Eximkey India DGFT, Customs, Excise, Export Import policy, Foreign Trade Policy and export import data.

DGFT Notification, Circulars... Public Notices Public Notices w.e.f 01/04/1997 PN No. 13(RE-97)/1997-2002 Dated 05-06-1997

EXIM PN NO. 13(PN)/1997-2002 DATED 5-6-1997

Attention is invited to paras 7.8, 7.9 and 7.10 of Handbook of Procedures, Vol. 1/1997-2002 dated 31-3-1997.

2. In the statement of Standard Input-output Norms, amendments at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made at appropriate places as mentioned below:-

CHEMICALS AND ALLIED PRODUCTS
(1) After Entry No. A-1881, the new entries from Sl. No. A-1882 to A-1921 shall be added as per Annexure "B" to this public Notice.
ENGINEERING PRODUCTS
(2) After Entry No. C-1229, the new entries from Sl. No. C-1230 to C-1238 shall be added as per Annexure "C" to this Public Notice.
LEATHER AND LEATHER PRODUCTS
(3) After Entry No. G-42, the new entries from Sl. No. G-43 to G-44 shall be added as per Annexure "D" to this Public Notice.
PLASTIC PRODUCTS
(4) After Entry No. H-349, the new entries from Sl. No. H-350 to H-353 shall be added as per Annexure "E" to this Public Notice.
TEXTILE PRODUCTS
(5) After Entry No. J-251, the new entries from Sl. No. J-252 to J-254 shall be added as per Annexure "F" to this Public Notice.
MISCELLANEOUS PRODUCTS
(6) After Entry No. K-96, the new entries from Sl. No. K-97 to K-101 shall be added as per Annexure "G" to this Public Notice.
This issues in public interest.

Annexure "A" to
Public Notice No. 13,
Dated 5-6-1997

AMENDMENTS / CORRECTIONS

Sl. No.	Page No.	Reference	Amendments / Corrections
(1)	(2)	(3)	(4)
1.	12	Chemicals & Allied Products Sl. No. A45	The norms covered by this entry shall be substituted by the following:

Sl. No.	Export Item		Import Item
Sl. No.	Name	Qty.	Name	Qty.
(1)	(2)	(3)	(4)	(5)
A45	Albendazol USP	1 kg	1. N. Propanol	4.50kgs
			2. Hydrozen cynamide (50%)	0.88kgs
			3. Methyl Cholro Formate	3.00kgs
			4. N. Propyl Bromide	1.057kg
			5. Dimethyl Sulphoxide	2.05kgs
			6. Isopropyl Alochol	5.50kgs

2.	55	Chemicals & Allied Products Sl. No. A320	The description of the export products shall be amended to read as under:- "Norfloxcin / Norfloxacin Hydro Chloride".
3.	178	Chemicals & Allied Products Sl. No. A1451	The description of theimport item 3 shall be amended to read as under:- "3. lon Exchange Resin Catalyst(Specific name to be obtained & added in the licence)
4.	192	Chemical & Allied Products Sl. No. A1451	After import item 2, thefollowing alternative item with quantity shall be added:- "OR Relevant Metal Components -Net to net.
5.	219	Chemical & Allied Products Sl. No. A1704	At the end of description of the export product, the word "/ Gasket" shall be added.
6.	306	Electronics Products Sl. No.B105	The description of the import items 2 and 4 shall be corrected to read as under:- 4. Electron Gun"
7.	693 to 695	Leather Products Sl. No. G25	1. The description of the import item 1. a) and b) shall be amended to read as under:- "1. a) Synthetic Lining / Natural Fur Lining b) Full Insole Socks (Synthetic / Natural Fur Lining)" 2.After Note 4, the following note shall be added:- "5. Natural Fur Lining will be allowed only if it is raflected in the export product."
8.	799 to 801	General Note for Textile Products	1. At the end of the existing Note 2, the following sentence shall be added:- "In case, this value is not adequate for import of items covered by the list of Trimmings and Embellishments or if any item not covered by the list is required, the same may be alllowed by the Licensing Authority on "Net to Net" basis and with Actual User Condition, which has to be accounted for in the D E E C Books. 2. In the list of Trimmings and Embellishments the description of item No. 17 shall be substituted by the following :- "17. All types of Fastners including Snap Fastners, Press Fastners and Zip Fastners."
9.	815	Textils Products Sl. No. J42	1. The description of the export product shall be amended to read as under:- "Fancy / Metallic Yarn with or without Viscose / Nylon Yarn. 2. After import item 2, the following item with quantity shall added:- "3. Nylon Yarn - 1.10 kg/kg content in the export product.
10.	818	Textile Products Sl. No. J57	The norms covered by this entry shall be substituted by the following:-

J57	Non-Woven Interlining made if Man made Fibers containing 70% relevant Man made Fibre and 30% Acrylic Buinder	1 kg	1. Relevant Man made Fibers	0.742kg
			2. Liquid Acrylic Binder (with 45% Solid content)	0.721 kg

11.

826

Textile Products Sl. No.J84

Norms covered by this entry shall be substituted by the following:-

J84	Dyed / Grey Twisted Polyester Texturised Yarn / polyester Filament Yarn	1 kg	1. Polyester Texturised Yarn / Polyester Filament Yarn	1.01 kg/kg content in the export product.
			2. Disperse Dyes (100% Strength)	2.02 kg
Note : Item 2 will be allowed only in case of export of Dyed Yarn.

12.	832 to 836	Textile Products Sl. Nos. J123, J124, J126 to J131	In these Sl. Nos., the description of import item 2 viz.,"Dupion Silk Yarn (Ungummed & Untwisted)" shall be corrected to read as "Dupion Silk Yarn (Gummed and Untwisted)"
13.	862	Miscellaneous Products Sl.No. K4	Norms covered by this entry shall be substituted by the following:

K41	Intra Uterine Contraceptive DeviceCopper T 380 A	100 Nos.	1. Copper Wire (of High conductivity 99.99% pure Copper)	0.02kg
			2. Insert Tube (made of HDPE)	115 Nos.
			3. Pouches (made of coated paper Teminated with Polyester)	110 Nos.
			4. Copper Sleeves (of High conductivity 99.99% Pure Copper)	230 Nos.
			5. Polyprpylene Granules (Gamma Radiation Stabilized Polypropylene)	0.165kg
			6. Compound of LDPE Resin and Barium Sulphate (Granules)	0.49g
			7. PVC Granules	0.125kg
			8. Suture (HDP Fiament)	0.002kg

CHEMICALS AND ALLIED PRODUCTS

Sl.No.	Export Item		Import Item
Sl.No.	Name	Qty.	Name	Qty.
(1)	(2)	(3)	(4)	(5)
A1882	Metalaxyl Technical 94% Min.	1 kg	1. 2,6.Dimethyl Aniline	0.503 kg
			2. Methyl-2-Chloro Propinate	0.509 kg
			3. Methoxy Acetic Acid	0.374 kg
			4. Dimethyl Formamide	0.300 kg
A1883	Ortho Chloro Benzaldehyde	1 kg	1. Ortho Chloro Touene	1 kg
A1884	Hexaconazol Tech.	1 kg	1. N-Valeric Acid 92% Min.	0.426 kg
			2. Thionyl Chloride	1.455 kg
			3. Mehta Dichloro Benzene	0.633 kg
			4. Hydrazine Hydrate	0.455 kg
			5. Potassium Hydroxide	0.806 kg
			6. Formic Acid	0.816 kg
			7. Dimethy I Formamide	0.643 kg
			8. Postassium Carbbonate	0.806 kg
			9. N-Hexane	0.841 kg
A1885	Hard Hardened Chemically Impregnated Board	1 kg	1. Kraft paper (Relevent GSM)	0.88 kg
A1886	Benzaldehyde	1 kg	1. Toluene	0.970 kg
A1886	Benzaldehyde	1 kg	2. Soda Ash	1.110 kg
A1887	Thiopental Sodium Sterile BP	1 kg	1. Thiopental Acid	0.95 kg
A1888	Anilophos 93% Technical	1 kg	1. Para Chloro Isoprophyl Aniline	0.528 kg
			2. Chloro Acetyl Chloride	0.352 kg
			3. Xylene	0.200 kg
			4. Phosphorous Penta Sulphide	0.361 kg
			5. Methanol	0.104 kg
A1889	Pyhridine 98% Min.	1 kg	1. Silica Alumina Catalyst	0.036 kg
A1890	N.C. Kacquer whiteminimum itanium Dioxide content 10% (Pigmented Non-convertible Coatings)	1000Ltrs.	1. Titanium Dioxide (Rutile)	107.90 kgs
			2. Precipitated Silica	8.63 kgs
			3. Toluene / Mixed Xykebe / MIBK	485.51 kgs
			4. Nitrocellulose (1/2 second)	175.20 kgs
			5. Coconut Oil Fatty Acid	15.80 kgs
			6. Isophthalic Acid	12.67 kgs
			7. Orthoxylene	36.80 kgs
			8. Pentaerythritol	12.05 kgs
			9. Benzoic Acid	13.94 kgs
A1891	Di-2-Thyl Hexyl Peroxy di-Carbonate(Luperox 223 E40) with assay of 40%by weight min. andactive Oxygen content of 1.85% by weight minimum	1 kg	1. 2-Ethyl Hexyl Chloroformate	0.489 kg
A1891		1 kg	2. Hydrogen Peroxide 50%	0.087 kg
A1892	Para Amino Benzamide	1 kg	1. Para Nitro Benzoic Acid	1.467 kg
A1893	Postassium Chlorate	1 kg	1. Sodium Chlorate	0.913 kg
A1894	4-Benzylpyridine	1 kg	1. Pyridine	0.520 kg
A1895	Diethylene Triamine	1 kg	1. Ethylenediamine	1.685 kg
			2. Ethylenedichloride	1.131 kg
			3. Caustic Soda	0.194 kg
			4. Ammonia Anhydrous	0.194 kg
A1896	Antimony Tri-Chloride	1 kg	1. Antimony Metal 99.9% Purity	0.6 kg
A1897	4-Amino-3-Nitro Benziopheneone	1 kg	1. 4-Chloro Toluene	0.758 kg
			2. Thionyl Chloride	0.581 kg
			3. Benzene	0.381 kg
A1898	Ethyl Silicate	1 kg	1. Silicon (metalurgiacal Grade)	0.158 kg
A1899	Phenyl Acetone	1 kg	1. Phenyl Acetic Acid	1.56 kg
A1899	Phenyl Acetone	1 kg	2. Acetic Anhydirde	1.17 kg
A1900	Acrolite Fast Carmine PY / Acrolite Fast Red 2300) (G.I.Pigment Red 23)	1 kg	1. Fast Scarlet RC Base (5-Nitro-Anisidine)	0.483 kg
			2. Naphtol ASBS (3-Hydroxy-3-Nitro-2-Naphth-anilide)	0.707 KG
			3. Sodium Nitrite	0.162 kg
			4. Acetic Acid	1.232 kg
A1901	2:4:5 Trichloro Aniline	1 kg	1. 1:2:4 Trichloro Benzene	1.232 kg
A1902	Profenofos Min.87% Tech.	1 kg	1. N. Propanol	0.215 kg
			2. Diethyl Phosphoro chloride Thiote	0.558 kg
			3. Orthochlorophenol	0.422 kg
A1903	Nalidixic Acid	1 kg	1. 2-Amino-6-Picoline	0.785 kg
			2. EMME	1.60 kg
			3. Dimethyl Formamide	0.78 kg
A1904	Amino Trunethylene Phosphoric Acid 50% concentration	1 kg	1. White / Yellow Phosphorous	0.167 kg
A1905	Sulphaethidole N.F.	1 kg	1. Hydrazine Hydrate 80%	0.487 kg
			2. Ammonium Thio-Cynate	0.497 kg
			3. Propionic Acid	0.406 kg
			4. N-Acetyl SulfanilylChloride	1.066 kg
			5. Acetone	0.166 kg
			6. Pyridine	0.24 kg
			7. Caustic Soda	0.80 kg
A1906	Paraffin Wax Candles	1 kg	1. Paraffin Wax (Candle Grade)	1.02 kg
A1907	Sodium Mono Chloro Acetate	1 kg	1. Monochoro Acetic Acid	0.83 kg
A1907	Sodium Mono Chloro Acetate	1 kg	2. Soda Ash	0.470 kg
A1908	Butyl Acetate	1 kg	1. Acetic Acid Glacial	0.544 kg
A1908	Butyl Acetate	1 kg	2. N-Butyl Akcohol	0.672 kg
A1909	Floucinolone Acetonide andNeomycin SulphateSkin Ointement-0.025% W/W 15 gm. tube	1 Lakh	1. Fluocinolone Acetonide	389.20 gms
A1910	Clotrimazole Skin Ointment-1% W/W-15 gms tube	1000 Nos.	1. Clotrimazole	0.154 kg
A1911	Fluocinolone Acetonide with chinoform (Quinodochlor) Skin Ointment-0.025	1 lakhNos.	1. Flucoinolone Acetonide	389.2 gms
A1912	Fluocinolone Acetonide Skin Ointment-0.025% W/W-15 gm. tube	1 lakhNos.	1. Flucoinolone Acetonide	389.2 gms
A1913	Carbamazepine BP/USP	1 kg	1. Ortho Nitro Toluene	3.84 kgs
			2. Cyclohexane	3.07 kgs
			3. Methanol	4.80 kgs
			4. Sodium Methoxide	0.76 kg
			5. N-Butanol	2.19 kgs
			6. Toluene	5.26 kgs
			7. Potassium Hydroxide	0.77 kg
			8. Isopropyl Alcohol	1.69 kg
			9. Acetone	3.95 kg
			10. 5% Palladium on Charcol	0.0126 kg
A1914	Sodium Tertiary Butoxide	1 kg	1. Sodium Metal	0.246 kg
A1914	Sodium Tertiary Butoxide	1 kg	2. Tertiary Butanol	0.848 kg
A1915	Sterile Ampicillin Sodium Crystalline BP / USP	1 kg	1. Ampicillin Trihydrate	1.226 kg
			2. Diethyl Amine	0.263 kg
			3. Sodium Thiocyanate	0.31 kg
			4. Acetonitrile	4.00 kgs
A1916	3 N.N. Bis (2-Hydrixy Ethyl) Amino, 4-Methoxy Acetanilide (100% pure)	1 kg	1. 3-Amino, 4-Methoxy Acetanilide	0.0707 kg
A1917	Lynestrenol BP	1 kg	1. Norendion	1.40 kg
			2. Ethane Dithiol	0.48 kg
			3. Potassium Metal	0.55 kg
			4. Sodium Metal(22% Suspension in Toluene)	0.66 kg
			5. Methylene Chloride	0.50 kg
			6. Methanol	6.12 kg
			7. Toluene	5.23 kg
			8. Ethylene Chloride	.52 kg
			9. D.M.F.	4.96 kg
			10. Ammonium Hydroxide (24%)	0.19 kg
			11. Activated Carbon	0.30 kg
			12. Sodium Bicarbonate	0.57 kg
A1918	4-(-Chlorophenyl) 4-Hydroxy Piperidline	1 kg	1. N-Carbathoxy Piperidone	1.49 kg
			2. Magnesium Turnings	0.18 kg
			3. Tetra Hydro Furan	4.75 kg
			4. Methylene Chloride	5.25 kg
			5. Isoprophyl Alcohol	2.00 kgs
			6. Para Bromo Chloro Benzene	1.66 kg
			7. Potassium Hydroxide	0.80 kg
			8. Acetic Acid	0.426 kg
A1919	2-Amino 6-Picoline	1 kg	1. Sodium Metal	0.293 kg
A1919	2-Amino 6-Picoline	1 kg	2. Alpha Pcioline	0.957 kg
A1920	Benzyhdrol	1 kg	1. Benzophenone	1.1 kg
A1921	ECPP Alanine	1 kg	1. L-Alanine	0.4 kg
			2. Methylene Choride	3.65 kg
			3. Sodium Borohydride	0.12 kg
			4. Pyridine	0.30 kg
			5. Benzoyl Alochol	0.625 kg
			6. Sodium Methoxide	0.50 kg
			7. Ethyl Benzoyl Acrylate	0.60 kg

ENGINEERING PRODUCTS

C1230	Head Pan 1.0 mm Thickness	1 No.	1. CRCA Sheet / Coil 0.7 mm	1.30 kg/kg Content in the export product.
C1231	Multi Cylinder Fuel Injection Pumps for Disel Engines	1 No.	A. RAW MATERIAL: 1. Free Cutting Steel	2.1314 kgs
			2. Ball Bearing Steel	1.8189 kgs
			3. Cold Heading and Cold Extruding Steel Wires	1.0714 kgs
			4. Case Hardening SteelFlats	1.8182 kgs
			5. Profile Steel Bars	2.9762 kgs
			6. Extrusion & Cold Forging Steel Bars / Rods	1.0094 kgs
			7. Aluminium Alloy Ingot	1.2264 kgs
			B. COMPONENTS:
			8. Gasket	12 Nos.
			9. Valve Holder	2 Nos.
			10. Ball	3 Nos.
			11. Screws, all types	34 Nos.
			12. Springs, all types	6 Nos.
			13. Shims	4 Nos.
			14. Washers, all types	20 Nos.
			15. Seal Rings / O Rings / Shaft Seal Rings / Spacer Rings	13 Nos.
			16. Threaded Bushings	2 Nos.
			17. Closer Cap	1 No.
			18. Sliding Sleeve	1 No.
			19. Control Plunger	1 No.
			20. Needle Roller Bearing	1 No.
			21. Tappered Roller Bearings	2 Nos.
			22. Levers	4 Nos.
			23. Flyweight Castings	2 Nos.
			24. Shaft	1 No.
			25. Link Fork	1 No.
			26. Locking Bolt	1 No.
			27. Housings / Stop Housings	1 No.
			28. Connecting Flange	3 Nos.
			29. Valve Plates	4 Nos.
			30. Spring Retainer	1 No.
			31. Sealing Nut	1 No.
			32. Pulling Electro Magnet	1 No.
			33. Feed Pump	1 No.
			34. Guide Bushing	1 No.
			35. LDA / Manifold Prussure compensator	1 No.
			36. Template	1 No.
			37. Roller Tappet Body	4 Nos.
			38. Stop Bracket	1 No.
			39. Lever Shaft	1 No.
			40. Bearing Shell	1 No.
			41. Curve Template	1 No.
			42. Link	1 No.
			43. Screw Plug	2 Nos.
			44. Strap	2 Nos.
			C. CONSUMBLES:
			45. Calibration Fluid (Test oil)for Diesel Injection Pump	Upto 4% of FOB value of export
			46. CBN / Diamond Honing Stick Blanks / Support Stone / Deburring Tools
			47. Hone Holders
			48. Plain Grinding Wheels / Disc Wheels for Lap / Match Grinding CBN Wheels
			49. Carbude End Mills / Tools
			50. Gear Shaper
			51. Diamond Dresser
			52. Deep Hole Drills
			53. Reamers
			54. Oil Stones
			55. BFroaches
			56. Drills
			57. Rack Milling Cutters
			58. Machine Taps
			59. Filter Paper / Media
			60. Super Finishing Stones
C1232	Taper roller Bearings upto and including 400 gms per bearing weight	1000 Nos.	1. Forged / Turned Inner Ring (Cone) in unfinished condition	1100 Nos.
			2. Forged / Turned Outer Ring	1100 Nos.
			3. Finished Cages (Retainer)	1010 Nos.
			4. Finished Rollers OR	17000 Nos.
			4. Cold Drawn Wire OR	110 Nos.
			4. Wire Rod	115 kgs.
			5. Consumbales viz. GrindingWheels, Honing Stones, Diamond Drenning Roller, Rust Preventing Oils, Cutting Fluid, Anti Foaming Agent for Coolant, Hydraulic oil,Anti Corrosion Lubricant	Upto 5% of FOB value of export
C1233	Taper Roller Bearings above 400 gms per bearing but upto and inculding 800 gms per bearing weight	1000 Nos.	1. Forged / Turned Inner Ring (cone) in unfinished condition	1100 Nos.
			2. Forged / Turned Outer Ring (cup) in unfinished condition	1100 Nos.
			3. Finished Cages (Retainer)	1010 Nos.
			4. Finished Rollers OR	17170 Nos.
			4. Cold Drawn Wire OR	285 kgs.
			4. Wire Rod	299 kgs.
			5. Consumbales viz. Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, cutting Fluid, Anti Foaming Agent for Coolant, Hydraulic Oil, Honing Oil, Anti Corrosion Lubricant	upto 5% of FOB value of export
C1234	Taper Roller Bearing above 800 gms per bearing but upto and including 1200 gms per bearing weight	1000 Nos.	1. Forged / Turned Inner Ring (cone) in unfinished condition	1100 Nos.
			2. Forged / Turned Outer Ring (cone) in unfinished condition	1100 Nos.
			3. Finished Cages (Retainer)	1010 Nos.
			4. Finished Rollers	18580 Nos.
			5. Consumbles viz. Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Cutting, Fluid Anti Foaming Agent for Coolant, Hydraulic Oil, Honing Oil, Antie Corrosion Lubricant	Upto 5% of FOB value of xport
C1235	Taper Roller Bearings above 1200 gms per bearing but upto and including 1600 gms per bearning weight	1000 Nos.	1. Forged / Turned Inner Ring (cone) in unfinished condition	1100 Nos.
			2. Forged / Turned Outer Ring (cup) in unfinished condition	1100 Nos.
			3. Finished Cages (Retainer)	1010 Nos.
			4. Finished Rollers OR	18380 Nos.
			4. Cold Drawn Wire OR	574 kgs
			4. Wire Rod	603 kgs
			5. Consumables viz, Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Cutting Fluid, Anti Foaming Agent for Coolant, Hydraulic Oil, Anti Corrosion Lubricant	Upto 5% of FOB value of export
C1236	Taper Roller Bearing above 1600 gms per bearing but upto and including 2000 gms per bearing weight	1000 Nos.	1. Forged / Turned Inner Ring (Cone) in infinished condition	1100 Nos.
			2. Forged / Turned Outer Ring (Cup) in unfinished condition	1100 Nos.
			3. Finished Cages (Retainer)	1010 Nos.
			4. Finished Rollers OR	17170 Nos.
			4. Cold Drawn Wire OR	629 kgs.
			4. Wire Rod	660 kgs.
			5. Consumables viz. Gringing Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Cutting Fluid, Anti Foaming Agent for Coolant, Hydraulic Oil, Anti Corrosion Lubricant	Upto 5% of FOB value of export
C1237	Taper Roller Bearing above 2000 gms per bearing but upto and including 2400 gms per bearing weight	v1000 Nos.	1. Forged / Turned Inner Ring (Cone) in infinished condition	1100 Nos.
			2. Forged / Turned Outer Ring (cup) in unfinished condition	1100 Nos.
			3. Finished Cages (Retainer)	1010 Nos.
			4. Finished Rollers OR	20100 Nos.
			4. Cold Drawn Wire OR	729 kgs.
			4. Wire Rod	832 kgs.
			5. Consumbles viz. Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Cutting Fluid, Anti Foaming Agent for Coolant, Hudraulic Oil, Anti Corrosion Lubricant	Upto 5% FOB value of export
C1238	Taper Roller Bearings above 2400 gms per bearing weight	1000 Nos.	1. Forged / Turned Inner Ring (Cone) in unfinished cindition	1100 Nos.
			2. Forged / Turned Outer Ring (Cup)	1100 Nos.
			3. Finished Rollers (Retainer)	1010 Nos.
			4. Finished Rollers OR	16160 Nos.
			4. Cold Drawn Wire OR	1300 kgs.
			4. Wire Rod	1365 kgs.
			5. Consumabled viz, Grinding Wheels, Honing Stones, Diamond Drenning Rollers, Rust Preventing Oils, Cutting Fluid Anti Foaming Agent for Coolant, Hydraulic Oil, Honing Oil, Anti Corrosion, Lubricant	Upto 5% of FOB Value of export
Note: In respect of Sl. No. C1232 to C1238, material of construction for import appearing at Sl. No. 1,2, and 4 in each weight range shall be bearing quality alloy steel to grades SAE 52100 / 862OH / 20 Hi-MC / 8219 R or equivalent.

LEATHER AND LEATHER PRODUCTS

G-43	Gents and Boys Leathr Chappals Slippers with Leather Sole or Synthetic Sole	1 Pair	1. PVC Leather Cloth or Velvets	2 sq.ft.
			2. Full Insole Socks (Synthetic)	0.5 sq.ft.
			3. Artificial Leather or P.U. Leather Cloth	1.80 sq.ft
			4. Stamping Foils,	4 sq. inches
			5. Adhesive (P.U.)	30 gms.
Note : Item 2 shall be allowed only if it is use for manufacture of the export product.
G-44	Ladies & Girls Leather Chappals. Slippars and Sandals	1 Pair	1. PVC Leather Cloth or Velvets	2 sq.ft.
			2. Full Insole Socks (Synthetic)	0.4 sq.ft.
			3. Artifical Leather or P.U. Leather Cloth with Leather Sole	1.20 sq.ft.
			4. Stamping Foils and Synthetic Sole	4 sq.ft.
			5. Adhesive (P.U.)	30 gms.
Note : Item 2 shall be allowed only if it is used for manufacture of the export product.

PLASTIC PRODUCTS

H350	Nyon 612 Monofilament Yarn	1 kg	1. Nylon 612 Resin (Extrusion Grade) (Dia 0.15 mm to 0.3 mm) in cut hanks upto miximum lenght of 48" for toothbrush bristles	1.13 kg/kg of Nylon Monofilament Yarn in export product.
			2. Nylon Colour concentrate / master batch	0.02 kg
			3. Paper Wrapper	0.05 kg
			4. Glue - Dextrine	0.05 kg
			5. Spin Finish Silicon Emulsion	0.005 kg
			6. Spin Finish Organic Surface Active Agent	0.0008 kg
			7. Spain Finish Antifoam Compound	0.0005 kg
Note : The Nylon colour concentrate / master batch will be allowed for coloured Nylon Monofilament Yarn only. In case of Uncoloured Monofilament Yarn, the Nylon 612 Resin will be allowed as 1.15 kg instead of 1.13 kg against item No. 1 of the inputs.
H351	Industrial Endless Syntheic Forming Fabric of Single Layer mde out of Poluester and Nylon	1 kg	1. Polyester Monofilment Yarn of relevent	0.84 kg
			2. Nylon Monofilamnt Yarn of relevant denier	0.36 kg
H352	Industrial Endless Synthetic Forming Fabric of Multiple Layer made out of Polyester and Nylon	1 kg	1. Polyester Moofilament Yarn of relevant denier	1.0 kg
			2. Nylon Monofilament Yarn of relevent denier	0.20 kg
H353	Dipped Nylon Braided cord	1 kg	1. Nylon Filament Yarn (Tyre Yarn)	1.02 kg/kg content in the export product.
			2. Resorcinol	0.001 kg
			3. V.P. Latex	0.04 kg

TEXTILE PRODUCTS

J252	Breches of Woven /Knitted Fabric with full seat of artifical Leather Cloth	1 No.	1. Artifical Leather Cloth	1.05 kg/kg content in export
J253	Woven Muffle containing Mohair Yarn and Polyster Fialment Yarn	1 kg.	1. Mohair Top	1.18 kg/kg content in the export product.
			2. Polyester Texturised yarn	1.05 kg/kg content in the export product.
J254	Dyed / Printed Polyester-Viscose Fabric Blended	1 kg	1. Polyester-Viscose Blended Fabric (Grey)	1.02 kg/kg content in the export product.
			2. Disperse Dye (100% Strength)	0.02 kg/kg of Polyester material content in the export product.

MISCELLANEOUS PRODUCTS

K97	Pre-lubricated Jute Rope / Core Rope (Multifold)	1 kg	1. Jute Fibre OR	1.08 kg/kg content in the export product.
			1. Jute Yarn	1.03 kg/kg content in the export product.
			2. Batch Oil	0.025 kg
			3. Lubricants	0.025 kg
K98	100% Sisal Mattings Rugs	1 kg	1. Sisal Yarn	1.07 kg
K99	Sisal Mattings Rugs Panama Herring Bone	1 kg	1. Sisal Yarn	1.05 kg/kg content in the export product.
K100	Printed Labels made of White Coated Paper	1 kg	1. White Paper Coated other than Ivory Board	1.15 kg
K101	Printed Sanwitch Paper Wrapper / Bags	1 kg	1. Vegetable Perchment Paper	1.05 kg

Presented by eximkey.com

Trade Intelligence

Search for latest information on item wise exports and imports, from all major Indian ports.

Username

Password