Policy Circular No 39(RE-00)/2000-2001 Dt. 14-02-2001- Sub:-
- Consideration of application under paragraph 6.8 of the Handbook(Vol.1) without reference to Headquarters EPCG Committee.
Attention is invited to paragraph 6.8 of the Handbook (Vol.1). wherein it has been stated that in such cases where nexus norms have already been communicated by the Headquarters or the same are already established on the basis of the EPCG licences issued in the past by the Port Offices, such applications may not be forwarded tothe Headquarters EPCG Committee.
In addition to the items covered by the Lists given in Annexures to the
Policy circular No.3 (RE2000)/1997-2002 dated 7-4-2000 and
Policy Circular No 10 (RE-00)/ 2000-2001 dated 14.06.2000 , it has been decided that in respect of the items given in the Annexure to this Circular ,EPCG licences upto Rs.50 Crores may be issued by the RLA’s concerned without referring such applications to Headquarters EPCG Committee.
This issues with the approval of the DGFT.
Bipin Menon
Dy.Director General of Foreign Trade
ANNEXURE TO POLICY CIRCULAR NO.39(RE-2000)/1997-2002 DT.14/02/2001- CHEMICALS & ALLIED PRODUCTS
- Drugs and Pharmaceuticals:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | TABLETS, CAPSULES, INJECTIONS, BULK DRUGS & DRUG INTERMEDIATES | 1. HEAD SPACE SAMPLER |
| (2) | IBUPROFEN, NAPROXEN RANITIDINE HCL/BASE AND OTHER BULK DRUGS | 1. COMPRESSOR |
| 2. LIQUID CHROMATOGRAPHY SYSTEM |
| 3. HPLC SYSTEM |
| (3) | PHARMACEUTICAL FORMULATIONS | 1. TRANSFORM INFRA RED SPECTROPHOTOMETER |
| 2. NACL DEMOUNTABLE CELL |
| 3. SHIMADZU HPLC CONSISTING OF TVP LIQUID PUMP, SPECTROPHOTOMETER DETECTOR |
- Petro-chemical Products:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | DECHLORINATION CATALYST | 1. PULSE CHEMISORB WITH TPD/TPR |
| 2. TPD/TPR OPTION |
|
- Plastics:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | KITCHENWARE, TABLEWARE, INSULATEDWARE OF PLASTIC | 1. INJECTION MOULDING MACHINE |
| 2. RUBBER ROLLER HEAT TRANSFORMER MACHINE |
| 3. PET PREFORM MOULDS |
| 4. HOPPER DRYER |
| 5. AUTO LOADER |
| 6. RATIO MIXING VALVE |
| 7. CHILLER |
- Others:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | ROUGH GRANITE BLOCKS | 1. TAURUS 2516/1 |
| 2. TUSKER TURBO TRACTOR |
| 3. COMET ALCO |
| (2) | GRANITE SLABS, TILES, BLOCKS | 1. DOUBLE BRIDGE GRANITRON LINE |
| 2. SLAB POLISHING MACHINE |
| 3. AIR DRYING UNIT |
| 4. HANGING CONTROL MONITOR |
| (3) | DRESSED MARBLE BLOCKS, POLISHED MARBLE SLABS & TILES | 1. HYDRAULIC EXCAVATOR |
| 2. CHAIN SAW MACHINE |
| 3. STONE CUTTING MACHINE |
| (4) | PRECURED TREAD RUBBER AND OTHER ALIED RUBBER MANUFACTURED PRODUCTS | 1. RHEOTECH OD+ OSCILATING DISK RHEOMETER |
| (5) | GLASS ARTWARES | 1. GLASS PLANTS AND CUTTING MACHINE |
| (6) | MOSQUITO COILS | MOSQUITO COIL MAKING MACHINE CONSISTING OF
1. CHEMICAL TANK |
| 2. KNEADER |
| 3. CRUSHER |
| 4. EXTRUDER |
| 5. CUTTER |
| 6. STAMPING MACHINE |
| 7. CONVEYOR BELTS |
| (7) | DYES & DYE INTERMEDIATES | 1. COLOR-EYE 7000A SPECTROPHOTOMETER |
| 2. LASER DIFFRACTION PARTICLE SIZE ANALYSER WITH WINGS SALD DATA PROCESSING SOFTWARE |
| 3. STATIC CONVERTER INVERTER |
| (8) | SINGLE/DOUBLE SIDE DECORATIVE LAMINATES WITH/WITHOUT BARRIER PAPER AND INDUSTRIAL LAMINATES | 1. WIDEBELT SANDER KUNDIG |
| 2. PRESS PLATES |
| 3. S.S. FLAT PRESS MOULDS |
| (9) | DECORATIVE LAMINATED SHEET | 1. STAINLESS STEEL PRESS MOULDS |
| 2. S.S. FLAT PRESS MOULDS IN STEEL GRTADE |
| (10) | GARNET ABRASIVES | 1. BOXMAG RABID IRB 2,750M BOXMAG RABID HIGH INTENSITY INCLUDED ROLL SEPRARATOR |
ELECTRONICS SECTOR| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | COLOUR TELEVISION SETS | 1. EYELET MACHINE |
| (2) | VIDEO PROJECTORS/ DATA
PROJECTORS, DATA MONITORS
OUTPUT UNITS, PARTS
ACCESSORIES (VIDEO
SWITCHERS, VGA INTERFACES)
FOR THE SAME PCBS
ASSEMBLIES, SHEET METAL
PARTS | 1. TIMING BELT |
| 2. SUNX PHOTO SENSOR |
| 3. BEVEL GEAR SET |
| 4. TENSION SPRING |
| 5. DIODE UF4004 |
| 6. BLACK TUBING 0D4.0 |
| 7. ENCODER 260 SIMPATROL ACTUATOR |
| 8. SPRING PLUNGER |
| 9. BALL ENDED SCREW |
| 10. LOCATOR SCREEN MOUNT 260 |
| 11. PROCESSOR PCB ASSY |
| 12. PRINTHEAD POSITION LOOM BOM |
| 13. SQY LLOME/AWAY LOOM BOM |
| 14. LOAD CELL LOOM BOM |
| 15. SQY MOTOR LOOM BOM |
| 16. SAFETY INTERLOCK SWITCH |
| 17. 260 ENERGY BOARD |
| 18. MOTOR BRUSH, SIMPLATROL |
| 19. TIMING BELT |
| 20. MOTOR AND ENCLODER ASSEMBLY |
| 21. SHOCK ABSORBER |
| 22. PRESSURE BOARD ASSEMBLY |
| 23. SA SQUEEGEE SENSOR LOOM BOM |
| 24. SWITCH PART |
| 25. FLEXO 123206 SPRING |
ENGINEERING SECTOR- Industrial Machinery:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | ELECTRICITY ENERGY METERS,
HYBRID MICRO CIRCUITS OF
ALL TYPES, SURFACE MOUNT
ASSEMBLIES OF ALL TYPES
ELECTRONICS, ENERGY METERS
AND PARTS AND ACCESSORIES
OF ABOVE | FULLY ELECTRONICS AUTOMATIC
TEST STATION CONSISTING OF:-
1. FULLY ELECTRON POWER SUPPLY |
| 2. THREE PHASE REFERENCE METER |
| 3. METER SUSPENSION RACKS |
| 4. SCANNING HEADS WITH FIXATION DEVICE |
| 5. ERROR DISPLAY UNITS |
| 6. COMPLETE CABLE SET |
| 7. SOFTWARE CALIBRATION AND VERIFICATION |
| 8. OPERATING MANUAL |
| 9. AUTOMATIC TEST SYSTEM |
| (2) | FUEL INJECTION EQUIPMENT & COMPONENTS | 1. VERTICAL MACHINING CENTRES |
| 2. DUPLEX MILLING MACHINES, |
| 3. 12 STATION RUNNING BENCH |
| 4. CALIBRATION TEST BENCH |
| 5. DIGITAL STORAGE OSCILLOSCOPE, |
| 6. STRAIN GAUGE LINE PRESSURE TRANSDUCERS |
| (3) | MACHINED COMPONENTS | 1. CNC LATHE |
| (4) | ELECTRICAL MOTOR STAMPING & TRANSFORMER LAMINATIONS | CNC WIRE CUT ELECTRICAL DISCHARGE MACHINE |
- Bicycle and Bicycle Parts:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | BICYCLE TYRES AND TUBES | 1. LH DRIVE RUBBER MIXER |
| 2. OSCILLATING DISC RHEOMETER (ODR) |
| 3. COLD FEED EXTRUDER |
- Iron and Steel Items:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | CAST ARTICLES IN NON-FERROUS METALS | 1. HORIZONTAL COLD CHAMBER HIGH PRESSURE DIECASTING MACHINE |
| (2) | STAINLESS STEEL FITTINGS, STAINLESS STEEL VALVES, STAINLESS STEEL TANKS, PUMP, PUMP PARTS, ROAD MILK TANKERS, PLATE HEAT EXCHANGERS, PNEUMATIC ELEVATORS AND CONVEYORS, CIP SYSTEMS, BULK MILK COOLING TANKS, GHEE/OTHER STORAGE TANKS OR PARTS THEREOF | 1. CNC LATHE |
| (3) | GREY / DUCTILE IRON CASTINGS | 1. MAKINO MAX 65 A20 WITH PRO3 WITH SUPER GI |
| 2. PARPAS L1 CSD TWIN SPINDLE CNC MILLING MACHINE |
| 3. RADIOGRAPHY X RAY EQUIPMENT |
| (4) | STEEL CASTING | 1. CONTINUOUS SAND MIXER |
| 2. SAND RECLAMATION SYSTEM |
- Others:-
| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | FILTER ELEMENTS AF63D & AF85D | PAPER CLIPPING MACHINE |
| (2) | NUTS AND FASTNERS | 1. PNEUMATIC FOUR SPINDLE TAPPING MACHINE |
| 2. ELECTRICAL FITTINGS |
| (3) | CNC MACHINED COMPONENTS, DIES & MOULDS | 1. CNC VERTICAL MACHINING CENTRE |
FOOD PRODUCTS| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | FROZEN MEAT | 1. BAND SAW |
| 2. VACCUM FILLING MACHINE |
| 3. POLYCLIP DOUBLE CLIP MACHINE |
| (2) | FROZEN MARINE PRODUCTS | 1. RECIP. COMPRESSOR |
| 2. PLATE FREEZER |
| 3. EVAPORATIVE CONDENSER |
| 4. EVAPORATOR |
| 5. COMPLETE REFRIGERATION PLANT |
| 6. FREEZING PANS |
| (3) | SPICE OILS AND OLEORESINS | 1. METTLER ELECTRONIC ANALYTICAL BALANCE |
| (4) | DAIRY PRODUCTS, CATELFEED PRODUCTS | 1. INSTALAB 600 NIR ANALYSER |
| (5) | PROCESSED FOODS | 1. WEIGHERS |
| 2. BAGMAKERS COMPLETE WITH POKERS |
| 3. GAS FLUSIHING |
| 4. SEMICUT |
| 5. DUGH MACHINE |
| 6. CONVECTION BAKE OFF |
| 7. HIGH POWER OIL FILTER |
| 8. LABORATORY COATING TUMBLER |
| 9. INK JET PRINTERS |
Gem & Jewellery/Cut and Polished Diamonds| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | CUT AND POLISHED DIAMONDS | 1. LASER SYSTEM FOR DIAMOND SAWING |
| 2. SOFTWARE FOR SAWING |
| 3. TWO SIDE SAWING REVOLVING CASSETTES (TSS) UNIT |
| 4. TWL TELESCOPE |
| 5. Z-AXIS ENCODER |
| 6. SOFTWARE OPERATING SYSTEM |
| 7. DIA-EXPERT SYSTEM WITH COMPUTER SYSTEM, SOFTWARE ETC. |
| 8. DIASCAN SYSTEM |
| (2) | 22 CT. JEWELLERY | 1. PUMP-1.1 KW & KIT |
| (3) | GOLD JEWELLERY | 1. JEWELLERY TESTING INSTRUMENT WITH SAMPLE CHAMBER, AIR COOLED X-RAY TUBE, ANALYTICAL SOFTWARE, COMPUTER, MONITOR, KEYBORD |
MISC. INDUSTRY| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | BOARD GAMES, ART CALENDERS, COLOUR PRINTED BOOKS, STATIONERY PRODUCTS, DAIRY, NOTE BOOK, REGISTER, WRITING PADS, PLAYING CARDS,ETC. | 1. COLOUR OFFSET PRESS |
| (2) | TREATED RUBBER WOOD PRODUCTS, FURNITURE BULDING MATERIAL, HAMMOCKS, LAMINATED FURNITURE, ELECTRIC GUITARS, TOYS, MUSICAL INSTRUMENTS | 1. AUTOMATIC ROUND-END TENONER |
| 2. AUTOMATIC SLOT MORTISER |
| 3. ‘SICAR’ COMBINED MACHINE |
| 4. HEAVY DUTY AUTO COPY SHAPING MACHINE |
| 5. SLIDING HEAD ROUTER |
| 6. DOUBLE SPINDLE MOULDER |
| (3) | BUTTONS & BUTTON BLOCKS | DOUBLE VANGUARD MULTIGRIP: (BASE W/OUT UNITS) AUTOMATIC MACHINE |
SERVICE SECTOR| Sl.No. | Export Product | Capital Goods which can be imported |
|---|
| (1) | VIDEO SOFTWARE | 1. CD PLAYER |
| 2. REMOTE CONTROLLER |
| 3. DAT RECORDER |
| 4. 16 CHANNEL DIGITAL AUDIO UPGRADE KIT |
| 5. PROFILE DISK RECORDER AUDIO CHANNELS |
| 6. NTSC/PAL DECODER |
| 7. NTSC/PAL ENCODER |
| 8. STEREO AUDIO DISTRIBUTION AMPLIFIERS |
| 9. REAR CONNECTOR |
| 10. 3U RACKFRAME |
| 11. PASSIVE 10 WAY AUDIO BALANCING UNIT |
| 12. TSL AUDIO MONITORING DISPLAY |
| Hotel Service | 1. STATUES |
| 2. DECORATIVE LIGHT FITTINGS |
| 3. ARTEFACTS |
| 4. FLOWER VASES & DECANTERS |
| 5. FOUNTAINS |
| 6. TIMBER FLOORING & SKIRTING |
| 7. WALL HUNG WC(s) |
(Please refer
Cir. No. 20/2003, DT. 14/11/2003 for Certification of nexus under EPCG Scheme)
Presented by eximkey.com