An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT.
2. A minimum value addition of 60% shall be insisted upon. |
| C1293 | Double Fibre Glass covered / Insulated Round / Rectangular Copper Wire Strip. | 1 kg | 1. Copper Wire Bar / Wire Rod Wire Rod | 1.01 kg/kg content in the export product. |
| 2. Glass Fibre Yarn | 1.03 kg/kg content in the export product. |
| C1294 | Filter Packs made of Stainless Steel Wire Mesh (Fitted in Aluminium Rings) | 1 kg | 1. Stainless Steel Wire | 1.10 kg/kg content in the export product. |
| C1295 | Horizontal Split Case Single Stage Double Suction Groove Pump | 1 No. | 1. Mechanical Seal | Net to net. |
| 2. Single Row Deep Ball Bearing | Net to net. |
| 3. CDA-975 Ingot (Silicon Bronze) | 1.05 kg/kg weight of finished Impeller. |
Annexure "D" to Public Notice No. 30 Dated 1.8.1997
| (1) | (2) | (3) | (4) | (5) |
|---|
| D4 | Black Frozen Headless Shell on Shrimp | 1 MT | 1. Frozen Headon Shrimp | 1540 kgs |
| D5 | Black Frozen Headless Shell on Scampi | 1 MT | 1. Frozen Headon Scampi | 2380 kgs |
| D6 | Black Frozen Peeled / Peeled & Deveined Shrimp (Small Shrimp i.e. Count 301 & above per 1b) | 1 MT | 1. Frozen Headon small Shrimp
OR | 2860 kgs |
| 1. Frozen Headless Shellon small Shrimp | 1720 kgs |
| D7 | Black Frozen Peeled / Peeled & Deveined Shrimp (Medium Shrimp Shrimp & Large Shrimp i.e. Count 301 & above per 1b) | 1 MT | 1. Frozen Headon Medium & Large Shrimp
OR | 2000 kgs |
| 1. Frozen Headless Shellon | 1380 kgs |
| D8 | Black Frozen Fan Tail Round / Butterfly Shrimp Shellon Shrimp | 1 MT | 1. Frozen Headon Shrimp
OR | 1960 kgs |
| 1. Frozen Headless | 1720 kgs |
| D9 | Black Frozen Cooked Peeled Shrimp / Blanched Peeled Shrimp Shellon Shrimp | 1 MT | 1. Frozen Headon Shrimp
OR | 2860 kgs |
| 1. Frozen Headless | 1860 kgs |
| D10 | Black Frozen | 1 MT | 1. Frozen Whole Cuttlefish | 1540 kgs |
| D11 | Black Frozen | 1 MT | 1. Frozen Whole Cuttlefish | 3320 kgs |
| D12 | Black Frozen | 1 MT | 1. Frozen Whole Squid | 1540 kgs |
| D13 | Black Frozen Squid Tube | 1 MT | 1. Frozen Whole Squid
OR | 2700 kgs |
| 1. Frozen Whole Cleaned Squid | 1890 kgs |
| D14 | Black Frozen Balanched Squid Rings | 1 MT | 1. Frozen Whole Squid | 4000 kgs |
| D15 | Black Frozen Squid Rings | 1 MT | 1. Frozen Whole Squid | 3330 kgs |
| D16 | Black Frozen Whole Cleaned Octopus | 1 MT | 1. Frozen Whole Octopus | 1330 kgs |
| D17 | Black Frozen Whole Gutted | 1 MT | 1. Frozen Whole Fish | 1200 kgs |
| D18 | Black Frozen Fish Fillets / Fingers | 1 MT | 1. Frozen Whole Fish | 2860 kgs |
| D19 | Black Frozen Fish Steaks | 1 MT | 1. Frozen Whole Fish | 1430 kgs |
| D20 | Black Frozen Cut Crab with Claw | 1 MT | 1. Frozen Whole Crab | 1720 kgs |
| D21 | Black Frozen Crab Meat | 1 MT | 1. Frozen Whole Crab | 9100 kgs |
| D22 | Freeze Dried Shrimp | 1 MT | 1. Frozen Headon Shrimp
OR | 3000 kgs |
| 1. Frozen Peeled Shrimp | 3000 kgs |
| D23 | Canned Shrimp | 1 MT | 1. Frozen Headon Shrimp
OR | 2620 kgs |
| 1. Frozen Peeled Shrimp | 1180 kgs |
| D24 | IQF Breaded & Battered Shrimp | 1 MT | 1. Frozen Headon Shrimp | 1000 kgs |
| D25 | IQF Breaded & Battered Fish | 1 MT | 1. Frozen Whole Fish | 1200 kgs |
| D26 | IQF Rock Lobster Tails | 1 MT | 1. Frozen Whole Rock Lobster | 4000 kgs |
| D27 | IQF Whole Cooked Rock Lobster | 1 MT | 1. Frozen Whole Rock Lobster | 1180 kgs |
| D28 | IQF Sand Lobster Tails | 1 MT | 1. Frozen Whole Sand Lobster | 4000 kgs |
| D29 | Black Frozen Fish Surimi / Minced Fish Meat | 1 MT | 1. Frozen Fish | 4000 kgs |
| D30 | Dried Fish | 1 MT | 1. Frozen Fish | 4000 kgs |
| Note: In case of items at Sl.Nos D4 to D21 and D27 to D30 if the product is in IQF form and net weight is also in forzen form the input quantity shall be less by 9%. Import of items under D3 will not be admissible if the product under item No. 1 above is Black Tiger Shrimp (P. Monodon) or White Shrimp (P. Indicus) and the input (Frozen Headon Shrimp Black Tiger or White) against it has been imported. |
Annexure "E" to Public Notice No. 30 Dated 1.8.1997
Annexure "F" to Public Notice No. 30, Dated 1.8.1997
Annexure "G" to Public Notice No. 30, Dated 1.8.1997
Annexure "H" to Public Notice No. 30 Dated 1.8.1997